1989 240sx - SR20/ Cage / Kit / Suspension... More Pics

[CO240]

I hate to do it... but its gotta happen... That being said, the car runs and drive just fine. The interior has been taken out ( I have MOST of the interior if the buyer wants it). The top of the car is unpainted but already ready to spray. I decided to leave it up to the buyer whether to paint it green as the rest of the car or go with black ( I will throw in the rest of the green paint and clear coat I have, which is a bit less than half a gallon ). I also have a 180sx Type X Kouki wing that will come with the car if the buyer wants it which is already painted.

Oil was changed often. It was only driven a few times a month for the last 2 or 3 years.

The only problems are that the headlight motors, windshield wipers and speedometer dont work. The passenger side rear upper control arm could use a new heim joint ( cheap fix ). The car had wiring work done and new wires have to be run for these to work again.

Could use a new front bumper, but again, paint is included so that should help.

I have documents for nearly everything on the car... some people dig having that kinda stuff i guess


***If the buyer is interested I have parts for the motor that I can throw in for a bit more $$$, which include...

Garrett GT3071r-wg Turbo (Brand New)
BC 264/264 Cams (Brand New)
JGY Top Feed Fuel Rail ( Brand New )
MAP ECU ( Brand New )
Precision Top Feed 72lb Injectors( about 5k miles used ) w/new sr20 pigtails
Circuit Sports Turbo Lines ( Brand New )
12' Electric Fan ( Brand New )
Oil Catch Can ( Brand New )***


Motor:
SR20DET
10psi Actuator
Front Mount Intercooler
HKS intake
Synchronic BOV
Greddy Rocker Arm Stoppers
Greddy Oil Pan
Odyssey Battery
Apex Exhaust

Interior:
Momo Bucket
Simpson 5pt Latch&Link Harness (Driver)
Sparco 4pt Harness ( Passenger )
Cheap Boost and Oil Pres. Gauges ( water temp there but not hooked up )
NRG Steering Wheel
NRG Quick release
Momo Steering hub

Suspension:
Stance Coilovers
Suspension Techniques Sway Bars
SPL Tension Rods
SPL Traction Rods
SPL Toe Rods
ProjectSilvia Rear Upper Control Arms
RSR Bushing Set
Tein Tie Rods/Ends
Delrin Solid Subframe Bushings

Chassis:
MAC Autosport custom 8pt Roll Cage
Ultra Racing Fender Braces

Wheels/Brakes/Drivetrain:
ACT Street Clutch
Tomei 2 Way LSD
Z32 TT 5 Lug Swap w/Front and Rear Calipers
SPL Steel Braided Brake Line
Hawk HPS Pads
MB Battles 17x9.5 +15


Body:
Chaser Aero Kit
British Racing Green
180sx Type X Tail Lights
180sx Type X Wing

Asking $7,000

No Trades..No Lowballs


http://i389.photobucket.com/albums/oo334/DriftedSR/l_f628f9da5acf45bd978b6cb75b03e066.jpg

http://i389.photobucket.com/albums/oo334/DriftedSR/l_33bfaceb9d124bfbb01e882c90c9f4-1.jpg

http://i389.photobucket.com/albums/oo334/DriftedSR/l_047db515a37241e8b855d2d4cea4e2-1.jpg

http://i389.photobucket.com/albums/oo334/DriftedSR/l_0e80a51e0e924c4186041d49a35487b3.jpg

http://i389.photobucket.com/albums/oo334/DriftedSR/l_094584f70d514735b6314ba837e3ac-1.jpg

http://i389.photobucket.com/albums/oo334/DriftedSR/100_1089.jpg

http://i389.photobucket.com/albums/oo334/DriftedSR/100_1091.jpg

http://i389.photobucket.com/albums/oo334/DriftedSR/100_1093.jpg


More exterior pics here... http://www.flickr.com/photos/s...95425 (http://www.flickr.com/photos/susan-lawson/4164379667/in/set-72157622826395425)/


Located near Denver, CO

[spartanmisfit]

Nice car and even better price. Glws

[CO240]

Nice car and even better price. Glws

Thanks... apparently I'm going to need it.

[blue rexsti]

GLWS, you know the power you are putting out?

[CO240]

GLWS, you know the power you are putting out?

It dyno'd at 241whp a few years ago, and I've only added a FMIC. But I haven't been on the dyno since then.


BUT..With all of the extra parts it shouldn't have a problem putting down well over 400whp.

[CO240]

No Takers??

[spartanmisfit]

Too bad your not down with the trades!!

[CO240]

If I didnt need the money so badly, I would be.

[Hawiann22]

IS that john deere green? :D
Whats up with the front clip? looks like bent the hood

[CO240]

IS that john deere green? :D
Whats up with the front clip? looks like bent the hood


Its not the best fitting kit in the world... So, the bumper and fenders are a bit off. Its not TOOO bad. It was never meant to be a show car.


I have a few people interested. Nothing solid yet. PM or respond if you are interested.

[CO240]

PMs have been replied!!

[CO240]

*Beating dead horse*

[racerx2k1]

Thanks... apparently I'm going to need it.

No Takers??

PMs have been replied!!

*Beating dead horse*

2 bump limit. You can start new thread in 3 days.