Parts Shop MAX ~High Mount Intercooler Kit~ Real time quotes and ordering in thread!

[DC Dan MAX USA]

*****UPDATE*****
We have a Greddy Intake Manifold cold pipe solution finalized
and it has been added to the shopping cart as an HMIC kit option!

http://www.gtfactory.jp/cms/e107_files/public/1271976228_5_FT4008_p1060372.jpg
http://www.gtfactory.jp/cms/e107_files/public/1271976228_5_FT4008_p1060351.jpg
http://www.gtfactory.jp/cms/e107_files/public/1271976228_5_FT4008_p1060357.jpg
http://www.gtfactory.jp/cms/e107_files/public/1271976228_5_FT4008_p1060354.jpg
http://www.gtfactory.jp/cms/e107_files/public/1271976228_5_FT4008_p1060361.jpg

PURCHASES AND SHIPPING QUOTES DIRECTLY FROM THIS THREAD!
SIMPLY CLICK THE BLUE ADD TO CART LINK

VIEW CART (http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=MAXUS)

We have been doing custom drift spec intercoolers for a long time with fantastic results:
http://www.worlddriftseries.com/jjtoydrive/25.jpg
NOW: Parts Shop MAX is proud to bring you the first drift specific bolt on high mount intercooler in kit for SR and KA-T with T25 & T28 Bottom mounted turbos. This complete track proven HMIC kit delivers turbo response and reduction in temps that is second to none.

MAX S13-S14 SR & KA High Mount Intercooler for T25 & T28 Turbos $380
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE (http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=MAXUS&ADD=HMKIT) in stock date is 4-23

Intercooler sold by itself for $250
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE (http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=MAXUS&ADD=HMIC) in stock date is 4-23

Key features of our drift specific High Mount Intercooler Kit:
~Mounts in front of the radiator, under the core support. Inlet and outlet shoot past the sides of the radiator.
~2.5"inlet and 2.75"outlet maintain proper velocity (3" pipes are too big for stock turbos)
~3.25" thick, extra wide core gives proper volume to the short height design
~Specifically designed for the bottom mount t25&t28 nissan turbos
~Extra short pipes for best response
~No BOV flange (we dont run them on our cars...TIG your choice of flange is optional)
~Allows better water cooling because it blocks less air from the radiator
~Mounts as far as possible away from front crash zone...and thieves...and cops
*Not compatible with pop up headlight motors and AC condenser
*Radiator support must be cut as shown in install photos

-Reinforced silicone couplers are available in Orange or Black.
S13 kit will have:
8x Stainless T-bolt clamps
2x 2.75" straight couplers
1x 2.5" straight coupler
1x 2"-2.5" step 90* coupler
http://www.gtfactory.jp/cms/e107_files/public/1248395669_2_FT4008_p1040952.jpg
S14 kit will have:
8x Stainless T-bolt clamps
2x 2.75" straight couplers
1x 2.5" straight coupler
1x 2"-2.5" step 45* coupler
http://www.gtfactory.jp/cms/e107_files/public/1248395670_2_FT4008_p1040953.jpg
http://www.gtfactory.jp/cms/e107_files/public/1248395670_2_FT4008_p1040956.jpg
http://www.gtfactory.jp/cms/e107_files/public/1248395670_2_FT4008_p1040957.jpg
http://www.gtfactory.jp/cms/e107_files/public/1248395670_2_FT4008_p1040958.jpg
http://www.gtfactory.jp/cms/e107_files/public/1248395670_2_FT4008_p1040959.jpg

MAX S14 High Mount Inter Cooler Kit $380
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE (http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=MAXUS&ADD=HMKIT) in stock date is 4-23

Intercooler sold by itself for $250
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE (http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=MAXUS&ADD=HMIC) in stock date is 4-23

http://www.gtfactory.jp/cms/e107_files/public/1250277431_2_FT4008_p1050143.jpg
http://www.gtfactory.jp/cms/e107_files/public/1250277431_2_FT4008_p1050148.jpg
http://www.gtfactory.jp/cms/e107_files/public/1250277431_2_FT4008_p1050153.jpg
http://www.gtfactory.jp/cms/e107_files/public/1250277431_2_FT4008_p1050154.jpg
http://www.gtfactory.jp/cms/e107_files/public/1250277431_2_FT4008_p1050155.jpg
http://www.gtfactory.jp/cms/e107_files/public/1250277431_2_FT4008_p1050151.jpg
http://www.gtfactory.jp/cms/e107_files/public/1250277431_2_FT4008_hybridhmic.jpg
Track tested, seeing dramatically lower water temps, and instant boost response!

