MrMcgarrett
12-23-2009, 07:19 PM
Well I'm tired of bumping a bunch of threads so I'm putting everything in one.
SERIOUS BUYERS ONLY!!!!!!!!
Please don't tell me you want something then disappear.
It is very annoying.
Also please make sure you
http://i92.photobucket.com/albums/l5/MrMcgarrett/mofo2gh1.gif
Ok on to the parts....
Bride Ergo-$475obo
Not parting out the rail unless you want to pay a lot for it.
Seat is in great condition.
No rips/tears/cig burns etc.
Back is a little loose due to age.
Seat is very comfortable.
Might be kinda tight for anyone over a 36 waist.
Rail is a Bride MO.
http://i92.photobucket.com/albums/l5/MrMcgarrett/brideseat001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/brideseat003.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/brideseat002.jpg
M Sports style hood-$250obo
pick up only
I can deliver it in the LA/OC/IE areas for gas money.
Hood is in good condition.
The under structure is coming loose in some spots.
Very light, around 13lbs.
Made of fiberglass.
Fits very good for an aftermarket hood.
It has a latch but I'd use hood pins also.
I don't know what brand it is.
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood006.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood007.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood008.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood009.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood011.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood012.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood010.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood013.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood014.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood015.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood016.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood017.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood019.jpg
HID retrofit-$280 shipped
Price is FIRM
Not parting out
These are REAL HID lights. No Ebay junk.
Set up is complete.
-Valeo xenon projectors
-Philips ballast
-Philips D2R bulbs
-Pre-wired Harness
The harness has a HB4 plug(J30, Z32) that can be easily switched out for any application.
The projectors have 2.5in lenses.
The projectors measure 3.5in high, 4in wide, and 6in long from the lens to the bulb plug.
Easy to hook up after retrofitting the projectors.
Just bolt down the ground wires on the ballast, hook the power cable up to the positive battery terminal, then plug in one of your headlight plugs to turn them on and off.
http://i92.photobucket.com/albums/l5/MrMcgarrett/HIDsetup001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/HIDsetup002.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/HIDsetup003.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/HIDsetup004.jpg
S13 foglights-$160 shipped
Got a set of Bosch fog lights for S13.
The lights are old but are new.
The mounting brackets and wiring are used.
The lights are 6.5in x 3in.
They are pre wired and you just have to bolt down the ground wire, hook up the power wire to the positive battery terminal then run the switch to the interior.
The wire for power to the switch can be hooked to the battery so the lights can be turned on with the car off or to a ignition ON power wire so they can only be turned on when the car is on.
They use H3 bulbs.
http://i92.photobucket.com/albums/l5/MrMcgarrett/S13foglights002.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/S13foglights003.jpg
Wire to hook up the switch power wire to if you want to only be able to turn them on with the car on:
http://i92.photobucket.com/albums/l5/MrMcgarrett/foglightwiring002.jpg
It is green with a blue stripe and silver dots.
Here is what they look like on my chuki bumper:
http://i92.photobucket.com/albums/l5/MrMcgarrett/S13foglights.jpg
On my friends pignose bumper:
http://i92.photobucket.com/albums/l5/MrMcgarrett/foglights001.jpg
Z32 ebrake assembly-$110 shipped
Both are in good condition.
They have a lot of brake dust on them, no rust.
Backing plates are nice and straight.
Shoes have lots of life left.
These are for non-tabbed hubs.
http://i92.photobucket.com/albums/l5/MrMcgarrett/ebrakeassembly.jpg
White bunny clutch-$180 shipped obo
I was going to install this when I do my 5spd swap but that isn't happening anytime soon.
More info on this setup: 240sx white bunny clutch setup: 240SX Forum / 180SX Forum / Silvia Forum: Nissan Forums / Infiniti Forums - NICOclub (http://forums.nicoclub.com/zerothread/227129)
It is a n/a Z32 Seco clutch disk and pressure plate and a D21 pickup flywheel.
The clutch is used but pretty much new.
Only mod that needs to be done is part of the dust shield needs to be cut off.
The D21 flywheel is shaped differently on the back and will rub the dust shield.
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutchsetup001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutchsetup002.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutchsetup004.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutchsetup005.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutchsetup006.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutchsetup007.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutchsetup008.jpg
Pics of what needs to be cut off the dust shield:
http://i92.photobucket.com/albums/l5/MrMcgarrett/kadustshield-1.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/kadustshield2.jpg
Stillen Q45 strut tower bar-$90 shipped
For 90-96 Q45s.
Very nice and beefy CNC'd aluminum.
http://i92.photobucket.com/albums/l5/MrMcgarrett/q45stb.jpg
Z32 rear brake pads-$20 shipped
Brand new set of Duralast pads.
http://i92.photobucket.com/albums/l5/MrMcgarrett/z32rearpads.jpg
SERIOUS BUYERS ONLY!!!!!!!!
