DALAZ_68
01-08-2010, 10:41 AM
I have 1 panel left
stereo/lower din Delete panel (THE SQUARE ONE)
the panels I believe need some final fitting but otherwise should work fine
the holes were cut by the man himself (52mm)
pics bellow
these are quality pieces and im pretty sure they have become way harder to come by
http://i5.photobucket.com/albums/y162/whopper68/IMG_0411-1.jpg
http://i5.photobucket.com/albums/y162/whopper68/IMG_0414-1.jpg
anymore pics needed lemme know
panels - 55 shipped + PP fees
see below for kognition's response below:
The DIN panels are no longer in production. And those pictured are water jet cut. The S14 radio delete is still in production. You will need to taper the corners of the small DIN panels with 100 grit. And taper the back a little to fit into the DIN slot.
stereo/lower din Delete panel (THE SQUARE ONE)
the panels I believe need some final fitting but otherwise should work fine
the holes were cut by the man himself (52mm)
pics bellow
these are quality pieces and im pretty sure they have become way harder to come by
http://i5.photobucket.com/albums/y162/whopper68/IMG_0411-1.jpg
http://i5.photobucket.com/albums/y162/whopper68/IMG_0414-1.jpg
anymore pics needed lemme know
panels - 55 shipped + PP fees
see below for kognition's response below:
The DIN panels are no longer in production. And those pictured are water jet cut. The S14 radio delete is still in production. You will need to taper the corners of the small DIN panels with 100 grit. And taper the back a little to fit into the DIN slot.