drift donkey
12-31-2009, 01:02 PM
Here is the price breakdown for anyone looking for parts.
I would really like to keep the engine complete, becuase I dont have another turbo's. If you would like the engine with anything less then what is listed let me know and I can adjust the pricing.
I aslo forgot I have a B&M short throw shifter on the transmission!
As far as install goes the price for install will be $1000.00. The only way I will do the install is if you have all nesscary parts to complete the install or if you purchase the whole package deal. Sorry, I am not a shop and dont have the time to look for parts.
3000.00 OBO
Complete Sr20det engine with wire harness and ecu + Apexi SAFC + 550cc Deatshwerks injectors + Nismo fuel pressurehttp://images.intellitxt.com/ast/adTypes/2_bing.gif (http://zilvia.net/f/#) regulator + 255 Warblo fuel pump + power enterprise belts(kevlar)+ Guage cluster w/ correct RPM meter installed OEM
Nismo engine and trans mounts
6-puck sprung hub Southland Clutch w/ OEM flywheel
Megan Racing exhaust manifold w/ Nissan T28 Turbine w/ Greddy elbow and 3in down pipe with O2 sensor bung installed.
Turbo line are braided steel with Earl's fittings
One-piece steel driveshaft for NON-ABS (sold)
350.00
Greddy front mount intercooler and all the pipping
Greddy RS blowoff valve installed on intercooler pipping
60.00
Powersteering resivour and high pressure line/purchased about a year ago. (NO hard lines)
175.00
AEM TRU-boost controller
To answer your questions:
The tires are SOLD, sorry.
The trans does come with the engine set. It is not the trans that needs a rebuild. It is in great shape as was rebuilt buy Aamco a while back.
Thanks again!
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 181KB. http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 181KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture028-1.jpg
Install is also available you will need 91 and up powersteering hard lines, fluids, electric fans, heater hoses, and 3in exhaust system to finish the install. unless you like getting tickets. I can also post video of the setup in action if needed.
What you don't get: the valve cover! It will come with a goldish OEM colored valve cover.
I have done the math on this and this setup it is worth well over $5000.00. I invite you to do the math for yourselfs too. You might ask why am I selling all of this prefectly good stuff! Well I am movin to a different powerhttp://images.intellitxt.com/ast/adTypes/2_bing.gif (http://zilvia.net/f/#) plant.
$100-SR20det s13 bare cylinder head. This a complete bare bones head. It would be great for someone looking to start from scatch.
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 145KB. http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 145KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture009-1.jpg
$200-Sr20det s13 transmission. Need a rebuild 2nd gear (http://zilvia.net/f/#) syncro is going out. it won't stay in gear. PM if you need a pic.
$100-sard fuel (http://zilvia.net/f/#) rail. Sorry I don't have any of the fittings or hardware.
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 157KB. http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 157KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture018-1.jpg
$100-SR20det S13 redtop valve cover. This has been sand blasted, but was left out when I was painting my car (http://zilvia.net/f/#) and got some over spray out it. Just needs some TLChttp://northwestnissans.com/board/images/smilies/greywacko.gif
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 73KB. http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 73KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture022-1.jpg
$60-300zx rear brake calipers.
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 127KB. http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 127KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture026-1.jpg
$50-SR20det coilpacks used.
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 159KB. http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 159KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture003-1.jpg
I would really like to keep the engine complete, becuase I dont have another turbo's. If you would like the engine with anything less then what is listed let me know and I can adjust the pricing.
I aslo forgot I have a B&M short throw shifter on the transmission!
As far as install goes the price for install will be $1000.00. The only way I will do the install is if you have all nesscary parts to complete the install or if you purchase the whole package deal. Sorry, I am not a shop and dont have the time to look for parts.
3000.00 OBO
Complete Sr20det engine with wire harness and ecu + Apexi SAFC + 550cc Deatshwerks injectors + Nismo fuel pressurehttp://images.intellitxt.com/ast/adTypes/2_bing.gif (http://zilvia.net/f/#) regulator + 255 Warblo fuel pump + power enterprise belts(kevlar)+ Guage cluster w/ correct RPM meter installed OEM
Nismo engine and trans mounts
6-puck sprung hub Southland Clutch w/ OEM flywheel
Megan Racing exhaust manifold w/ Nissan T28 Turbine w/ Greddy elbow and 3in down pipe with O2 sensor bung installed.
Turbo line are braided steel with Earl's fittings
One-piece steel driveshaft for NON-ABS (sold)
350.00
Greddy front mount intercooler and all the pipping
Greddy RS blowoff valve installed on intercooler pipping
60.00
Powersteering resivour and high pressure line/purchased about a year ago. (NO hard lines)
175.00
AEM TRU-boost controller
To answer your questions:
The tires are SOLD, sorry.
The trans does come with the engine set. It is not the trans that needs a rebuild. It is in great shape as was rebuilt buy Aamco a while back.
Thanks again!
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 181KB. http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 181KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture028-1.jpg
Install is also available you will need 91 and up powersteering hard lines, fluids, electric fans, heater hoses, and 3in exhaust system to finish the install. unless you like getting tickets. I can also post video of the setup in action if needed.
What you don't get: the valve cover! It will come with a goldish OEM colored valve cover.
I have done the math on this and this setup it is worth well over $5000.00. I invite you to do the math for yourselfs too. You might ask why am I selling all of this prefectly good stuff! Well I am movin to a different powerhttp://images.intellitxt.com/ast/adTypes/2_bing.gif (http://zilvia.net/f/#) plant.
$100-SR20det s13 bare cylinder head. This a complete bare bones head. It would be great for someone looking to start from scatch.
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 145KB. http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 145KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture009-1.jpg
$200-Sr20det s13 transmission. Need a rebuild 2nd gear (http://zilvia.net/f/#) syncro is going out. it won't stay in gear. PM if you need a pic.
$100-sard fuel (http://zilvia.net/f/#) rail. Sorry I don't have any of the fittings or hardware.
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 157KB. http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 157KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture018-1.jpg
$100-SR20det S13 redtop valve cover. This has been sand blasted, but was left out when I was painting my car (http://zilvia.net/f/#) and got some over spray out it. Just needs some TLChttp://northwestnissans.com/board/images/smilies/greywacko.gif
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 73KB. http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 73KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture022-1.jpg
$60-300zx rear brake calipers.
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 127KB. http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 127KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture026-1.jpg
$50-SR20det coilpacks used.
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 159KB. http://zilvia.net/f/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 159KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture003-1.jpg