MAX S13 High Mount Inter Cooler Kit $380
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE (http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=MAXUS&ADD=HMKIT) in stock date is 4-23

Intercooler sold by itself for $250
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE (http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=MAXUS&ADD=HMIC) in stock date is 4-23

Picture of the S13 complete kit:
http://www.gtfactory.jp/cms/e107_files/public/1254879406_2_FT4008_p1050530.jpg
http://www.gtfactory.jp/cms/e107_files/public/1254879407_2_FT4008_p1050533.jpg
installed
http://www.gtfactory.jp/cms/e107_files/public/1254359497_2_FT4008_p1050394.jpg
http://www.gtfactory.jp/cms/e107_files/public/1254359497_2_FT4008_p1050395.jpg
http://www.gtfactory.jp/cms/e107_files/public/1254359497_2_FT4008_p1050396.jpg
http://www.gtfactory.jp/cms/e107_files/public/1254359497_2_FT4008_p1050397.jpg
http://www.gtfactory.jp/cms/e107_files/public/1254359497_2_FT4008_p1050398.jpg
http://www.gtfactory.jp/cms/e107_files/public/1254359497_2_FT4008_p1050399.jpg
http://www.gtfactory.jp/cms/e107_files/public/1254359497_2_FT4008_p1050400.jpg
http://www.gtfactory.jp/cms/e107_files/public/1254359497_2_FT4008_p1050401.jpg
http://www.gtfactory.jp/cms/e107_files/public/1254359497_2_FT4008_p1050402.jpg
http://www.gtfactory.jp/cms/e107_files/public/1254359497_2_FT4008_p1050403.jpg

All intercooler kit options are available upon adding to cart for $380
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE (http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=MAXUS&ADD=HMKIT)in stock date is 4-23

Intercooler sold by itself for$250
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE (http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=MAXUS&ADD=HMIC) in stock date is 4-23

THE FOLLOWING ITEMS ARE SOLD SEPARATELY FROM THE HMIC KIT
(although they are a match made in heaven!)

I now have turbo inlets in stock for S15 T28 turbo ~ bottom mount ~ with Stock MAF or Z32 mass air flow meter Only $60!

Features:
~ 3 layer reinforced silicone couplers
~ Color choice of Black or Orange
~ Bead rolled Aluminum tube
~ Stainless steel hose clamps
~ Matches the Parts Shop MAX High Mount Intercooler (HMIC kit) perfectly!

Inlet pipe for T28 turbo with stock MAF available in black or orange: $60
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE (http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=MAXUS&ADD=IP28) in stock now!

http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060117.jpg
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060114.jpg

Inlet pipe for T28 Turbo with Z32 MAF available in black or orange: $60
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE (http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=MAXUS&ADD=IP28) in stock now!

http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060120.jpg
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060119.jpg
Install pictures
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060103.jpg
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060104.jpg
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060105.jpg
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060107.jpg
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060108.jpg
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060109.jpg

*****UPDATE*****

Inlet pipe for S13 T25 turbo is here !!!
Two versions are available, straight ($70) and curved ($80)
TIG welded and bead rolled aluminum tube with crank case breather fitting and 4 hose clamps
Comes with your choice of black or orange silicone couplers

Inlet pipe for T25 turbo with stock MAF available in black or orange and in two shapes: $70-$80
CLICK HERE TO ADD TO CART FOR AN INSTANT QUOTE OR TO ORDER ONLINE (http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=MAXUS&ADD=IP25) in stock now!

http://www.gtfactory.jp/cms/e107_files/public/1269301297_2_FT6184_p1060202.jpg
The curved tube is a little more expensive, and is designed to work with front mount intercooler pipe routing and curves around the OEM power steering reservoir rubber hose.
http://www.gtfactory.jp/cms/e107_files/public/1269301297_2_FT6184_p1060203.jpg
this version is a bit cleaner and a little cheaper than the bent aluminum tube inlet but requires our HMIC kit because the pipe routing of most FMIC kits interfere where this straight inlet puts the filter. Also the straight one requires you to lengthen the rubber hose on the bottom of the the power steering fluid reservoir.
http://www.gtfactory.jp/cms/e107_files/public/1269301297_2_FT6184_p1060204.jpg
installed pic on S13
http://www.gtfactory.jp/cms/e107_files/public/1269301297_2_FT6184_p1060187.jpg
get rid of all this crap!
http://www.gtfactory.jp/cms/e107_files/public/1269301297_2_FT6184_p1060182.jpg

VIEW CART (http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=MAXUS)

[Exas Spec D]

OMG, I want the HMIC!!! I shall buy... if I stay boosted.

[kafanylovesme]

Damn, Matt's angle in that picture is just awesome!

[zaquanh]

assuming s13 and s14 have different mount points which one would be for a s14 with a s13 sr20 ?

[DC Dan MAX USA]

There is 26 variations of this kit selectable in cart based on:
Coupler Color Preference,
Vehicle Body,
Engine and Turbo

It dont matter which "kit" you click on because they are all adjustable (once you are in the shopping cart) to your scenario

and 2 options of intercooler only - S13 or S14/15

[RurouniMidnight]

so i guess you got more 90 degree couplers back instock?

[DC Dan MAX USA]

not right now, but they will be here very soon

[RurouniMidnight]

cool ill be ordering soon then.

[jars14]

how much to weld on bov flange?

[DC Dan MAX USA]

$20 - send us the flange and we'll take care if it...
...although the kit does not come with any BOV port for a reason ~ you dont want to blow off while modulating the throttle for a drift. And they can leak. No one in this shop has ran a BOV for years now.

[jars14]

Does that ruin street manners?? Do you have to run a tune for it?? sorry this is just
philosophy Im unfamiliar with.

[Viet-Tam]

Will the cold pipe clear the radiator hose on a KA?

