WTB: OEM SR20DET Piston

[Touge180sx]

Looking for Grade 3 SR20DET Piston in great condition, Just need 1. Lemme know price shipped to 98229

[FRSport.com]

Looking for Grade 3 SR20DET Piston in great condition, Just need 1. Lemme know price shipped to 98229

We have a brand new oem piston for sr20det for $65.14 shipped!!!

Nissan OEM SR20DET Piston with Pin & Lock S13 S14 S15 RNN14 GTIR (http://www.frsport.com/Nissan-OEM-SR20DET-Piston-with-Pin---Lock-S13-S14-S15-RNN14-GTIR_p_1140.html)

Sincerely,
FRSport.com Team

[Touge180sx]

Need piston Grade 3

[SuperiorS14]

never heard of grade3 what exactly is it?

[speedfiend]

I'm pretty sure you are referring to the number that is on the inside of the piston. That just indicates the different sizes when being quickly assembled in the factory. Considering you are in need of just a single piston I would assume this motor has been well broken in hahhahah. So your cylinders are slightly larger then what they were brand new. Therefore you should be fine with pretty much any oem piston that you buy. Your clearances are probably going to be on the big side anyways so you should be good but you should check them anyways. I would highly recommend checking out of round and taper on the cylinder if you have had some sort of problem. You might be better off going with a .020 overbore or at least a fresh hone.

But on a side not I have a full set of pistons out of an s14 zenki sr. I would recommend new rings no matter what but other then that they are fine. I will find the best looking one if you are interested and shoot you a pic. Just pm me and let me know.
Thanx, Cameron

[ericb382]

I have a set of cp's that just went up on ebay today, starting at $200 with no reserve. They are 8.5:1 and 86.5mm. CP pistons SR20DET 8.5:1 86.5mm SC7327:eBay Motors (item 320472730483 end time Jan-16-10 12:36:14 PST) (http://cgi.ebay.com/ebaymotors/CP-pistons-SR20DET-8-5-1-86-5mm-SC7327_W0QQcmdZViewItemQQhashZitem4a9da9cb73QQitem Z320472730483QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fA ccessories)

I also have some stock pistons, 41,xxx miles on them before I spun a bearing. PM me an offer if you are interested.