PDA

View Full Version : tranny wires?


Driftin_240sx
06-02-2003, 02:38 PM
ok i need your help , i am trying to figure out what the wires comming out of the tranny are for, i am spacificly looking for the 3rd on back, starting at the block going backwards, i belive there are 4 accuall plugs its not the big black plug, they are just some kind of sensor but i dont know what it is.....
what does that sensor do?

david

scandalcat1
06-02-2003, 08:32 PM
Crank shaft position sensor...

Driftin_240sx
06-02-2003, 09:49 PM
what does it read? speed? revs?

david

onepuff
01-28-2007, 12:23 AM
crank position sensor is on top of the bellhousing. what kind of transmission do u have? this pic is for a s13 trans. it doesn't have a crank position sensor only s14 does

http://farm1.static.flickr.com/173/369691207_f6b1d1f3d7_o.png

grnappletree14
01-28-2007, 04:26 PM
does any one know what sensor r on the s13 sr20det tranny, is it the same as the pic above

projectRDM
01-28-2007, 06:26 PM
does any one know what sensor r on the s13 sr20det tranny, is it the same as the pic above

Think about what you just asked for a second.

grnappletree14
01-28-2007, 07:56 PM
yea that pic above is for a sohc s13 tarnny, im looking for the jdm sr20det tranny.

Crono562
01-28-2007, 08:22 PM
that might be your reverse light sensor but im not sure, one of the sensors is.

projectRDM
01-28-2007, 10:43 PM
yea that pic above is for a sohc s13 tarnny, im looking for the jdm sr20det tranny.

It's the same transmission smart guy. The JDM one doesn't have the 4th gear switch, all the others are in the same location.

defiantmofo
01-28-2007, 11:50 PM
but they do use different connectors. don't they?

projectRDM
01-29-2007, 07:56 AM
but they do use different connectors. don't they?

Yes, what does that have to do with switch location?