WA2GOOD
12-07-2009, 04:40 AM
UPDATE - SR motor swap (tranny, motor, ECU, harness, MAF, ignitor) are sold, and rolling chassis is sold
the rest still pictured below are still available
I am putting my project car a '96 240sx (S-14) coupe up for sale. This car is perfectly straight, has never been wrecked and is now completely stripped down with all the interior removed and was in the process of being made into a track car. The car as it sits now is a stripped, straight, clean shell and I have a complete fresh (turbo, intake, everything, less than 20k miles) SR20DET motor (red top) with a manual transmission, ECU, wire harness, igniter, throttle body, MAF, etc ready to go in it.
I also have a lot of brand new racing suspension pieces like rear lower toe arms, steering rack ends, tie rod ends, front pillow tension rods, rear upper control arms, reinforced steering bushing kit, reinforced front stabilizer link kit, reinforced rear stabilizer link kit, sub-frame bushing collars, brand new large front mount intercooler kit, complete Nissan 350Z brakes- complete with pads, lines, rotors, and calipers (all four), and Corbeau Racing seats. I think all you would need to complete this project is a fuel cell, drive shaft, and radiator, along with some body parts & glass. All of which are found very cheap. as you all know.
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture092.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture103.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture108.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture060.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture061.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture062.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture063.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture064.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture065.jpg
This will make someone a perfect track/ drift/ race car project....
Although I was wanting to keep all this together, I will now consider parting out.
I will now part out, so call or e-mail me and ask about pricing on individual parts.
I can be reached by phone (619) 654-3585 or e-mail [email protected]
the rest still pictured below are still available
I am putting my project car a '96 240sx (S-14) coupe up for sale. This car is perfectly straight, has never been wrecked and is now completely stripped down with all the interior removed and was in the process of being made into a track car. The car as it sits now is a stripped, straight, clean shell and I have a complete fresh (turbo, intake, everything, less than 20k miles) SR20DET motor (red top) with a manual transmission, ECU, wire harness, igniter, throttle body, MAF, etc ready to go in it.
I also have a lot of brand new racing suspension pieces like rear lower toe arms, steering rack ends, tie rod ends, front pillow tension rods, rear upper control arms, reinforced steering bushing kit, reinforced front stabilizer link kit, reinforced rear stabilizer link kit, sub-frame bushing collars, brand new large front mount intercooler kit, complete Nissan 350Z brakes- complete with pads, lines, rotors, and calipers (all four), and Corbeau Racing seats. I think all you would need to complete this project is a fuel cell, drive shaft, and radiator, along with some body parts & glass. All of which are found very cheap. as you all know.
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture092.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture103.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture108.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture060.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture061.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture062.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture063.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture064.jpg
http://i8.photobucket.com/albums/a12/wa2good/parts/Picture065.jpg
This will make someone a perfect track/ drift/ race car project....
Although I was wanting to keep all this together, I will now consider parting out.
I will now part out, so call or e-mail me and ask about pricing on individual parts.
I can be reached by phone (619) 654-3585 or e-mail [email protected]