need some help/info on z32 brakes

[mista808]

could really find a definite answer anywhere so....

i got a 95 Q45, stock brakes front and rear. i also have 19x9.5 up front and 19x10.5 in the rear. between the stock front caliper and face of the rim i have between 1/2"-3/4" clearance.. and the rear, about or over 1"... would i be able to fit stock z32 brakes? i think the rears will be fine, but unsure about the front. my rear wheels sit pretty flush, my fronts could be more flush but i wanted to dial in the front camber/less negative to flush it so i dont want to run spacers... any info is greatly appreciated...

[projectRDM]

You need to specify wheel type and offset. A loose measurement doesn't do anybody any good.

[Xise]

r33 calipers actually use the same diameter rotor as the 01 Q45 if that helps...with 19" rims I imagine you will have plenty of clearance

just a bit of info:

01-97 Q45 front rotor 28mm x 296mm
z32 front rotor 26mm or 30mm x 280
r33 front rotor 30mm x 296mm

just gives you some options to choose from, the rears on z32/r32/r33 are the same...keep in mind the working ebrake assembly is very expensive..... these rotors/calipers fit under 16" rims and some 15" so with 19s you should be more than straight.

good luck choosing brakes!! fun yet expensive!!