View Full Version : need lots of sr parts!!!!
ROOSEY
01-16-2010, 08:06 AM
all of these items i need lemme know if you wanna sell them also i have stuff i can trade you like some enkei rims,knockoff sparco pro2000 seat, sohc header, nice grey s13 rear seats.
heres the list!!
1. stock bore head gasket prefer heavy duty stuff(check)
2. compressor turbo elbow to downpipe, Screamer pipe :)
3. sr tranny complete or without clutch/pressure/flywheel(good condition)(check)
4. clutch/pressure plate (not stock)(check)
5. stock or aftermarket flywheel(check)
6. intercooler setup (s13)(check) need stock piping for smic though.
7. aftermarket turbo manifold(check)
8. power steering pump(check)
9. sr redtop ecu
10. aftermarket downpipe
11. alternator and bracket(check)
12. motor mount brackets (check)
13. good condition motor mounts(check)
14. boost gauge
15. coil packs(check)
16. DOHC power steering
17. DOHC guage cluster.
18. Cam angle sensor
19. water temp outlet pipe thingy?
20. SR20DET belts
ill update if i find anything else im in need of
PM ME!!
Tranman324
01-16-2010, 08:22 AM
I have the stock elbow. Pm me
i have a t3 turbo manifold if you are interested and a f1 racing stage 3 clutch (brand new).
lmk if you are interested
thanks
DataXUnknown
01-16-2010, 09:47 AM
I have a stock elbow, an XS Engineering front mount intercooler, and all 4 coilpacks.
Unfortunetly I do not have any piping for the intercooler. I have the coilpack harness as well if your in need of that.
PM me if your interested.
traxx07
01-16-2010, 10:39 AM
Got the stock elbow and Greddy downpipe. PM me if interested and Ill send you some pics so you can throw an offer.
fcdrifter20
01-16-2010, 10:50 AM
i got tranny and flywheel
skylindrftr
01-16-2010, 11:29 AM
-T-Pros Exhaust Manifold, just pulled it off my SR, workign condition! $50 + your preferred shipping. I am OPEN to trades.
http://i5.photobucket.com/albums/y159/jdm240/DSCN3110.jpg
SRdSil8T
01-16-2010, 12:30 PM
I have the coilpacks ready to shoot out LMK
http://zilvia.net/f/sale-items/296685-fs-some-stock-sr-stuff-needs-go-make-offers.html
Jdm_of_miami
01-18-2010, 09:10 PM
heres the list!!
1. stock bore head gasket prefer heavy duty stuff comettic $90.00
2. compressor turbo elbow $20.00
3. sr tranny complete or without clutch/pressure/flywheel(good condition) $175.00
4. stock flywheel $45.00
5. power steering pump $125.00
9. sr ecu $150.00
10. alternator bracket $30.00
11. motor mount brackets $30.00 (each)
13. good condition motor mounts $30.00 (for both)
14. coil packs $100.00 with the coil harness
nismos13silvia
01-18-2010, 10:07 PM
You got pm for flywheel.
thagr81 us
01-19-2010, 06:35 AM
I have a SPEC Stage 3 Clutch and Fidanza Flywheel combo if you are interested. <10K on both... PM me if you are interested.
ride 4 lame
01-19-2010, 08:41 AM
i have an exedy hyper single. BRAND NEW disk with used flywheel.
pm me an offer. Its still attached to the motor in the car...so no pics yet
90hatchie
01-19-2010, 08:52 AM
i got a stock oem nissan head gasket never used
30 bucks and its urs
s13silvia123
01-19-2010, 11:38 AM
got a ACT clutch pressure plate all you have to do is buy the clutch and youre good to go
let me know "cheaper than buying a brand new set"
Rittmeister
01-26-2010, 01:30 PM
PM'd on several items.
redline240sx
01-26-2010, 03:14 PM
I have a stock flywheel, PM if interested
I have a universal Turbo Gauge offer price $110, and the meter diameter is 60mm.
If you have interest, please let me know.
Thanks
sidedrifts13
01-26-2010, 03:44 PM
i have motor mount brackets and power steering bracket pm me
smellslikecurry
01-26-2010, 07:47 PM
3. sr tranny complete or without clutch/pressure/flywheel(good condition)
4. clutch/pressure plate (not stock)
5. stock or aftermarket flywheel
14. boost gauge
i have an s13 blacktop tranny with act clutch and fidanza flywheel installed
or
brand new act streetlite flywheel
and a
used stri boost gauge
ROOSEY
02-04-2010, 02:39 PM
UPDATE still need the following:
ps pump
downpipe
boost gauge
coil packs
water neck
downpipe
intercooler and piping
motor mounts
SRdSil8T
02-04-2010, 03:22 PM
UPDATE still need the following:
ps pump
downpipe
boost gauge
coil packs
water neck
downpipe
intercooler and piping
motor mounts
I still have the coilpacks ready to ship, LMK
EDIT, Also have the stock SR flywheel that can be resurfaced
http://zilvia.net/f/sale-items/303977-fs-some-stock-sr-stuff-hids-tires-all-needs-go-make-offers.html
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.