[DC Dan MAX USA]

Does that ruin street manners?? Do you have to run a tune for it?? sorry this is just
philosophy Im unfamiliar with.
It does not ruin anything, no retune, actually its better for the air/fuel because you are not letting any air escape that has already been metered for fuel by the MAF
Will the cold pipe clear the radiator hose on a KA?it touches the hose. (see customer pic)
http://bewbews.com/pictures/4/3576.jpg

[s14fbs]

would this work on a ka-t top mount setup with some adjusting ??

[DC Dan MAX USA]

yes, you would just reroute the hotpipe

[bkg775]

ok I am not trying to be dumb or flame in any kind of way because i have been in awe since you debuted your parts. i DD my car and slide it and I am Sr and I have a hks ssqv because I was told I need a BOV. wouldnt if I ran without a BOV everyday my lil t25 would blow and so my motor wouldn't like it either right?

[DC Dan MAX USA]

I have never experienced anyone blowing their turbo due to lack of BOV, you certainly dont need it for drift but if you feel better with one on there for your daily by all means add a flange and enjoy.

[zorak]

that picture is crazy.

[Magnum375 Jr.]

Hey Dan, I sent you another PM about purchasing this kit, like we were talking about, let me know what I need to do to send money and such.

[DC Dan MAX USA]

pms answered

[s-cargo]

what are the dimensions on the i.c.?

[DC Dan MAX USA]

the core is 688x190x86mm

[240rb20]

im assuming u can make this setup work on an rb20 swapped s13 with a little bit of custom piping???

[DC Dan MAX USA]

yes indeed

[DC Dan MAX USA]

were almost out of these, I have 3 left and then there will be a wait till the next shipment.

[s-cargo]

piping sold seperately??

[DC Dan MAX USA]

never planned on selling pipes alone since it is made specifically for our completely custom intercooler

[DisFrikkenWill]

woah, you could use this even with the bumper reinforcement bar? which one do you get if you have a s14 with a s13 sr20det?

[datboibrad]

didnt see any mention of it but will you guys be releasing a version to work with greddy intake manifolds?

[LayNLow]

woah, you could use this even with the bumper reinforcement bar? which one do you get if you have a s14 with a s13 sr20det?

Yes, you can use this kit with the front reinforcement bar. The i/c mounts right up against the radiator. Nowhere close to the crash bar.
And for your other question, Dan will have to answer that one.

[WTFaNG]

Can you just sell the intercooler alone? I don't need the piping

[DC Dan MAX USA]

woah, you could use this even with the bumper reinforcement bar? which one do you get if you have a s14 with a s13 sr20det?
yes!
There is 26 variations of this kit selectable in cart based on:
Coupler Color Preference,
Vehicle Body,
Engine and Turbo

It dont matter which "kit" you click on because they are all adjustable (once you are in the shopping cart) to your scenario
didnt see any mention of it but will you guys be releasing a version to work with greddy intake manifolds?
depends on if we get a car in the shop to fab pipes for the greddy,
in the mean time all greddy manifold users have been using S14 spec hot pipes and using the flexability of the couplers to make up the small difference.
Can you just sell the intercooler alone? I don't need the piping
yes sir $250+sh

[S13shaka]

on your website it says shipping for the intercooler kit is free

[Landers]

You still have an s13 kit in stock? Free shipping?

[papa]

do you still have s14 to s14sr kit's instock? shipped to 18902?

[ILoveMyRHS13]

We just installed this on our buddy's car. The boost response on this thing is RIDICULOUS.
http://i82.photobucket.com/albums/j259/RPS13Doug/Its%20Murda/DSCN0658.jpg

Extremely well made kit. Welds are superb, pipes are very light and fit very well.

[DC Dan MAX USA]

on your website it says shipping for the intercooler kit is free

You still have an s13 kit in stock? Free shipping?

do you still have s14 to s14sr kit's instock? shipped to 18902?
We are currently sold out of all intercooler stock.

The free shipping was an introductary special & will not carry over to the next batch.
We just installed this on our buddy's car. The boost response on this thing is RIDICULOUS.

Extremely well made kit. Welds are superb, pipes are very link and fit very well.
Thanks for the pic and review!

[slow_sr20]

sorry if this questions has been answered, but how much h.p. can these intercoolers support?

[chuy]

How much horsepower does the intercooler support

[papa]

alright thanks. any idea how far off the new ones are?

[cdvr-s13]

alright thanks. any idea how far off the new ones are?

I just called and the buddy told me 2 months. :-/

[DC Dan MAX USA]

sorry if this questions has been answered, but how much h.p. can these intercoolers support?

How much horsepower does the intercooler support
It has been answered before, more than enough power for the type of turbos this is designed for. I am currently waiting on a CFM spec if you would like a dead accurate number.

alright thanks. any idea how far off the new ones are?

I just called and the buddy told me 2 months. :-/
that is true

[s14_rob]

you guys taking pre-orders?

[DC Dan MAX USA]

yes sir thats no problem

[Black Guy]

Has anyone used this with a top mount set up?

[DC Dan MAX USA]

yes I had a few customers that did that

[cdvr-s13]

I didn't even realise I ordered one of these :smash:

until it showed up at my door yesterday :D

Seems to be a high quality kit, will post some pictures once I install it on my RHD 89 Silvia.

[jholman05]

Do you have a date on when these will be in? I should have just ordered it a long time ago, although I didnt know if I'd be able to salvage my car. Still looking to pick this up with the subframe riser bushings whenever both are back in stock.

