Log in

View Full Version : Trans. wont go into gear

1quk240
12-21-2009, 06:45 PM
The trans. will go in gear while car is off but when i go to put it in any gear it will not go. Thinking maybe i need to adjust the pedal? Any help would be great. This is for an s13 sr
mattsil80wis
12-21-2009, 06:59 PM
bleed the system and adjust the pedal
mazersx
12-21-2009, 07:02 PM
air in the clutch system?? need new master or slave cylinder?
1quk240
12-21-2009, 07:04 PM
bleed the system and adjust the pedal

I bled it just didn't adjust the pedal yet. Also noticed that for some reason the rod that pushes the clutch on the slave cylinder looks crooked
mattsil80wis
12-21-2009, 08:18 PM
I bled it just didn't adjust the pedal yet. Also noticed that for some reason the rod that pushes the clutch on the slave cylinder looks crooked


lol weird but i would be replacing the master cylinder than
Big Zee
12-21-2009, 08:22 PM
^ +1, that would be good reason the clutch isn't working proper.

I would do that before adjusting the pedal
1quk240
12-21-2009, 08:28 PM
^ +1, that would be good reason the clutch isn't working proper.

I would do that before adjusting the pedal

Just curious...do they randomly go bad? Cuz it worked before I pulled the motor
93nismo
12-21-2009, 08:31 PM
that happened in my z and it was the master cyl.
1quk240
12-21-2009, 08:40 PM
OK well I guess ill have to swap them out.
1quk240
12-29-2009, 11:49 PM
update! Well i replaced the slave cylinder and it was still doing the same thing. So, I then removed the cylinder and grabbed the fork and gave it a very little wiggle and BAM there's the problem...the piviot ball inside the trans. was broken. so i swapped it with one for a Z(just as strong as a nismo and only $20) problem solved. Now to figure out why my gauge cluster isnt working???