PDA

View Full Version : 5 lug swap?

Driftin_240sx
05-31-2003, 01:38 PM
ok well i got my flame suit on, but i have searched and i still dont really have a straight answer on what to do, .. i am buy a 5 lug swap from someone on the board hopefully, now it comes with front splindes, hubs, rotors, and 2 rear rotors, hubs from a S14 and i am planning on going to 3z brakes also, so now my real question is... what do i need to do for the 5 lug swap, can i just bolt up the hubs and get the lower control arm and itll be all good? or will i have to press out the rear hub to make it work on a s13? i guess i am looking at whatever help u can give me. please not to many flames i searched and i am just lookin for some straight answers.

also anyone have some stock 5 lug wheels for sale?

david
Jim96SC2
05-31-2003, 01:41 PM
Easy 5-lug for dummies:

1) Call JSPEC and order a set of ATTAIN hubs (~$400).

2) Go to Nissan dealer and buy a set of S14SE 5-lug rear hubs.

3) Once assembled put front hubs in place (you retain stock S13 suspension) and put rear hubs in place. DO NOT FORGET TO GET 5-lug ROTORS! (off S14SE)
Driftin_240sx
05-31-2003, 01:45 PM
what is so different that i cant just use the whole s14 spindle and everthing?

david
FRpilot
05-31-2003, 02:07 PM
you need more than the 5 lug hubs.. if i recall correctly, you'll need: 5 lug hubs, s14 spindles because they are slightly larger, and s14 ball joints pushed into s13 LCAs. this is for the front.

for the rear, you can use z32 n/a 5 lug hubs or s14.
Driftin_240sx
05-31-2003, 02:11 PM
ok well what i guess i am tryin to get at is will this all just bolt up, besides the lower conrol arm in front.

here is the pic of what it all comes with...

http://www.zilvia.net/f/attachment.php?s=&postid=251785

david
Jim96SC2
05-31-2003, 02:17 PM
Dude, with the amount of money you spend on LCA's, Spindles and hubs you could get Attains that just bolt right in.
AzNCmB
05-31-2003, 03:01 PM
Would driftin_240sx's setup work on a base model 95 240sx??
Driftin_240sx
05-31-2003, 03:04 PM
yes for as far as i know it would be a straight bolt on for you the only diff. is for me is the front lower control arm is shorter so i would have to get one with a s14 ball joint.

david