[DC Dan MAX USA]

SFR is in stock 2-19 HMIC kits around the end of march. You can order at any time and we will ship when it has arrived.

THE FOLLOWING ITEMS ARE SOLD SEPARATELY FROM THE HMIC KIT
(although they are a match made in heaven!)

I now have turbo inlets in stock for S15 T28 turbo ~ bottom mount ~ with Stock MAF or Z32 mass air flow meter Only $60!

Features:
~ 3 layer reinforced silicone couplers
~ Color choice of Black or Orange
~ Bead rolled Aluminum tube
~ Stainless steel hose clamps
~ Matches the Parts Shop MAX High Mount Intercooler (HMIC kit) perfectly!

*I am now looking for a car with T25 turbo for development.

Inlet pipe for T28 turbo with stock MAF available in black or orange: https://www.paypal.com/en_US/i/btn/btn_cart_LG.gif (http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=MAXUS&ADD=IP28)
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060117.jpg
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060114.jpg
Inlet pipe for T28 Turbo with Z32 MAF available in black or orange: https://www.paypal.com/en_US/i/btn/btn_cart_LG.gif (http://secure.ultracart.com/cgi-bin/UCEditor?merchantId=MAXUS&ADD=IP28)
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060120.jpg
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060119.jpg
Install pictures
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060103.jpg
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060104.jpg
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060105.jpg
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060107.jpg
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060108.jpg
http://www.gtfactory.jp/cms/e107_files/public/1265942796_2_FT0_p1060109.jpg

[sncs14]

Just ordered the intake last week, but I may have to fab something up so I can drive it this week with a filter. Drove it a little while the other night without a intake filter(too lazy to make the one I had fit the MAFS), and the response is fantastic.

Took some pictures of the kit on my car after install...
http://img210.imageshack.us/img210/5748/dsc05213m.jpg
http://img10.imageshack.us/img10/1594/dsc05195m.jpg
http://img163.imageshack.us/img163/7160/dsc05214m.jpg

[DC Dan MAX USA]

Pipes look very stealth painted black, cant wait to see your clean setup with the proper inlet and filter.

[SWAT Team S14]

Hey Dan, anybody using these with an RB25? Obviously with the greddy intake, or do you think the throttle body is too close and angled the wrong way? I know it would be a tight fit, just thought I'd ask.
http://i232.photobucket.com/albums/ee111/nookiemastr/rb25det1.jpg

[modestmouse]

I know they're currently out of stock but I'd like a price on the intercooler without piping shipped to 29418 please

[DC Dan MAX USA]

Hey Dan, anybody using these with an RB25? Obviously with the greddy intake, or do you think the throttle body is too close and angled the wrong way? I know it would be a tight fit, just thought I'd ask.
no one yet
I know they're currently out of stock but I'd like a price on the intercooler without piping shipped to 29418 please
should be $281 shipped

[slideways2004]

Hey Dan, anybody using these with an RB25? Obviously with the greddy intake, or do you think the throttle body is too close and angled the wrong way? I know it would be a tight fit, just thought I'd ask.
http://i232.photobucket.com/albums/ee111/nookiemastr/rb25det1.jpg

that would be easy to do with pie cuts.

[Rb20detboy]

Hey how much shipped to 94566. I need an intercooler and piping for a 240sx with rb20det engine with stock turbo and throttle body. Have this? Thanks!

[drftwerks]

how about for Fc3s??? can i use the stock fan???


thanks
bryon

[90hatchie]

so u guys got none left for s13 with t28?

[frizzle]

Is the piping aluminum or steel?

[LayNLow]

The piping is aluminium. Dan, whats needed for a T28 upgrade? Just a 45 * coupler?

[florante rea]

anyone using this intercooler for a topmount setup? i wanna see pics, thank you. i have searched but just found one! either this or fullrace backdoor.

[twinspool]

anyone using this intercooler for a topmount setup? i wanna see pics, thank you. i have searched but just found one! either this or fullrace backdoor.

Be the second to use for top mount, seems like it would be as easy as flipping/turning the hot pipe around or cutting it to make it straight. Post some pics of it when you get it.

[twinspool]

Hey Dan, anybody using these with an RB25? Obviously with the greddy intake, or do you think the throttle body is too close and angled the wrong way? I know it would be a tight fit, just thought I'd ask.
http://i232.photobucket.com/albums/ee111/nookiemastr/rb25det1.jpg

Seems like it would be an easy fit with the existing piping you have on there now, just turn it or just find a nice curve in your existing piping to fit where its at.

[twinspool]

I wish I would have seen this before I had made my own end tank and piping..
http://i38.photobucket.com/albums/e105/uraskit/IMG00198.jpg

[CAPoweredS14]

+1 on possible RB25 with ISIS/Greddy intake mani.

I'd be interested if you got something.

[BigwaveSC]

The piping is aluminium. Dan, whats needed for a T28 upgrade? Just a 45 * coupler?

a shorter pipe and yes a 45.

Is the piping aluminum or steel?

Aluminum

so u guys got none left for s13 with t28?

None left in stock, should be in late April.

how about for Fc3s??? can i use the stock fan???


thanks
bryon

you can buy the intercooler by itself and then you make custom piping or if your local we can help you with this...

Hey how much shipped to 94566. I need an intercooler and piping for a 240sx with rb20det engine with stock turbo and throttle body. Have this? Thanks!

