PDA

View Full Version : CA FS 03' NISSAN 350Z G35 3.5 Engine VQ35 OEM


JDMJNKY
12-15-2009, 10:43 PM
Contact: Victor 909 543 8881
Email: [email protected]
Location: SO.Cal - I.E.


Any questions PM me, and I'll answer to the best of my ability! If I do not know, you will receive your reply w/in 24hrs. This is a legit engine, legit vins, etc. Being listed for a certified Nisaan/Infinity tech.


Asking $2400 OBO
USED Lo-Mileage 05' 27k mileage NISSAN 350Z G35 3.5 Engine VQ35 OEM Long-Block Fully Running Condition!

Specs: 350Z
3,498 cc 3.5 liters V 6 front engine with 95.5 mm bore, 81.4 mm stroke,
compression ratio : 10.3 : 1
Engine Block/Cylinder Head : Aluminum-Alloy
double overhead cam, variable valve timing/camshaft
four valves per cylinder VQ35DE
Multi-point injection fuel system
Electronic Drive by Wire throttle
Power: 287 HP SAE @ 6,200 rpm; 274 ft lb @ 4,800 rpm

Interchange Info below :
A
------------
350Z 04 (3.5L, VIN A, 4th digit, VQ35DE), from 10/03
350Z 05 (3.5L, VIN A, 4th digit, VQ35DE), exc. 35th Anniversary model; thru 10/04
B
------------
350Z 05 (3.5L, VIN A, 4th digit, VQ35DE), exc. 35th Anniversary model; from 11/04
350Z 06 (3.5L, VIN A, 4th digit, VQ35DE), AT


Nissan 3.5L, VQ35DE engine. V6 cyl.
VIN "A", 4th digit (Nissan 350Z).
Fuel injected (M.F.I.).
287 HP. DOHC. 24-valve. RWD.
|B| fits |A| by also including the upper water pipe & EGI brackets

http://i162.photobucket.com/albums/t274/JDMJNKY/For%20sale/P1000197.jpg

http://i162.photobucket.com/albums/t274/JDMJNKY/For%20sale/P1000198.jpg

http://i162.photobucket.com/albums/t274/JDMJNKY/For%20sale/P1000201.jpg

http://i162.photobucket.com/albums/t274/JDMJNKY/For%20sale/P1000202.jpg

http://i162.photobucket.com/albums/t274/JDMJNKY/For%20sale/P1000204.jpg

juve_240sx
12-15-2009, 11:43 PM
are u wiling t ship or just local pick up?

JDMJNKY
12-16-2009, 07:18 AM
Shipping is fine too I estimate around 3-400 in the US. I've shipped heads and short blocks separately!

It's actually an 05' engine 27k miles

DALAZ_68
12-16-2009, 08:41 AM
Shipping is fine too I estimate around 3-400 in the US. I've shipped heads and short blocks separately!

It's actually an 05' engine 27k miles


you can also try COD shipping if buyer is willing to supply you with with a few bucks for crating material...just a though...GLW...

JDMJNKY
12-18-2009, 12:44 PM
That shouldn't be an issue either! Very possible, if the OP is willing

JDMJNKY
12-20-2009, 06:00 PM
bump to the top

JDMJNKY
12-29-2009, 08:46 PM
will trade for 240 coupe!

uzbekuz
12-29-2009, 09:41 PM
Hi,

Do you have pre cat converters from this engine?

Will they fit Altima 3.5 2004?

Because I also have VQ35DE engine.

Thanks!

JDMJNKY
12-31-2009, 06:21 PM
No sir I do not