Rb26dett turbo on sr

[kikcaffine]

So Im getting a stellar deal on a new turbo for my SR car. Its coming off of a 2002 rb26dett. I was told I only need a different turbo intake thing to make it work on my car. Its the t28 so it should bolt in I assume? I have an aftermarket cooling line and oil feed and return lines. So I need a different clocking plate thing? Have a 3in turbo back exhaust and 550's and 255lph walboro. Im hoping for about 280-300whp. Im currently at 215whp @ 10psi on the stock t25. The car is just a weekend warrior so its not a huge deal if its down or w/e

[nsany(atl)]

well they quit selling the RB motors in 1999. It's too small for a SR

[97240TB]

lol Loving the use of the word "Thing." to reference specific parts.

[S13 curtis]

it should be fine. any thing is better than the stock T25.

the RB T28 should be able to meet your goal.

[ExZaCc]

the s14 t28 is suppose to be a good upgrade for stock gtr turbos.. i guess its alittle better response.. not completely sure, i saw an article about an r34 getting the turbos swapped for twin s14 turbos. but didnt read it all..

[nsany(atl)]

the RB turbo is 1/2 the size of the SR T25. You will have extremly high EGT's if you run that.

[bl3ujay07]

I thought rb's uses the t3 flange?

[kikcaffine]

rb26's use a t2 flange and are dual ball bearing. gt2860r.

[bl3ujay07]

^^^Damn, if i would have known, i would have picked up a local's twin for $100 a while back.

[kikcaffine]

Is that then smaller than a regular t28? So with this i'd get the power of the t28 with the quick spool of the t25?

[HYPNOTIK]

well they quit selling the RB motors in 1999.

Where'd you come up with that?

[nsany(atl)]

Where'd you come up with that?

yah, that was wrong, was thinking VGTT

[RYAN_S-14]

its a t28 but smaller then a stock S-14, or S-15 T-28, an upgrade to the stock S-13 T-25 but not to a S-14 or a S-15 turbo.

don't know exact size

[Ktown_drifter]

yea GTR turbos are tiny.. imilar to CA18 in size... if you wat an upgrade go with a S15 T28 or one off a GTIR