We dont make a kit for the RB20, sorry dude.
your gonna have to look at our kits we have and choose what is similar then customize it to fit your sretup.

check our pictures in the beginning of this thread.

[longfellow]

Do you guys have any cores in stock or is that also going to wait till late april?

I was planning on ordering an S14 core in 2 weeks and kinda was hoping to get it by the end or march or first week of april if thats possible.

[DC Dan MAX USA]

I dont really have the delivery date locked down on these yet, march or april - I'll post up when I know for sure.

Greddy manifold cold pipe is in the works.

Thanks to our local customer helping with the development!

http://www.gtfactory.jp/cms/e107_files/public/1267659314_2_FT4008_greddy13hmicpipe.jpg

[longfellow]

Cool thanks dude.

[Beams Levin]

I dont really have the delivery date locked down on these yet, march or april - I'll post up when I know for sure.

Greddy manifold cold pipe is in the works.

Thanks to our local customer helping with the development!

http://www.gtfactory.jp/cms/e107_files/public/1267659314_2_FT4008_greddy13hmicpipe.jpg
Damn thats exactly what I need how long before these are going to be for sale? Was going to just go with the S14 kit if it's close enough to fit/mod.

[tricky_ab]

Whoo I'm glad I decided to wait as I just picked up a Greddy manifold...Any ETA for it to be released?

[jholman05]

Damn it. I wish I would have just picked one of these up back when they were $380 shipped.... I just didn't know if my car was going to be back together or not. Hopefully you guys get these in March. I have stuff planned for april and I don't want to have to rig something to work while waiting on the hmic.

[tricky_ab]

I dont really have the delivery date locked down on these yet, march or april - I'll post up when I know for sure.

Greddy manifold cold pipe is in the works.

Thanks to our local customer helping with the development!

http://www.gtfactory.jp/cms/e107_files/public/1267659314_2_FT4008_greddy13hmicpipe.jpg

Any word on when the Greddy manifold cold pipe option will become available?

[IMPORTIMAGE]

holy steering angle

[DC Dan MAX USA]

end of april for sure on the intercoolers, greddy manifold cold pipe will be available as a piping configuration then too.

[tricky_ab]

Great to hear!...I'm going to shoot you a PM so that I don't flood this thread with questions...

[upsdude]

http://bewbews.com/pictures/4/3576.jpg

do you have any other pictures for the ka set up because from this angle it looks like the cold pipe is smushing the rad. hose a little.

[DC Dan MAX USA]

it does touch the KA rad hose

[upsdude]

ok that's fine, but does it pinch or constrict the hose in any way? cuz i reeeally want to get this for my ka-t build

[brokeAs240sx]

ok that's fine, but does it pinch or constrict the hose in any way? cuz i reeeally want to get this for my ka-t build

It pinches it - I had to mod the radiator hose (i.e. I put a water temp sensor adapter inline & reclocked it a bit). I'd say it's squeezing it down about 10-15% of normal circular size at the worse part.

I have bought a silicon radiator hose kit, which should make it less pinched.

However, as a note, I competed in several autox events before & after this mod & cooling is not affected by the pinching. I believe I wrote the review either somewhere in this thread or forum of how the overall temps went down from putting this hmic, removing the a/c, and some other small mods.

EDIT: fyi, if you are REALLY worried about it, just redo/custom the cold pipe. there's plenty of room, I just wanted a bolt-in solution w/o minimal/no extra customization outside what the SR guys are doing.

[upsdude]

cool thanks for the info :D

[DC Dan MAX USA]

thanks for the feedback brokeas,

I would say if someone with KA was worried about it, to get one of those universal radiator hoses from the auto parts store that can be bent in any direction (the one with the spring in it, and the ridges on the surface) before I would redo the cold pipe

[yingiang]

SHIT SICK.
Are these simple bolt in with no modification?
Currently running stock battery location and Z32 MAF on 95 240SX with S13 SR.

[DC Dan MAX USA]

if you see the OP install shots, you can see there is some cutting. stock battery and AC are a no go. Z32 MAF is compatible with our selection on inlet options sold separately.

[manureman]

can you guys add the flange for bov? or do we custom that ourselves?

[DC Dan MAX USA]

We can add it if you send the flange to us or you can do it yourself.

[Aoshi112]

what needs to be modified to make this HMIC kit work with A/C in my s14?

[jholman05]

I ordered mine a couple days ago... really hoping this get in on time and shipped out quickly. I need it for an event. I'll probably post some pictures once I get mine.

[frizzle]

Just put my order in today. I hope Im not to late for this next batch!

[DC Dan MAX USA]

I ordered mine a couple days ago... really hoping this get in on time and shipped out quickly. I need it for an event. I'll probably post some pictures once I get mine.

We will ship it as soon as we get them in.

Just put my order in today. I hope Im not to late for this next batch!

we have plenty to go around.:w00t:

[DC Dan MAX USA]

what needs to be modified to make this HMIC kit work with A/C in my s14?

Realistically, you should get the normal front mount kit if you want to run the AC, or else you are going to have to cut into your headlights, and thats not a good idea.

[s14_rob]

ETA on getting them in?

