PDA

View Full Version : Extrude Honing - Recommendations


juggernaut1
12-08-2009, 05:26 PM
Howdy,

I'm looking for recommendations (and contact details) to have extrude honing done in the US. I am from Australia and the only place that does this process in Australia won't touch twin scroll exhaust housings because of their previous experience.

I plan on buying a housing from Full-Race and having it shipped directly to the said recommended shop. Its the 3071/76 .78 AR ex housing if that makes any difference. Geoff at full-race has emailed an extrude hone shop (not sure which one) on a few occassions on my behalf but they have not replied....so I have to go it alone.

Preferably, they should have experience with twin scroll housings given the comments from the local shop.

Cheers,

slider2828
12-09-2009, 10:53 AM
Look at the GT2871R thread.... codyace had has manifolds extrude, honed, and coated... He listed the shop in that thread... so check with him...

juggernaut1
12-09-2009, 04:43 PM
Thanks....I think that 2871R thread is the longest thread ever ...lol....ah well ...I've got christmas holidays.

mattsil80wis
12-09-2009, 07:56 PM
hey im good friends with cody ace and i built the same set up as him and im about 95% sure this is where we sent mine too

Kennametal Extrude Hone
Headquarters
235 Industry Blvd.
Irwin, PA 15642
USA
Get Map» (http://maps.google.com/maps?q=1%20Industry%20Blvd%20Irwin%2C%20PA&ll=40.171875%2C-80.02421657573767&spn=11.484375%2C14.397383441602784&hl=en)
T: 724 863 5900
T: 1 800 367 1109 Toll Free
T: 1 800 613 0983 Service
F: 724 863 8759
www.extrudehone.com (http://www.extrudehone.com/)

mattsil80wis
12-09-2009, 08:01 PM
Kennametal Extrude Hone
Contract Finishing Services
2882 North Ridge Drive
Grand Rapids, MI 49544
USA
Get Map» (http://maps.google.com/maps?q=2882+North+Rdg,+Grand+Rapids,+MI+49544&spn=22.830105,46.549072&iwloc=A&hl=en)
T: 616 647 9050
F: 616 647 9673
www.extrudehone.com (http://www.extrudehone.com/)

Kennametal Extrude Hone
Sales office
Jim Casteen
Western Regional Representative
9912 Chance Circle
Huntington Beach, CA 92646
USA
Get Map» (http://maps.google.com/maps?q=9912+Chance+Circle+Huntington+Beach,+CA&spn=10.851876,22.147339&iwloc=A&hl=en)
T: 714 222 6301
F: 714 968 8862
[email protected] ([email protected]?subject=Request%20Info rmation%20from%20ExtrudeHone.com)
www.extrudehone.com (http://www.extrudehone.com/)


Kennametal Extrude Hone
Contract Finishing Services
10663 Wolf Drive
Huntley, IL 60142
USA
Get Map» (http://maps.google.com/maps?q=10663+Wolf+Dr.+Huntley,+IL+60142&spn=23.125478,46.549072&iwloc=A&hl=en)
T: 847 669 5355
F: 847 669 3179
www.extrudehone.com (http://www.extrudehone.com/)

Kennametal Extrude Hone
Headquarters
235 Industry Blvd.
Irwin, PA 15642
USA
Get Map» (http://maps.google.com/maps?q=1%20Industry%20Blvd%20Irwin%2C%20PA&ll=40.171875%2C-80.02421657573767&spn=11.484375%2C14.397383441602784&hl=en)
T: 724 863 5900
T: 1 800 367 1109 Toll Free
T: 1 800 613 0983 Service
F: 724 863 8759
www.extrudehone.com (http://www.extrudehone.com/)


Kennametal Extrude Hone
Contract Finishing Services
50459 Central Industrial Dr.
Shelby Township, MI 48315
USA
Get Map» (http://maps.google.com/maps?q=2882+North+Rdg,+Grand+Rapids,+MI+49544&spn=22.824304,46.549072&iwloc=A&hl=en)
T: 586 997 6960
F: 586 997 6966
www.extrudehone.com (http://www.extrudehone.com/)


here is a list of all of them incase you cant get in touch with one of them

juggernaut1
12-09-2009, 08:30 PM
Thanks for all your help.

I've sent an email to them.

Cheers

mattsil80wis
12-10-2009, 09:20 AM
Thanks for all your help.

I've sent an email to them.

Cheers


you will be happy with the product...i know i was when i got my stock manifold done

you might wanna look into swain coating http://www.swaintech.com/

juggernaut1
12-10-2009, 05:29 PM
hey im good friends with cody ace and i built the same set up as him and im about 95% sure this is where we sent mine too

Kennametal Extrude Hone
Headquarters
235 Industry Blvd.
Irwin, PA 15642
USA
Get MapĀ» (http://maps.google.com/maps?q=1%20Industry%20Blvd%20Irwin%2C%20PA&ll=40.171875%2C-80.02421657573767&spn=11.484375%2C14.397383441602784&hl=en)
T: 724 863 5900
T: 1 800 367 1109 Toll Free
T: 1 800 613 0983 Service
F: 724 863 8759
www.extrudehone.com (http://www.extrudehone.com/)

Out of interest did you end up with the same hp result as Codyace given you replicated his setup?

mattsil80wis
12-10-2009, 06:22 PM
Out of interest did you end up with the same hp result as Codyace given you replicated his setup?

yeah i was only off a few hp but we think that was due to the freddy intake manifold that i used and the different gears that we have (4.40 vs 4.60) not that that would make a huge difference

juggernaut1
12-10-2009, 07:54 PM
Good to hear his killer setup could be replicated hp wise.

mattsil80wis
12-10-2009, 09:15 PM
Good to hear his killer setup could be replicated hp wise.

yeah it def is...he helped me with building the motor and all that other stuff so hes a good guy with a killer setup