FS:S13 SR20DET parts lot

[sr20doc]

I have a ton of SR stuff I am looking to sell. I have 3 Blocks, 3 Heads, 3 Cranks (2 are in good shape and one needs reground), oil pans, oil pumps, 1 set of Greddy rocker stoppers, stock rods and pistons, stock cams, and misc. internal parts. One of the blocks is still assembled as a short block but has a craqcked #4 ring land. All items are in good shape but will require rebuilds. I would like to get $1000 obo for all of it but will consider trades for RB25 related items and will seperate.
Thanks,
George
http://i5.photobucket.com/albums/y180/gfwalker/100_4592.jpg
http://i5.photobucket.com/albums/y180/gfwalker/100_4591.jpg
http://i5.photobucket.com/albums/y180/gfwalker/100_4590.jpg
http://i5.photobucket.com/albums/y180/gfwalker/100_4589.jpg
http://i5.photobucket.com/albums/y180/gfwalker/100_4588.jpg
http://i5.photobucket.com/albums/y180/gfwalker/100_4593.jpg

[moses]

How much would you sell a crank pulley for?

[sr20doc]

How much would you sell a crank pulley for?

$50 shipped

[shift_jin]

how much for the a head and the short block picked up?

[sr20doc]

how much for the a head and the short block picked up?

Everything for a complete long block including intake $500 obo
Thanks
George

[sr20doc]

whole lot shipped cont. 48 states $950.00

[XnTroubleX]

I am interested in 1 bare block and 1 bare head, how much shipped to BFE? 71060

[traxx07]

how much for the Greddy RAS?

[bshotts]

Hmmm....cracked #4 ringland sounds very familiar. Hey I know that block! haha Good luck with your garage clean out George. Heard about your new project on Indycarz not too long ago...coming along alright. Thanks for getting the SR20 running so dependably again!

[sr20doc]

I would like to sell the whole lot as a set if it does not sell this week I will part it all out.
This week ony $750 for everything!!!

[sr20doc]

Need the money!! come get it $600 for everything

[SR20DETsilvia]

Do you have a sr non hicas power steering pump?

[sr20doc]

Do you have a sr non hicas power steering pump?

Sorry I do not have one.

[jdms240sx]

how much for a long block sent to 85035? thx

[sr20doc]

Alright since I have had a lot of requests for odds and ends here it goes:
Greddy RAS $60 shipped
Complete short block as pictured $350 shipped
Complete bare block with upper oil pan, lower oil pan, and main caps $225 shipped
Good crank $175 shipped
Bare head $225 shipped
Complete head $300 shipped
Crank pulley $65 shipped
Stock intake manifold $65 shipped
CAS $90 shipped
4 Coil packs and harness $100 shipped

Will combine shipping for multiple items

[sr20doc]

how much for a long block sent to 85035? thx

$550 shipped

[jdms240sx]

$550 shipped
what is excatly included sorry for stupid questions :newbie: lol

[sr20doc]

what is excatly included sorry for stupid questions :newbie: lol

Not a problem!
Includes:
Complete short block as pictured (block, crank, pistons, rods, oil filter housing, upper and lower oil pan, knock sensor, balancer, water pump, oil pump, timing chan and tensioner)
Complete head as pictured (cyl head, lifters, valves, springs, rockers,red top valve cover, stock cams and sprockets)
CAS, coil packs and harness,stock intake

Let me know if you have any other questions, or need anything else with it.
Thanks
George

[jdms240sx]

Not a problem!
Includes:
Complete short block as pictured (block, crank, pistons, rods, oil filter housing, upper and lower oil pan, knock sensor, balancer, water pump, oil pump, timing chan and tensioner)
Complete head as pictured (cyl head, lifters, valves, springs, rockers,red top valve cover, stock cams and sprockets)
CAS, coil packs and harness,stock intake

Let me know if you have any other questions, or need anything else with it.
Thanks
George
so is that the one with the cracked ring land?

[sr20doc]

Yes it is, but I will send a good stock piston with it as well.
Thanks
George

[samarirolle7]

i would love to buy one of the long blocks from you, i only have 100 right now so i have to wait til i get my taxes back unfortunately :( if you still have one for sale at that time, which prolly wont happen but i guess time will tell. good luck with selling everything, you got some good deals going on :)

[SpectreZ91]

How much for an SR Oil Pump shipped to 92504?

[s14_rob]

complete head picked up? need one for my short block asap probably could pick this weekend

[tacoboy]

How much for a #1 stamped piston?