CHEAP used S-13 megan adjustable outer tie rod ends

[racepar1]

I was going to use these parts and replace the bearings, but I decided to go much crazier then that. First off, the bearings in these are SHOT. I would not reccomend that you run them like this. You can probably source upgraded replacements for not very much money through GSXRJJordan here though. I believe the thread size and pitch is 14mmx1.5mm. They are for S-13...

SOLD!

[GSXRJJordan]

Double check those threads, I thought they were m12x1.25.

[racepar1]

Double check those threads, I thought they were m12x1.25.

I think that's the tie rod thread...

I checked and they are indeed 14x1.5.

[GSXRJJordan]

I think that's the tie rod thread...

I checked and they are indeed 14x1.5.

I thought they were the same, but I guess not!

I've got M14x1.50 top-end heims in stock. Some 14k lbs static load rated, these things are beefy enough to be LCA heims lol. Chrome-moly shank, teflon/nylon race, maintenance free. If whoever buys these wants to replace the heims, they'll be $32 for the pair plus shipping if outside the 626 area.
I might even have a pair of boots laying around to seal them from dust/water/etc.

[racepar1]

First bump, price lowered........