[slideways2004]

For those looking for a top mount turbo setup, here's some pics. I know its a different motor, but it gives you an idea.

http://i40.tinypic.com/68dlvm.jpg


http://i42.tinypic.com/xopg0x.jpg

[s14_rob]

ETA on getting them in?

ETA on getting them in

[Tenchuu]

since everyone was asking, i just ordered one. once i toss it all on i will post up pic of how it works with a RB25 and a greedy intake.

may be a bit though before i change over.

[upsdude]

Realistically, you should get the normal front mount kit if you want to run the AC, or else you are going to have to cut into your headlights, and thats not a good idea.

awww i didnt want to hear that:(

[DC Dan MAX USA]

ETA on getting them in?
they have already arrived in the USA and hopefully clears customs by the end of the week
For those looking for a top mount turbo setup, here's some pics. I know its a different motor, but it gives you an idea.
since everyone was asking, i just ordered one. once i toss it all on i will post up pic of how it works with a RB25 and a greedy intake.

may be a bit though before i change over.
thanks for sharing the info with the community guys!

*****UPDATE*****


We have a Greddy Intake Manifold cold pipe solution finalized and it has been added to the shopping cart as an HMIC kit option.

http://www.gtfactory.jp/cms/e107_files/public/1271976228_5_FT4008_p1060372.jpg
http://www.gtfactory.jp/cms/e107_files/public/1271976228_5_FT4008_p1060351.jpg
http://www.gtfactory.jp/cms/e107_files/public/1271976228_5_FT4008_p1060357.jpg
http://www.gtfactory.jp/cms/e107_files/public/1271976228_5_FT4008_p1060354.jpg
http://www.gtfactory.jp/cms/e107_files/public/1271976228_5_FT4008_p1060361.jpg

[frizzle]

Did these ship out yet?

[l2edken]

from what i asked today on the phone, they should be in customs by now.... call in a week he said

[DC Dan MAX USA]

Not clear of customs as of today. We will send tracking by email when they leave.

[jholman05]

So this does not clear the pop up headlight motors? I read that on the psm forum, in the HMIC thread, but haven't seen any mention of it in this thread. I think that should be mentioned in the original post.

If so that really sucks, I'm going to have to find a way to still be able to put my headlights up and down. Also looks like I wont get this in time to get it on for zdayz, so I'll be driving driving down on a charge pipe only setup.

[slow_sr20]

got my tracking number today......sooo stoked!!!

[RurouniMidnight]

Damn nice i was getting worried i hope i get mine as well asap, last piece of the puzzle to have my car ready for event in 2 weeks.

[HemiCharger]

sent you a pm. I have a/c but need a custom made cold pipe if you can do my man. I bought one of your 6 cobra downpipes.

[AngeloAJC]

i hope i get my tracking number soon i ordered mine last week

[frizzle]

i hope i get my tracking number soon i ordered mine last week
+1 I ordered mine 2 weeks ago.

[DC Dan MAX USA]

So this does not clear the pop up headlight motors? I read that on the psm forum, in the HMIC thread, but haven't seen any mention of it in this thread. I think that should be mentioned in the original post.

If so that really sucks, I'm going to have to find a way to still be able to put my headlights up and down. Also looks like I wont get this in time to get it on for zdayz, so I'll be driving driving down on a charge pipe only setup.
The install shots at the top of the first post show the motors are removed. Most people just weld brackets to keep them in the up position, but if you wanted them to be motorized by aftermarket means I would go with linear actuators.

http://www.gtfactory.jp/cms/e107_files/public/1271976228_5_FT4008_p1060361.jpg

We should finish shipping all pending orders today.

[DC Dan MAX USA]

Holy shit, sold out already - new orders from now on arrive in July.

[frizzle]

Did you ship mine out yet?

[frizzle]

Did you ship mine out yet?
Nevermind just got my tracking number. Thanks!

[RurouniMidnight]

i didn't get my tracking number yet, can you please reply to pm i sent yesterday, Thanks.

[AngeloAJC]

just got refunded my money because they didnt have enough in stock

[DC Dan MAX USA]

Justin, yours is out for delivery tomorrow, UPS tracking IM'd

[RurouniMidnight]

^Awsome thanks very much sir got me sweatin and stuff.

[Beams Levin]

I called about my tracking number for my order on wed. still havent received it.

[DC Dan MAX USA]

Your real name or your paypal email address would allow me to look this up.

Even if I had a city or state I could probably look it up, but south of the river exceeds my sherlock holmes prowess.

[Beams Levin]

Sorry about that pm sent

[DC Dan MAX USA]

tracking IM'd, I thought I heard dave Dave give it to you on the phone...
UPS Status: In Transit - On Time Scheduled Delivery Date:05/11/2010

[Tenchuu]

Got mine today. the tab was a little bent, but not like in the pics i saw. looks like the packing did good. thing looks great. and it will probably be a month or so before i have pics up of how a pipe for a RB25DET with a Greddy intake works.

[RurouniMidnight]

got my intercooler installed the other day after a little persuasion the fenders the way they are made it a little tight to slide in haha, def good stuff me likey.

http://www.axiomotion.com/files/26/Build thread/midmount%20front.JPG
http://www.axiomotion.com/files/26/Build thread/midmount%20intake.JPG
http://www.axiomotion.com/files/26/Build thread/midmount%20piping.JPG

[pinkarrowsnow]

ohh man i need one of these haha

[Corbic]

The install shots at the top of the first post show the motors are removed. Most people just weld brackets to keep them in the up position, but if you wanted them to be motorized by aftermarket means I would go with linear actuators.

http://www.gtfactory.jp/cms/e107_files/public/1271976228_5_FT4008_p1060361.jpg

We should finish shipping all pending orders today.

