PDA

View Full Version : Manual to power windows. Need some extra help.


waxball88
01-24-2010, 12:09 PM
I have a 93 se parts car and a 93 base. I have the harness in and under the dash of my base there is no second plug for the blue plug. Is it hidden somewhere or is it just not there?

ReLiC
01-24-2010, 12:18 PM
It's most likely not there. What you can do is grab your own wires and pass them over to each side. But since you have a parts car, remove the dash and use that original harness, that way you won't get confused. It's only like 3 wires that go from the pass. to driver side.

Btw when i did mine, i got enough info searching on here.

waxball88
01-24-2010, 12:49 PM
Whats the lesser of 2 evils. Run my own wires...or switch dash harnesses.

ReLiC
01-24-2010, 12:56 PM
Well, i just grabbed the harness because i didn't have extra wires. I say if you have it, might as well use it.
You don't need the entire dash harness. Cut out the ones you don't need to be able to separate it from the rest. I think you just need the two red wires, and black. I'm not sure tho.. i would need to see it, but i don't have my s13 anymore..

waxball88
01-24-2010, 01:03 PM
Alright well if anyone else can help me out..please do.

I'm doing the entire swap to electric though. Is there a way to chop off the plug i need and splice it in to my base harness. There are quite a few wires. There are the windows, mirrors, and door lock actuators. The reason for the swap is i'm going to be installing an alarm and want all the features.

projectRDM
01-24-2010, 05:13 PM
There's tons of threads already on this subject, some I've replied to. Plus with an FSM for any model S13 you can easily view the required schematics and figure it out.