ZeekS14
01-26-2010, 03:14 PM
I have for sale my S14 race car. its been tracked a few times to test but have not had any time to tune and set up.
Looking to sell as quickly as possible. i have it listed on ebay for $12,000 but will consider any reasonable offers/trades+cash.
Lots of mods:
Aim Sports Pista digital dash
Zeitronix AF meter
Greddy Profec B boost controller
Apexi AFC
TEIN FLEX coil-overs
GT2871R turbo
KAAZ 2 way LSD
RECARO SPG bucket seats
Sabelt 5 pt FIA harness
koyo radiator
meizier electric water pump and block off plate
custom GT Fabrications coolant tank
GT Fabrications V-mount intercooler
AP Racing 4 piston calipers (front)
Brembo 2 piston (rear)
Performance Friction brake pads
GT Fabrications full 10pt cage (TIG welded)
reinforced front shock towers
GT Fabrications 3 pt strut tower bar with master cylinder stopper
Custom intake pipe
all aluminum IC pipes w/ silicone hoses
oil cooler
power steering cooler
modified steering column with steering quickener (1.75 turns lock-to-lock)
aluminum drive shaft
diff cooler cover
Greddy clone aluminum oil pan
5 Zigen GN+ 18in wheels
most parts are practically new.
stock harness has been replaced with a custom one to reduce weight and reduce any down time for trouble shooting. standard harness plug has been replaced with a MIL SPEC connector.
similar to: http://ralphselectronics.biz/images/...3107A2220P.jpg
I TIG welded the cage, intercooler and most of the custom parts myself.
front core support has been removed and replaced with a custom made tubular bumper. it is bolt on so it can be removed right away and give easy access to the engine.
The engine can be pulled in 30 mins or less for maintenance/repairs.
I also have parts that were going to be installed but never got around to.
JE pistons (ceramic coated head with anodized skirts)
eagle H-Beam rods
ARP head and main studs
HKS cams
There are a lot of parts and work done on this car. I'm sure that i might have missed a few things here and there.
if you have any questions let me know.
THANKS!!!
Looking to sell as quickly as possible. i have it listed on ebay for $12,000 but will consider any reasonable offers/trades+cash.
Lots of mods:
Aim Sports Pista digital dash
Zeitronix AF meter
Greddy Profec B boost controller
Apexi AFC
TEIN FLEX coil-overs
GT2871R turbo
KAAZ 2 way LSD
RECARO SPG bucket seats
Sabelt 5 pt FIA harness
koyo radiator
meizier electric water pump and block off plate
custom GT Fabrications coolant tank
GT Fabrications V-mount intercooler
AP Racing 4 piston calipers (front)
Brembo 2 piston (rear)
Performance Friction brake pads
GT Fabrications full 10pt cage (TIG welded)
reinforced front shock towers
GT Fabrications 3 pt strut tower bar with master cylinder stopper
Custom intake pipe
all aluminum IC pipes w/ silicone hoses
oil cooler
power steering cooler
modified steering column with steering quickener (1.75 turns lock-to-lock)
aluminum drive shaft
diff cooler cover
Greddy clone aluminum oil pan
5 Zigen GN+ 18in wheels
most parts are practically new.
stock harness has been replaced with a custom one to reduce weight and reduce any down time for trouble shooting. standard harness plug has been replaced with a MIL SPEC connector.
similar to: http://ralphselectronics.biz/images/...3107A2220P.jpg
I TIG welded the cage, intercooler and most of the custom parts myself.
front core support has been removed and replaced with a custom made tubular bumper. it is bolt on so it can be removed right away and give easy access to the engine.
The engine can be pulled in 30 mins or less for maintenance/repairs.
I also have parts that were going to be installed but never got around to.
JE pistons (ceramic coated head with anodized skirts)
eagle H-Beam rods
ARP head and main studs
HKS cams
There are a lot of parts and work done on this car. I'm sure that i might have missed a few things here and there.
if you have any questions let me know.
THANKS!!!