How long are OEM Nissan S14 front studs?

[EndLeSS8]

Part number 43222-70T00

How long are OEM Nissan S14 front studs?

Nismo makes 50mm and 60mm, but how long are the factory studs?
What's the largest spacer you can run on stock studs, safely?

Thanks.

[az_240]

Edit: stock is 50mm... I have some in my garage. You could probably get away with some 5mm spacers but I personally would not run spacers on stock studs.

I'd get some nismo 60mms if you are planning on running spacers. I have them and they work good.

[Junkd']

1" = 25.4mm

1.75" = 44.45mm

[projectRDM]

I could have sworn the OE studs were 43mm. Maybe I'm delirious.

[az_240]

crap I think you're right... I just checked them and they are 1 3/4" which would be right around 43mm. my b.

[EndLeSS8]

Thanks for the heads up guys.

I made a dumb mistake, which is why I asked for OEM stud length.
Bought 3mm spacers, bought 60mm Nismo studs
Nismo studs too long for my lugnuts, so running 3mm spacers on stock studs.
Realized 3mm spacers weren't completely flush (I need either a 5mm or add another 3mm)
So I need to sell my 60mm studs, and buy 50mm studs.

[xkamikazestormx]

buy open ended lug nuts

[joshchewuhh]

damn ryota posting??? miracle!


but seriously though get open ended lug nits. done

[negrosx13]

^^^^ end of that story..
noobish question but somewhere i read like 2years ago someone used the studs off a j30 or q45 on there s13,just wondering how true is this. Can it be done?

[EndLeSS8]

Can't get open ended cuz my mcgard wheel locks are fixed length

[negrosx13]

ohh makes sense now:-/