Considering all US S13s came with Pop Ups, and not everyone reads 5 pages threads to look for that one comment... I think this should be in bold on the very first post.

I would have not bought this kit had I known it was essentially not compatible with an S13.

[DC Dan MAX USA]

are you the guy who made McDonalds write "caution hot beverage" on their coffee cups?

OP modded with bold text.

[Corbic]

are you the guy who made McDonalds write "caution hot beverage" on their coffee cups?

OP modded with bold text.

No I'm the guy that called and has been very calm and patient and has not demanded his money back yet.

A friend recommended your company when I needed sub-frame bushings, I was very impressed with the quality after receiving them, being a nice guy I decided to go with the HMIC I saw on your page, I liked the idea of keeping my crash-beam, and I'm well aware of the practice of not running a BOV.

However, at no point did you state the conflict with the headlights, nor is there any clear photos of the interference, just photos of cars with the kit and no front end.

This seems like a great sense of gross negligence leaving that out as I stated, just about all US S13s are going to have pop-ups.

It's like Stillen selling the Roots S/C for the 350Z and never once mentioning the fact that you need an aftermarket hood.

[DJPimpFlex]

No I'm the guy that called and has been very calm and patient and has not demanded his money back yet.

A friend recommended your company when I needed sub-frame bushings, I was very impressed with the quality after receiving them, being a nice guy I decided to go with the HMIC I saw on your page, I liked the idea of keeping my crash-beam, and I'm well aware of the practice of not running a BOV.

However, at no point did you state the conflict with the headlights, nor is there any clear photos of the interference, just photos of cars with the kit and no front end.

This seems like a great sense of gross negligence leaving that out as I stated, just about all US S13s are going to have pop-ups.

It's like Stillen selling the Roots S/C for the 350Z and never once mentioning the fact that you need an aftermarket hood.

Hey if you don't want it I'll buy or trade you. PM sent.

[DC Dan MAX USA]

Calm and patient people contact me via IM. You are welcome to have your money back, just return the parts. There is other people waiting for this stuff. Your point was taken and the change was made so you can stop busting my balls now in my advertisers thread.

I have an 8 page thread dedicated to this subject on the Parts Shop MAX products forum which I created to post infinite details about our products so I dont want to hear anything about gross negligence.

As much as I love all of our wonderful customers on Zilvia, and try to post lengthly, useful and informative advertiser threads, Im not perfect & the center of the universe for information on our product will always be our website. For that you have my apologies.

[slideways2004]

No I'm the guy that called and has been very calm and patient and has not demanded his money back yet.

A friend recommended your company when I needed sub-frame bushings, I was very impressed with the quality after receiving them, being a nice guy I decided to go with the HMIC I saw on your page, I liked the idea of keeping my crash-beam, and I'm well aware of the practice of not running a BOV.

However, at no point did you state the conflict with the headlights, nor is there any clear photos of the interference, just photos of cars with the kit and no front end.

This seems like a great sense of gross negligence leaving that out as I stated, just about all US S13s are going to have pop-ups.

It's like Stillen selling the Roots S/C for the 350Z and never once mentioning the fact that you need an aftermarket hood.

All you had to do was open your hood and just "picture" where the intercooler would fit, you would figure out very quickly what all is in the way and what all you need to cut out. Even if none of his install pics show headlight motors, it has been listed and common sense would tell you that they dont fit with this intercooler

[jholman05]

Glad to see you updated the original post about the pop up headlighs. I didn't really think of it either, and usually I have a pretty good imagination for things like that. Anyway, I just got the kit, and I have pop ups and they go up and down now, I just have to do it manually. I have quite a few quality pictures I can add to this thread explaining my fairly simple solution. When I get some free time I'll load them to my photobucket and post them in here if that's fine with Dan.

[BigwaveSC]

Glad to see you updated the original post about the pop up headlighs. I didn't really think of it either, and usually I have a pretty good imagination for things like that. Anyway, I just got the kit, and I have pop ups and they go up and down now, I just have to do it manually. I have quite a few quality pictures I can add to this thread explaining my fairly simple solution. When I get some free time I'll load them to my photobucket and post them in here if that's fine with Dan.

That would be very cool of you.

[jholman05]

Here's a picture I loaded last night, I should find some time to load more tonight and do a brief writeup.

Obviously down.
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild008.jpg

[DC Dan MAX USA]

Its cool with me to post pics in here, its only going to help customers out so feel free!

NICE, are those turnbuckles?

[jholman05]

I kept the stock turnbuckle.


Sorry for all the pictures, I figure they can only help. This thread is lacking ka love anyhow.

