driftstar_180sx
12-25-2009, 01:32 PM
:newbie:hi im new to zilvia so i hoped i posted this thread in the right place. well i have a 89 240sx that had a single cam in it and i swapped it for the dohc. the dohc motor i bought came with the ecu, wire harness, trans, maf. i connected every thing and the car started on the first try but when i drove it it would idle normal but when i would give it gas and then let off the pedal, it would not go down to the normal idle it idles faster. dont know what it could be. also the rev limiter on the cluster dont work what do i need? i wanted to know if my clutch cylinder on the pedal is bad because i try to bleed the line but the pedal still feels funny you step on the pedal and it goes in about one inch and then you can feel the pedal working as if their is still air in the line but i bleed the line twice. any help will be appreciated. thank you, you can email me at [email protected]