MrFuel
12-24-2009, 11:32 PM
The time has come to move one from the scene. I also need to pay off some debt. So im selling my 1990 Coupe..I've taking great care of this car and built it with high end quality parts.
I'm looking to get 7,000 . I think it's fair for the quality parts and work that has been put into my car.
Interior is real clean. The dash has no cracks.
Year: 1990
Tittle: Clean
Miles: 220,000 on car/ 43,+++ on motor
Location: Sacramento
Price: 7,000
Heater works great. But no A/C in the car.
Engine:
- 97 S13 SR20DET BlackTop TypeX 43,+++ miles
-Cusco solid motor mounts
-Apexi Turbo Timer
-STRI Boost gauge
-HKS GT-RS Turbo
-HKS Turbo Manifold
-HKS Turbo Elbow
-HKS BOV
-HKS Wastgate
-HKS Oil cap
-Stainless turbo lines
-Megan 3inch DownPipe
-Megan 3inch Test Pipe
-Megan Racing 3inch Exhaust
-Front mount intercoolr kit
-Koyo Radiator
-Samco "Blue" radaitor hoses
-14inch Electric fan
-Blitz air filter
-Welded Differential
Suspension:
-Apexi N1 Damper Expert Type-V Coilovers
-Tein Inner/Outer Tie Rods w/ 300Z boots
-SPL Rear RUCAS
-SPL Rear adj traction rods
-SPL rear adj tension rods
-Lower tie bar
-SPL Front adj tension rods
-Front Brembo Cross/Drilled rotors
-Rear Brembo Cross/Drilled rotors
-Hawk Ceramic brake pads Front
-ProjectMU brake pads rear
Exterior:
-OEM Silvia front end conversion
-22mm Wide vented front fenders
-Dmax Type 1 Full body kit.
-Dmax rear wing
-OEM S13 side mirrors
-F1Spec 8000k HID's
-Origin Red&White Smoked Tail Lights
-Origin smoked clear bumper lights
-Work EWING MOD III rims (16x8 +12 front/ 16x8 -0 rear)
Interior:
-Top of the line Compustar Alarm
-JDM Gauge Cluster
-Cusco Saftey21 5pt roll cage
-Nardi 330mm Steering wheel
-NRG Short hub
-F1Spec type3 bucket seats (blue)
-Buddy seat rails/sliders/brackets
-Trust shift knob
Cons:
-Has two cracks in the front windsheild
-Needs a powersteering belt. But it does work.
This is what the front bumper looks like. It's seen it's better days but still holds up and looks good. Also In these pictues..It doesn't have the Dmax wing installed. but It is on the car.
I'll post up some interior and engine shots later.
http://i13.photobucket.com/albums/a263/MrTopFuel/03.jpg
http://i13.photobucket.com/albums/a263/MrTopFuel/untitled-2.jpg
http://i13.photobucket.com/albums/a263/MrTopFuel/l_e4007b933d0d4b8eb1be8d2a9b030e49.jpg
http://i13.photobucket.com/albums/a263/MrTopFuel/l_d8af3c06288648fa95089a378611ecab.jpg
http://i13.photobucket.com/albums/a263/MrTopFuel/l_997477ae99de45ee8dc0bfbabc6f58df.jpg
I'm looking to get 7,000 . I think it's fair for the quality parts and work that has been put into my car.
Interior is real clean. The dash has no cracks.
Year: 1990
Tittle: Clean
Miles: 220,000 on car/ 43,+++ on motor
Location: Sacramento
Price: 7,000
Heater works great. But no A/C in the car.
Engine:
- 97 S13 SR20DET BlackTop TypeX 43,+++ miles
-Cusco solid motor mounts
-Apexi Turbo Timer
-STRI Boost gauge
-HKS GT-RS Turbo
-HKS Turbo Manifold
-HKS Turbo Elbow
-HKS BOV
-HKS Wastgate
-HKS Oil cap
-Stainless turbo lines
-Megan 3inch DownPipe
-Megan 3inch Test Pipe
-Megan Racing 3inch Exhaust
-Front mount intercoolr kit
-Koyo Radiator
-Samco "Blue" radaitor hoses
-14inch Electric fan
-Blitz air filter
-Welded Differential
Suspension:
-Apexi N1 Damper Expert Type-V Coilovers
-Tein Inner/Outer Tie Rods w/ 300Z boots
-SPL Rear RUCAS
-SPL Rear adj traction rods
-SPL rear adj tension rods
-Lower tie bar
-SPL Front adj tension rods
-Front Brembo Cross/Drilled rotors
-Rear Brembo Cross/Drilled rotors
-Hawk Ceramic brake pads Front
-ProjectMU brake pads rear
Exterior:
-OEM Silvia front end conversion
-22mm Wide vented front fenders
-Dmax Type 1 Full body kit.
-Dmax rear wing
-OEM S13 side mirrors
-F1Spec 8000k HID's
-Origin Red&White Smoked Tail Lights
-Origin smoked clear bumper lights
-Work EWING MOD III rims (16x8 +12 front/ 16x8 -0 rear)
Interior:
-Top of the line Compustar Alarm
-JDM Gauge Cluster
-Cusco Saftey21 5pt roll cage
-Nardi 330mm Steering wheel
-NRG Short hub
-F1Spec type3 bucket seats (blue)
-Buddy seat rails/sliders/brackets
-Trust shift knob
Cons:
-Has two cracks in the front windsheild
-Needs a powersteering belt. But it does work.
This is what the front bumper looks like. It's seen it's better days but still holds up and looks good. Also In these pictues..It doesn't have the Dmax wing installed. but It is on the car.
I'll post up some interior and engine shots later.
http://i13.photobucket.com/albums/a263/MrTopFuel/03.jpg
http://i13.photobucket.com/albums/a263/MrTopFuel/untitled-2.jpg
http://i13.photobucket.com/albums/a263/MrTopFuel/l_e4007b933d0d4b8eb1be8d2a9b030e49.jpg
http://i13.photobucket.com/albums/a263/MrTopFuel/l_d8af3c06288648fa95089a378611ecab.jpg
http://i13.photobucket.com/albums/a263/MrTopFuel/l_997477ae99de45ee8dc0bfbabc6f58df.jpg