PDA

View Full Version : CA S14 Manual Drive Shaft, Greddy Spec-LS Intercooler Kit, Matco TRC250 Torque Wrench

CinSun
02-06-2010, 01:02 PM
-All items located in Ontario, California 91761
-Willing to ship at BUYER'S expense, feel free to PM/email me for a quote

S14 Manual Drive Shaft (Non-ABS)

-$175 OBO
http://jdspence.smugmug.com/photos/759193128_CPYbG-M.jpg

Greddy SPEC-LS Intercooler Kit
-Brand new in box (box only opened to ensure there was no shipping damage, and all parts were included)
-comes with intercooler, piping, all related adapters/fittings, and installation instructions
-for S13 SR20DET
-made for S13 chassis, will fit in S14 chassis with minor modifications
-intercooler core dimensions are 600 x 280 x 76mm
-$OLD
http://jdspence.smugmug.com/photos/782239232_i8qEN-M.jpghttp://jdspence.smugmug.com/photos/782239458_wd4ST-M.jpghttp://jdspence.smugmug.com/photos/782239724_UoCWX-M.jpg
http://jdspence.smugmug.com/photos/783185111_piTJy-M.jpghttp://jdspence.smugmug.com/photos/783184774_oN8zW-M.jpghttp://jdspence.smugmug.com/photos/783185427_sBf2B-M.jpg

Matco TRC250 25-250 Ft-Lb Torque Wrench

-range of 25-250 ft-lbs
-great condition, ratchet functions smoothly
-comes with red blow molded case (no broken tabs)
-$OLD
http://jdspence.smugmug.com/photos/782240964_eQJxL-M.jpghttp://jdspence.smugmug.com/photos/782240232_A4f77-M.jpghttp://jdspence.smugmug.com/photos/782240003_dE5Tu-M.jpg
jevus
02-06-2010, 11:34 PM
Where's the intercooler picture. Can I see it. What are the dimentions
CinSun
02-07-2010, 01:42 PM
The intercooler is inside the cardboard box in the 3rd picture, i'll try getting pics up of the core and dimensions ASAP

torque wrench is sold
CinSun
02-08-2010, 01:22 PM
bump10char
CinSun
02-09-2010, 07:15 PM
bump

intercooler kit sold
CinSun
02-11-2010, 11:12 AM
bump10char
CinSun
02-12-2010, 12:32 PM
bump10char
keioffice
02-12-2010, 12:46 PM
Do you know if that drive shaft would work in a s14 with a redtop ive heard different things from different people but i think i need a s13 front and s14 rear drive shaft or a custom one
CinSun
02-12-2010, 01:51 PM
to be completely honest i'm not sure. I bought my S14 with an S13 SR20 blacktop and this was the drive shaft that came with it; I've had absolutely no problems with it. I'm assuming it'd be the same in your case but I can't be totally sure.
Mr. Phonso
02-12-2010, 02:15 PM
the driveshaft will work fine with any sr engine except s15, as long as it is in an s14 chassis with an s14 driveshaft. The only issues I could imagine you having is if the rear shaft doesnt match up with your diff, in which case you can just use the rear half of your auto one.
CinSun
02-13-2010, 04:17 PM
bump10char
CinSun
02-17-2010, 01:04 PM
bump10char
The_Thomas
02-17-2010, 01:57 PM
I'll offer 80+ shipping for the front half of the drive shaft...lmk thanks.
racerx2k1
02-17-2010, 02:25 PM
bump10char

bump

intercooler kit sold

bump10char

bump10char

bump10char

bump10char

2 bump limit. You can start new thread in 3 days.