Please don't tell me you want something then disappear.
It is very annoying.
Also please make sure you
http://i92.photobucket.com/albums/l5/MrMcgarrett/mofo2gh1.gif
Ok on to the parts....
Bride Ergo-$475obo
Not parting out the rail unless you want to pay a lot for it.
Seat is in great condition.
No rips/tears/cig burns etc.
Back is a little loose due to age.
Seat is very comfortable.
Might be kinda tight for anyone over a 36 waist.
Rail is a Bride MO.
http://i92.photobucket.com/albums/l5/MrMcgarrett/brideseat001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/brideseat003.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/brideseat002.jpg
M Sports style hood-$250obo
pick up only
I can deliver it in the LA/OC/IE areas for gas money.
Hood is in good condition.
The under structure is coming loose in some spots.
Very light, around 13lbs.
Made of fiberglass.
Fits very good for an aftermarket hood.
It has a latch but I'd use hood pins also.
I don't know what brand it is.
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood006.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood007.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood008.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood009.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood011.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood012.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood010.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood013.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood014.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood015.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood016.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood017.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/fghood019.jpg
HID retrofit-$280 shipped
Price is FIRM
Not parting out
These are REAL HID lights. No Ebay junk.
Set up is complete.
-Valeo xenon projectors
-Philips ballast
-Philips D2R bulbs
-Pre-wired Harness
The harness has a HB4 plug(J30, Z32) that can be easily switched out for any application.
The projectors have 2.5in lenses.
The projectors measure 3.5in high, 4in wide, and 6in long from the lens to the bulb plug.
Easy to hook up after retrofitting the projectors.
Just bolt down the ground wires on the ballast, hook the power cable up to the positive battery terminal, then plug in one of your headlight plugs to turn them on and off.
http://i92.photobucket.com/albums/l5/MrMcgarrett/HIDsetup001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/HIDsetup002.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/HIDsetup003.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/HIDsetup004.jpg
S13 foglights-$160 shipped
Got a set of Bosch fog lights for S13.
The lights are old but are new.
The mounting brackets and wiring are used.
The lights are 6.5in x 3in.
They are pre wired and you just have to bolt down the ground wire, hook up the power wire to the positive battery terminal then run the switch to the interior.
The wire for power to the switch can be hooked to the battery so the lights can be turned on with the car off or to a ignition ON power wire so they can only be turned on when the car is on.
They use H3 bulbs.
http://i92.photobucket.com/albums/l5/MrMcgarrett/S13foglights002.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/S13foglights003.jpg
Wire to hook up the switch power wire to if you want to only be able to turn them on with the car on:
http://i92.photobucket.com/albums/l5/MrMcgarrett/foglightwiring002.jpg
It is green with a blue stripe and silver dots.
Here is what they look like on my chuki bumper:
http://i92.photobucket.com/albums/l5/MrMcgarrett/S13foglights.jpg
On my friends pignose bumper:
http://i92.photobucket.com/albums/l5/MrMcgarrett/foglights001.jpg
Z32 ebrake assembly-$110 shipped
Both are in good condition.
They have a lot of brake dust on them, no rust.
Backing plates are nice and straight.
Shoes have lots of life left.
These are for non-tabbed hubs.
http://i92.photobucket.com/albums/l5/MrMcgarrett/ebrakeassembly.jpg
White bunny clutch-$180 shipped obo
I was going to install this when I do my 5spd swap but that isn't happening anytime soon.
More info on this setup: 240sx white bunny clutch setup: 240SX Forum / 180SX Forum / Silvia Forum: Nissan Forums / Infiniti Forums - NICOclub (http://forums.nicoclub.com/zerothread/227129)
It is a n/a Z32 Seco clutch disk and pressure plate and a D21 pickup flywheel.
The clutch is used but pretty much new.
Only mod that needs to be done is part of the dust shield needs to be cut off.
The D21 flywheel is shaped differently on the back and will rub the dust shield.
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutchsetup001.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutchsetup002.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutchsetup004.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutchsetup005.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutchsetup006.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutchsetup007.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/wbclutchsetup008.jpg
Pics of what needs to be cut off the dust shield:
http://i92.photobucket.com/albums/l5/MrMcgarrett/kadustshield-1.jpg
http://i92.photobucket.com/albums/l5/MrMcgarrett/kadustshield2.jpg
Stillen Q45 strut tower bar-$90 shipped
For 90-96 Q45s.
Very nice and beefy CNC'd aluminum.
http://i92.photobucket.com/albums/l5/MrMcgarrett/q45stb.jpg
Z32 rear brake pads-$20 shipped
Brand new set of Duralast pads.
http://i92.photobucket.com/albums/l5/MrMcgarrett/z32rearpads.jpg