240 Part Out(GREDDY/BC/GARRET/FUllRace/AEM)

[boett39]

Ive had my car posted for over a month now but am willilng to part out the car all the parts that are on andn installed on the car are listed below i will sell almost anything below and ship just about anywhere... any large items Motor/Trans will need to be shipped at your cost or i can drop off possibly...

170k miles on Chassis(clean underbody/straight/no accidents/Florida car/clear title)


Make an offer on the items below!



Koyo Rad----120$
Mishimoto Dual Electric Fans(brand new)100$

AEM EMS standalone (brand new)(1.2-1.6K RETAIL) ---1k lowest ill go

Trans/Driveline
Rebuilt 5spd s13 tran----offer
Momo Shift nob
Momo Pedals
17in Sportmax Rims Good cond (3.5 inch lip on rears 1-2 lip on fronts..no curb rash or dents)


Interior/Exterior

Autometer boost gauge molded into door---30$ includes the gauge and molded door piece

Autometer oil pressure/water temp/ A Pillar 3stck--30$ a gauges


Looking to keep the chassis as clean as i can along with the interior all whole for now so i can sell the rest of the car as a shell with no motor.. would like to keep the motor and trans together for now will be willing to tear down and sell block and head seperate if it comes to that

http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs043.snc1/4400_176189690474_645975474_6997021_2857041_n.jpg (http://www.240sxforums.com/forums/redirect-to/?redirect=http%3A%2F%2Fwww.facebook.com%2Fphoto.ph p%3Fpid%3D6997022%26id%3D645975474)


http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs043.snc1/4400_176189830474_645975474_6997042_2115252_n.jpg (http://www.240sxforums.com/forums/redirect-to/?redirect=http%3A%2F%2Fwww.facebook.com%2Fphoto.ph p%3Fpid%3D6997043%26id%3D645975474)

http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs043.snc1/4400_176189825474_645975474_6997041_2498005_n.jpg (http://www.240sxforums.com/forums/redirect-to/?redirect=http%3A%2F%2Fwww.facebook.com%2Fphoto.ph p%3Fpid%3D6997042%26id%3D645975474)

http://hphotos-snc1.fbcdn.net/hs043.snc1/4400_176189755474_645975474_6997029_6699668_n.jpg (http://www.240sxforums.com/forums/redirect-to/?redirect=http%3A%2F%2Fwww.facebook.com%2Fphoto.ph p%3Fpid%3D6997030%26id%3D645975474)


contact me by email or by phone/text

Email: [email protected]
Phone: 262-689-4686

[JK2005]

where are you located?

[slideways90]

how much for shifter sent to 28213?

[RB24_S14]

You been Pmed

[smbonn2005]

How much for the AEM EMS and the LSD? PM me with prices for each. Thanks

[kpc_0721]

How much for injectors, rail, tial BOV and greddy IC with pipes?

[ETHANOLED SR]

hey bro, I text you about the turbo setup today. Get back to me asap. thanks!

[playastarkz123]

pics of the interior (molded boost gauge in door?) just curious

[RJs9DsixS14]

Im interested in the wing and interior stuff. PM

[AWDJosh]

interested in body kit complete(frtbmpr,sideskrt,rearbumper valance, wing)

[Nvincibleleester]

shift boot plastic trims + shift boot
any broken tabs?

[ETHANOLED SR]

bump for you, quality parts @ great prices! :hsdance:

[boett39]

pics of the interior (molded boost gauge in door?) just curious
http://hphotos-snc1.fbcdn.net/hs003.snc1/4400_176189855474_645975474_6997045_947902_n.jpg (http://www.facebook.com/photo.php?pid=6997046&id=645975474)

thats a close up but it pops right into where your ac vent is i think its pretty kick ass spot to put it myself

[boett39]

How much for injectors, rail, tial BOV and greddy IC with pipes?
PMed intercooler is sold already

[boett39]

shift boot plastic trims + shift boot
any broken tabs?


all tabs are intact and book pops right into place for now im looking to keep the interior of the car intact selling car as a shell with no engine but wanted to keep the interior more appealing to a buyer

[1_Bad_Silvia]

How much are you asking for the greddy intake manifold??? really interested and possibly the fuel rail...write me back...thanks

[boett39]

How much are you asking for the greddy intake manifold??? really interested and possibly the fuel rail...write me back...thanks

fuel rail with the SS braided lines are pending sale

PM sent

[Chuvy]

how much for nismo oil cap?

