Alignment specs?!!

[VG30Drift]

Hey guys, recently I went in for an alignment and it dawned on me that outside of Forza 3, I have no idea what alignment specs people are running on their 240s.

So: after doing some research, I still don't have a clue because most people don't post their actual specs in degrees and numbers.

If you would, post your camber, caster, toe etc along with whether the car is set up for drift or grip and s13/s14!

Factory specs are as follows for S13:

Front:

Camber: -1.5 - 0.0
Caster: 6.0 - 7.5
Toe: .02 - .11
SAI (Steering axis inclination): 12.5 - 14.0
IA (Included angle) 11.0 - 14.0

Rear:

Camber: (-1.6) - (-0.6)
Toe: .03 - .21

So, what are your tried and proven specs!?

[LayNLow]

I usually run 2.5* camber up front, 1.5 in the back and 0 toe all around. I was running like 7.5* castor, but im using stock tension arms on my new hatch so they are both at 6* I think. Works ok for me for drifting.

[Carbomb]

front
camber -3.5 At least (with drift knuckles)
toe 0
caster 8
rear
camber -.5
toe 0
shorten the traction arm 10mm from factory. {the shorter of all arms in rear}
these specs came from a Formula D driver and they are really nice on my s13.
they are a lil older and Im sure the specs for this person set up has changed A ton but they work GREAT!
also for drifting add some air in rear tires. I run about 55 psi in oem wheels or I did...

[s13silvia123]

drifting

front

camber: -3.5
toe: 0
caster: 6

rear

camber: -5
toe: 0