PDA

View Full Version : Shifter Bushing need help


najdmbb2
01-24-2010, 06:54 PM
ok well im relatively new to 240s. i just picked up a 89 240sx with a rb25 swap. the guy i picked it up from had put the neo rb25 swap in with the rb25 tranny but put a ka shifter and i need to replace the shifter bushing cause it is very bad. so to replace the shifter bushing do i just get a rb25 shifter bushing, ka shifter bushing, or would any 240sx shifter bushing work

projectRDM
01-24-2010, 07:06 PM
If it has a KA shifter in it, common sense dictates you need the bushing for the KA shifter. However, a few versions of the RB25 transmissions do not use the same type of shifter as the KA/SR/CA/VG30/RB20.

Verify that first.

najdmbb2
01-24-2010, 07:13 PM
thanks i did think ka shifter bushing, i was just trying to make sure before i buy the wrong part. it has the neo rb25 tranny