kpc_0721
01-22-2010, 01:31 PM
NAME: Kyle C.
PHONE NUMBER: 815-997-2265
EMAIL: [email protected]
LOCATION: Rockford,IL
PAYMENT PREFERENCE: Cash, paypal or trades
------------------------------------------------------------------
ITEM:
PRICE:
SHIPPING: smaller stuff only
DESCRIPTION: Look Down
Will post pics later after work.
Will trade for:
s13 sr aftermarket parts
Sr aftermarket clutch
sr aftermarket intake manifold
greddy or any decent Intercooler
s13 SR ECU
s13 SR CAS
S13 hatchback shell
HKS Valve Springs SR20det NEW- $180
Supertech ti dual springs & retainers KA24DE- $160
Avid Solid motor mounts KA/SR- $100
S13 KA Koyo radiator- $200
KA24DE DC Header- $100
Holset HX30W Turbo BRAND NEW- $400
Dont know to much about holsets but turbo is around the size of a gt28, internally gated, capable of making high 300's to 400hp.
Autometer Cobalt gauges- $50 each
mechanical water temp/oil pressure. oil line comes with fitting to thread directly into stock oil sensor location. New condition.
KA24DE Motor/5speed trans with ACT Street/Strip clutch & pressure plate- $600
Motor is still in the car running so buyers can come check it out and see that it runs good with no problems. Only put maybe 700 miles since I dropped it in my car so still has a fresh filter on it. Reason for selling is I bought a SR yesterday so no need for this anymore.
Trans also shifts like butter, no grinds from it.
Buddy went to N.C to pick up a s13, drove it 1000 Miles back to rockford with absolutely 0 problems and few days later pulled the motor for him so he could do a SR swap.
guy he bought the car from said the timing chain, headgasket, valve seals, valve guids and possibly
the valves themselves were replaced around 80,000 miles. Can't really say all of it is for sure, but the head was immaculate when we pulled it from his car so seems like there has been work done.
Pulled the stock clutch and put in my ACT street Clutch & Pressure plate so will come with that as well, clutch has been in a few of my motors and has around 8000 miles on it, still grabs great thoughWork
Miester S2R- $900
18x9 +15 with 225/40 tires all around.
Fronts are Falken Azenis st115 up front with around 75-80%
Rears are Sumitomo's with around 65-70% left.
2 wheels powdercoat is chipping, one wheel has some rash from rubbing on coilover, doesn't efffect anything and isn't even noticble when on the car.
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/CIMG1927.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/CIMG2324.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/CIMG2322.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/020.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/023.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/022.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/019.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/CIMG2196.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/CIMG2337.jpg
PHONE NUMBER: 815-997-2265
EMAIL: [email protected]
LOCATION: Rockford,IL
PAYMENT PREFERENCE: Cash, paypal or trades
------------------------------------------------------------------
ITEM:
PRICE:
SHIPPING: smaller stuff only
DESCRIPTION: Look Down
Will post pics later after work.
Will trade for:
s13 sr aftermarket parts
Sr aftermarket clutch
sr aftermarket intake manifold
greddy or any decent Intercooler
s13 SR ECU
s13 SR CAS
S13 hatchback shell
HKS Valve Springs SR20det NEW- $180
Supertech ti dual springs & retainers KA24DE- $160
Avid Solid motor mounts KA/SR- $100
S13 KA Koyo radiator- $200
KA24DE DC Header- $100
Holset HX30W Turbo BRAND NEW- $400
Dont know to much about holsets but turbo is around the size of a gt28, internally gated, capable of making high 300's to 400hp.
Autometer Cobalt gauges- $50 each
mechanical water temp/oil pressure. oil line comes with fitting to thread directly into stock oil sensor location. New condition.
KA24DE Motor/5speed trans with ACT Street/Strip clutch & pressure plate- $600
Motor is still in the car running so buyers can come check it out and see that it runs good with no problems. Only put maybe 700 miles since I dropped it in my car so still has a fresh filter on it. Reason for selling is I bought a SR yesterday so no need for this anymore.
Trans also shifts like butter, no grinds from it.
Buddy went to N.C to pick up a s13, drove it 1000 Miles back to rockford with absolutely 0 problems and few days later pulled the motor for him so he could do a SR swap.
guy he bought the car from said the timing chain, headgasket, valve seals, valve guids and possibly
the valves themselves were replaced around 80,000 miles. Can't really say all of it is for sure, but the head was immaculate when we pulled it from his car so seems like there has been work done.
Pulled the stock clutch and put in my ACT street Clutch & Pressure plate so will come with that as well, clutch has been in a few of my motors and has around 8000 miles on it, still grabs great thoughWork
Miester S2R- $900
18x9 +15 with 225/40 tires all around.
Fronts are Falken Azenis st115 up front with around 75-80%
Rears are Sumitomo's with around 65-70% left.
2 wheels powdercoat is chipping, one wheel has some rash from rubbing on coilover, doesn't efffect anything and isn't even noticble when on the car.
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/CIMG1927.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/CIMG2324.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/CIMG2322.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/020.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/023.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/022.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/019.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/CIMG2196.jpg
http://i166.photobucket.com/albums/u81/kpc_0721/Car%20stuff/CIMG2337.jpg