s14 ABS brake bleeding?

[24DZ]

I'm having a problem bleeding my brakes in my ABS equipped S14. I've done the research on how to do it. I've even read a thread on this site, but it's not bleeding out the fluid properly. It starts off with a few streams, and then it just stops. Just a few drops after that. Has anyone had this problem before, if so what did you do to fix it? Thanks.

[projectRDM]

I'm guessing you've unplugged the ABS actuator, correct?

If not, you'll never get them bled. Unplug the main power (large 2pin plug with red and black wires) and then bleed as normal.

[g6civcx]

Or you can disconnect the negative battery terminal.

All this is outlined in the FSM-BR section.

[24DZ]

I'll try unplugging the the main power to the actuator and see if that works. But i did disconnect the negative side of the battery when i did it. I would think it was the same as disconnecting the large 2pin plug with red and black wires. Thanks for the help guys. (if it still doesn't work, what do you think the problem would be? Thanks again.

[240sxfamily]

good luck with this, took me like 4 hours on my s13. lol.