[BILLFISHER21]

price and condition of clutch?

[MeowMR2]

how much for the GT3071R

[JDM Sil4ty]

price for the bm short shifter shipped to 95757..

[MadboostSX]

Please PM me price on entire setup minus the interior/exterior portion. Motivated buyer.

[s15specR]

PM price and pics on Tial 50mm BOV (11-12 spring)

[Ceepo]

Have that carbonfiber coilpack cover? how much shipped to 84720?

Also what guage series do you have, im interested int he oil pressure and water temp?

[slideways90]

im interested in the shifter. you have been pmed.

[ILL S13]

$30 shipped for the water temp gauge lmk

[GreekPower]

how much for the tial bov and wastegate to 16046? pics of both please. email me a reply at [email protected] or PM me

[Jordan249]

Says rebuilt tranny. With oem parts? Is the only aftermarket part the clutch? pm me details por favor.

[nismo240sxdrifter]

how much for the chassis? does it have a clean title?

[dookiedang]

how much for the chassis? does it have a clean title?


^^^^^
same question.
i commute from rockford to beloit everyday. where exactly are you located at? and how much for the chassis? lmk soon thanks. PM'd.

[florante rea]

got more pics of the turbo? i'm highly interested.

[RD_240]

Please check your messages

[BenArtM80]

sent him $60 for the FPR and haven't gotten a reply since payment was sent....anyone else?

[burninskulls0911]

pm me with a price on the fpr

[BenArtM80]

^ read the post above yours

[monaS14.5]

Mishimoto electric fams, PM m priceshipped to 10465

[monaS14.5]

............fans*

[jc636]

need to put prices in your ad

[TurboSE]

can I get a pic of the Autometer gauges? email it to [email protected] if possible...

[boett39]

sorry everyone for takin so long i worked almost every day this week 12 hour shifts most everyone who pmed me i got back to tonight

i dont put any prices in my add cuz its all OBO you make me an offer and we will talk from there

the trans was rebuild with all OEM parts

as for any parts and pricing just Pm me and ill get back to you asap like i said busy busy

FPR shippt sent Pm

thank you all
benn

just Pm or text me 262-689-4686

[TurboSE]

sorry man, I thought all the gauges were Ultra-Lite, good luck with the sale!

[lavolanta]

power steering pump ship to 89122?

[kickertu]

so i had been texting him for 2 days. we finally reached a deal on all the parts. i was at dinner. was going to head home and paypal him, then he decided to sell the parts to someone else.

if you guys are dealing with him, make sure you pay as SOON as you make a deal.

[jace_xiong]

New Camber arms
News inner and outer tie rods

New, what brand? thanks.

[BenArtM80]

FPR arrived today, in great shape and for a great price, thanks

[HONDA_EAT'R]

Im interested in rad and fans could you pm!

[confuzed240]

So he just sold me a fake greddy manifold fyi. He said he is going to give me a refund. I will post again to clear his name when I get the money back, we will see if he is respectable or not.

[kouki3015]

I got the stuff I bought from him rather quickly. Great guy, responds to my messages in a timely manner. I would buy from him again

[reccakun08]

Condition of the turbo fins/shaftplay? parting out the turbo kit? let me know shipped to 20853.

[Flicktitty]

Email sent about the rolling chassis.

[boett39]

Everything has now been sold buyer just called me and picked up the chasis and anything i had left.. Btw i did refund the guy for the intake mani as well to clear anything up.. All that is left is the aem ems brand new still has box