PDA

View Full Version : T28 turbine on a T3 turbo?


THEminusMAN
01-23-2010, 04:32 PM
Im wanting to ditch my failed BB T28 in favor of a good journal bearing turbo, I want to stay Garrett, is there a T3 Garrett that I can buy and swap turbines on so I can stay bottom mount/ be journal, and still have 300+ hp flow? Don't light me up, i searched and couldn't find any posts on this topic.....Thanks for any input

fliprayzin240sx
01-23-2010, 06:40 PM
So you want a journal bearing T2 flanged garrett turbo?

Garrett T series - Journal Bearing : atpturbo.com (http://www.atpturbo.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=tp&Category_Code=TBN)

The only thing I can see that seems close to what you want is the "GT28 journal bearing turbo with actuator .86 ar" on the bottom right of the page.

THEminusMAN
01-23-2010, 07:07 PM
Thanks, that is an option, i was hoping to drop 600 on a t3 journal and bolt up the turbine housing from my t28,... i dont know if thats even possible.. thanks again.

SuicidnS13
01-23-2010, 09:31 PM
Or just big a BIG28 from Forced Performance. Its a t3 compressor in a t25 which flows like 40lbs per minute. Great turbo and it will flow over 350whp with no issues. Also is built from a blown t25 for like 700.00 bucks.

S13 curtis
01-24-2010, 12:51 AM
Or just big a BIG28 from Forced Performance. Its a t3 compressor in a t25 which flows like 40lbs per minute. Great turbo and it will flow over 350whp with no issues. Also is built from a blown t25 for like 700.00 bucks.

there is one of those forsale on here for about $350 bucks

SuicidnS13
01-24-2010, 08:30 AM
There you go bro. Plus rebuilds on them are very cheap.