Ultimate Sr20det sale! If can find better deals by them!

[drift donkey]

Item Description:Please PM me if want more pics or have any questions. Price are negotiable, please no low ballers!

Sr20det motorset package deal!
Alright this enigne is currently in my s13 right now it runs like new and was completely rebuilt no less then 6000mi ago by me! Its has a stock bottom end and head. The head had a 3 way valve job done before it was installed. Everything I am going to list will come with the package deal. If you guys want me to break up the package I will have to get back to you on prices. Well enough talk, heres what you will get.


$4000.00 OBO
Complete Sr20det engine with wire harness and ecu + Apexi SAFC + 550cc Deatshwerks injectors + Nismo fuel pressure regulator + 255 Warblo fuel pump + power enterprise belts(kevlar)
6-puck sprung hub Southland Clutch w/ OEM flywheel
Megan Racing exhaust manifold w/ Nissan T28 Turbine w/ Greddy elbow and 3in down pipe with O2 sensor bung installed. Turbo line are braided steel with AN fittings
One-piece steel driveshaft
Greddy front mount intercooler and all the pipping
Greddy RS blowoff valve installed on intercooler pipping
Guage cluster w/ correct RPM meter installed OEM
Nismo engine and trans mounts
Powersteering resiour and high pressure line
AEM TRU-boost controller
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 181KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture028-1.jpg
Install is also available you will need 91 and up powersteering hard lines, fluids, electric fans, heater hoses, and 3in exhaust system to finish the install. unless you like getting tickets. I can also post video of the setup in action if needed.

What you don't get: the valve cover! It will come with a goldish OEM colored valve cover.

I have done the math on this and this setup it is worth well over $5000.00. I invite you to do the math for yourselfs too. You might ask why am I selling all of this prefectly good stuff! Well I am movin to a different power plant.



$100-SR20det s13 bare cylinder head. This a complete bare bones head. It would be great for someone looking to start from scatch.
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 145KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture009-1.jpg


$200-Sr20det s13 transmission. Need a rebuild 2nd gear syncro is going out. it won't stay in gear. PM if you need a pic.




$100-sard fuel rail. Sorry I don't have any of the fittings or hardware.
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 157KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture018-1.jpg



$150-used GTR fuel pump.
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 88KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture015.jpg



$100-2 G-force ta BFG tires 98% tread 215/45r17
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 125KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture023-1.jpg


$100-SR20det S13 redtop valve cover. This has been sand blasted, but was left out when I was painting my car and got some over spray out it. Just needs some TLChttp://northwestnissans.com/board/images/smilies/greywacko.gif
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 73KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture022-1.jpg


$60-300zx rear brake calipers.
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 127KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture026-1.jpg

$50-SR20det coilpacks used.
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 159KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture003-1.jpg


$20-oil filter relotaion kit, no name brand.
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 156KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture016-1.jpg

$10(left one) $40(right one) Benzels!
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 117KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture002-1.jpg

$30-roll of thermal sleeve color Tan, rated for 155deg C, size 3/4
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 91KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture021-1.jpg

$20-s14 drivers side knuckle
http://www.northwestnissans.com/board/images/statusicon/wol_error.gifThis image has been resized. Click this bar to view the full image. The original image is sized 800x600 and weights 158KB.http://i121.photobucket.com/albums/o208/paco4sex/Picture025-1.jpg

[sr20det-s14]

those radio covers for a 13

[turboh224g]

do you have the other part of the filter relocation that the filter mounts to?

[skyvia686]

redtop head. does it need any machining? lmk pm

[drift donkey]

Tires, oil kit, fuel pump, and 4 rods sold.
It is a redtop head and it shouldn't needed any machining, I don't have the caps for the cam shafts. I did find a lot of the stock hardware for the head valve springs, valve etc.

[silverdemon16]

can I get those thermal sleeves for 20 shipped if so I'll take them thx man

[payne219]

Yo is this paul? Ben says your going LS1.... its Ryan btw, i bought that sr off u in coronado


BUMP for a legit Guy

[drift donkey]

Hey byan! Yep I am turning in my SR for a LS2. I just picked up a block and trans. It going to be some work, but I plan to have it done by FEB if everything goes as planned. I will be starting a thread when I get the block back from machining. Thanks for the bump! I heard you turned in your SR too. O well:cool: talk to you later!

Bye the way if anyone would like parts from the package deal please feel free to ask and i will shoot u a price.

[drift donkey]

just in case you guys didn't see the last post I am willing to split the package up:barf:

[drift donkey]

I went home for xmas so please bear with me until i get back after the first of the year.

[lightsource]

How much would shipping be fore tires to 90221

[sposa]

Is the tranny included in this package

[drift donkey]

Here is the price breakdown for anyone looking for parts.
I would really like to keep the engine complete, becuase I dont have another turbo's. If you would like the engine with anything less then what is listed let me know and I can adjust the pricing.
I aslo forgot I have a B&M short throw shifter on the transmission!
As far as install goes the price for install will be $1000.00. The only way I will do the install is if you have all nesscary parts to complete the install or if you purchase the whole package deal. Sorry, I am not a shop and dont have the time to look for parts.

3000.00 OBO
Complete Sr20det engine with wire harness and ecu + Apexi SAFC + 550cc Deatshwerks injectors + Nismo fuel pressure regulator + 255 Warblo fuel pump + power enterprise belts(kevlar)+ Guage cluster w/ correct RPM meter installed OEM
Nismo engine and trans mounts
6-puck sprung hub Southland Clutch w/ OEM flywheel
Megan Racing exhaust manifold w/ Nissan T28 Turbine w/ Greddy elbow and 3in down pipe with O2 sensor bung installed.
Turbo line are braided steel with Earl's fittings

One-piece steel driveshaft for NON-ABS (sold)

350.00
Greddy front mount intercooler and all the pipping
Greddy RS blowoff valve installed on intercooler pipping

60.00
Powersteering resivour and high pressure line/purchased about a year ago. (NO hard lines)

175.00
AEM TRU-boost controller

To answer your questions:

The tires are SOLD, sorry.

The trans does come with the engine set. It is not the trans that needs a rebuild. It is in great shape as was rebuilt buy Aamco a while back.

Thanks again!

[drift donkey]

bump bump bump

[racerx2k1]

Hey byan! Yep I am turning in my SR for a LS2. I just picked up a block and trans. It going to be some work, but I plan to have it done by FEB if everything goes as planned. I will be starting a thread when I get the block back from machining. Thanks for the bump! I heard you turned in your SR too. O well:cool: talk to you later!

Bye the way if anyone would like parts from the package deal please feel free to ask and i will shoot u a price.

just in case you guys didn't see the last post I am willing to split the package up:barf:

I went home for xmas so please bear with me until i get back after the first of the year.

bump bump bump

2 bump limit. You can start new thread in 3 days.