SMM
02-06-2010, 04:48 PM
This turbo was made in late 2007 (probably wasnt sold until 2008 ). I am the second owner that has used this turbo.
It is a turbonetics t3/t4
.70 coldside with 4" inlet
.63 hotside with 2.5 outlet (5 bolt down pipe exhaust housing)
Stage 5 wheels (good a safe 500hp)
Polished compressor housing. Does have slight SURFACE crack (1/4 inch maybe) on housing due to previous owner over tightening the bolt. This crack DOES NOT go all the way through the housing and WILL NOT affect the performance of the turbo at all. I was honestly just going to get it welded over and sanded down to be perfect. This crack is barely, I mean barely noticeable, I am just very upfront about my parts.
Turbo has maybe 1mm (millimeter) shaft play side to side very very minimal, but every journal bearing does for oil clearance. It has NONE after it has been on the car and oil has been ran through it. NO back and forth shaft play what so ever. No smoke. No funny noises.
This turbo has NO bent or chipped blades no scarring on wheel walls either.
I can provide compressor maps for this turbo, aswell as part/serial numbers and I can take a detailed picture of all spec markings on the turbo.
Comes with oil drain fitting.
Turbo hits full boost around 3700 on a stock KA 19psi
Reason I am selling is because I am in the process of fully building a motor and this turbo will not flow enough air safely to make the horsepower I want on my next setup. Turbo works perfect though.
I am mainly looking for
5 lug wheels
Suspension arms s14
Coilovers
I will work with someone depending on what you have to offer whether I add some cash or you add some cash or more parts.
$500 cash OBO
http://i49.tinypic.com/5upkjd.jpg
http://i45.tinypic.com/2mxoo53.jpg
http://i49.tinypic.com/ww0j6d.jpg
It is a turbonetics t3/t4
.70 coldside with 4" inlet
.63 hotside with 2.5 outlet (5 bolt down pipe exhaust housing)
Stage 5 wheels (good a safe 500hp)
Polished compressor housing. Does have slight SURFACE crack (1/4 inch maybe) on housing due to previous owner over tightening the bolt. This crack DOES NOT go all the way through the housing and WILL NOT affect the performance of the turbo at all. I was honestly just going to get it welded over and sanded down to be perfect. This crack is barely, I mean barely noticeable, I am just very upfront about my parts.
Turbo has maybe 1mm (millimeter) shaft play side to side very very minimal, but every journal bearing does for oil clearance. It has NONE after it has been on the car and oil has been ran through it. NO back and forth shaft play what so ever. No smoke. No funny noises.
This turbo has NO bent or chipped blades no scarring on wheel walls either.
I can provide compressor maps for this turbo, aswell as part/serial numbers and I can take a detailed picture of all spec markings on the turbo.
Comes with oil drain fitting.
Turbo hits full boost around 3700 on a stock KA 19psi
Reason I am selling is because I am in the process of fully building a motor and this turbo will not flow enough air safely to make the horsepower I want on my next setup. Turbo works perfect though.
I am mainly looking for
5 lug wheels
Suspension arms s14
Coilovers
I will work with someone depending on what you have to offer whether I add some cash or you add some cash or more parts.
$500 cash OBO
http://i49.tinypic.com/5upkjd.jpg
http://i45.tinypic.com/2mxoo53.jpg
http://i49.tinypic.com/ww0j6d.jpg