All trimmed and painted.
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild004.jpg

Passenger side cut out
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild005.jpg

Driver side cut out
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild006.jpg

http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild017.jpg

Passenger side ic fitment
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild019.jpg
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild023.jpg

Driver side ic fitment
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild021.jpg
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild022.jpg

If you loosen the radiator hose clamps on the hot pipe and twist it just right, the radiator line hardly touches the cold pipe of the HMIC. Not too much or it'll start to kink.
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild024.jpg

No problems on the ka hotside. I'm running a GTI-R T28, but the inlet and outlet are in the s13 sr20 stock locations. So I ordered the kit for the T25.
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild025.jpg

As for the headlights, this may seem like a pain, but I am running short on time, before I drive it to zdayz and this is what I came up with on short notice. Like the other dude that posted in this thread, I wasn't crazy about having my headlights permanetly fixed up. The linear actuators are a possiblity, but with the short time period I'm running on it wasn't an option. Also linear actuators aren't cheap.

So, I decided I would make a slotted bracket, use a wing nut to quickly loosen, raise up and lock back into position.

This peice bolts to the stock headlight motor, we'll call it the headlight motor arm. I unbolted it, took a grinder and ground the back side of the pivot off, then took a punch and hammer and knocked it out.
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild012.jpg

I then took the pivot and welded a typical 1/4 20 bolt onto it, since wingnuts for that size are easy to find. I have a regular nut on here, since I didnt get to the store in time. Once it's welded, pop it back into the stock turnbuckle.
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild011.jpg

Next are the brackets I made, simple and crude. All I used was a vise (to bend), drill and grinder (to make the slots and cut the metal). I could provide the measurements on these if anyone wants them. This bolts into the core support brackets, next to the headlights, using the factory location up top and a factory hole in the bottom which I used a through bolt.
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild014.jpg

You can barely see them here.
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild026.jpg

Up
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild027.jpg

http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild028.jpg

Down
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild030.jpg

http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild038.jpg

http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild008.jpg

Not much clearance to the bumper, could easily be fixed if I made the bottom of the bracket 1/2" shorter. Other side has more clearance but they both work great.
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild047.jpg

There is just enough room for my normal sized hand to fit between the HMIC, Core support brackets and headlights to reach the wing nut, simply loosen, use the other hand to pull the headlight up, and tighten back down.
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild086.jpg

And that's just one way to keep your flip ups... just have to do it manually now :(
http://i159.photobucket.com/albums/t155/jholman05/100516-Rebuild067.jpg
Also, before I got my bumper painted I went ahead and cut the pignose fake vents out, figure it'll get more air to the IC this way, I'm not all that worried about the high pressure zone of the bumpers aerodynamics.

[DC Dan MAX USA]

Fantastic write up, I love how simple it is, thanks!

That has got to be the cleanest s13 engine bay I have ever seen in my life.

[DJPimpFlex]

I love that set up. Right now I do mine manually through the motors, I deleted all the wiring associated with them, so this is just better! I will do exactly the same once my IC kit comes in. Damn Japanese shipping...

[DC Dan MAX USA]

lots of customer installation shots on the original thread too

Here:

#/f/forced-induction/268945-parts-shop-max-high-mount-intercooler-kit-drift-spec-coming-very-soon.html

[D.Bo]

any way i can order jsut the cold pipe for a s14 greddy manifold?

[DC Dan MAX USA]

Just the hard pipe or couplers and clamps too? Zip code?

[projectslider]

dan u got pm !! !!!!!
let me know~!!!!!

[D.Bo]

Just the hard pipe or couplers and clamps too? Zip code?
just the pipe itself...shipped to 70131

[DC Dan MAX USA]

$75 shipped

[D.Bo]

$75 shipped


sweet just lmk how to order....dont see an add cart just for that item

[DC Dan MAX USA]

you can just go to www.paypal.com and send $ to [email protected], and write a note about what you are ordering in the message to recipient.

[D.Bo]

payment sent!

[DC Dan MAX USA]

thank you = )

[DJPimpFlex]

I keep seeing this pop up on my subscribed threads and I get all excited....Damn you guys lol. I want my intercooler!

[DC Dan MAX USA]

Its hard to believe anyone can have more anticipation than me, because we develop a lot of original parts so the wait time from prototype through production seems massive. I have to do all the paperwork each step through customs clearance, try to anticipate demand to stock stuff and make announcements etc, which results in spending a lot of time thinking about parts and wishing they were here already.

Sometimes I feel like the Steve Jobs of drifting. I should do a keynote speech, lol.

The latest update is these are finished at the factory. Ships out to us on Friday, arrives in USA warehouse next month which is when we can dispatch them to all of you guys waiting in line.

[DJPimpFlex]

I want mine before ASB! So sad.

[MrFairlady]

bump for updates - Would love to order one of these S13 Kits

price Shipped to N.C 28104

[kevo240]

I want to order a kit to when will you guys have them in stock again

[DJPimpFlex]

Piping is in, cores wont be in until early next month is what I hear.

[DC Dan MAX USA]

That's correct.

You get the price with shipping when you add to cart.
Half of this shipment is presold already.

[s13rookie]

Do you have any I/C kits for an Evo 8?

[nathanong87]

edit. whoa i double posted.

[DC Dan MAX USA]

Do you have any I/C kits for an Evo 8?

Nope, just the S13 and S14
bummer

[change]

these things getting close to being shipped out?

[DJPimpFlex]

Mine was shipped out yesterday! SO STOKED!

[DC Dan MAX USA]

Me 2 = )

We just shipped a buttload of intercooler kits for those of you waiting. Thanks for your patience! If you didnt get tracking by email already, feel free to contact us.