quick question about oil filter block route

[rps13sh]

using this picture which side is the oil output and which one is the oil input?
http://i68.photobucket.com/albums/i7/japslapsilvia/DSC00289.jpg
im using this stance block and i dont know which side goes to what. i just need to know which route is in and out. if anyone knows please lmk asap.
http://stance-usa.com/sus/images/stories/engine/stnc-oilblockadapter.jpg

[s13drob]

have you tried turning the crank to feel which side airs coming from?

[310R]

I believe the fitting towards the rear is the one you are looking for.I have this same block on my car.The easy way to know is look at the back of the old filter housing and you will see the port that feeds the filter.Goodluck with your oil cooler,it makes a hell of a difference in oil temps especially at the track.What cooler you using?

[japslapsilvia]

the block in that pic is upside down,(my motor lol) and IIRC the fitting closest to the crank pully is the feed line and other is the return...i have to check when i get home.

[ManoNegra]

http://i2.frsimg.com/images/detailed_images/TomeiExample2.jpg


took me 2 seconds searching.... sigh

[rps13sh]

what was your keywords? i swear i tried. good looking out though.

310R - im using a ARC oil cooler with ARC filter relocator and the stance oil block adaptor.