GTIR ITB sr20det ...

[mptjimmy]

i have a set of GTIR ITB's (fwd sr20det) can me modified to fit a rwd, asking $250.00 - with stock 444 top fed injectors no rail, SHIPPED

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs070.snc3/13748_190851787973_653477973_2943639_4426738_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs050.snc3/13748_190851797973_653477973_2943640_6369937_n.jpg

[sacco sideways]

if you modded them for a rwd then wouldnt you have to take the turbo off... uhh no thanks, but there cool on N/A cars. glws

[NMs14.5kouki]

if you modded them for a rwd then wouldnt you have to take the turbo off... uhh no thanks, but there cool on N/A cars. glws


uhh no you wouldnt have to, itb's+turbo=amazing response look into it.

[mptjimmy]

A stock rb26dett is a ITB setup, much better response even on a turbo application, but BIIIGG turbo + high booost = super large single throttle body, but a itb sr20det would be great, im selling because i was going to finish building my s15 motor sr20det in my s14 but selling the car to finish my sc300 1jzgte-vvti.....

[Prez]

buy modifying what do you mean like piping and wiring and hoses and such it should bolt right to head correct? or is it backwards?

[NMs14.5kouki]

A stock rb26dett is a ITB setup, much better response even on a turbo application, but BIIIGG turbo + high booost = super large single throttle body, but a itb sr20det would be great, im selling because i was going to finish building my s15 motor sr20det in my s14 but selling the car to finish my sc300 1jzgte-vvti.....

actually as far as i know these would help out a ton more on the bigger turbos running high boost, giving you better spool, but should maintain the top end power, maybe not as much top end as a large tb.

buy modifying what do you mean like piping and wiring and hoses and such it should bolt right to head correct? or is it backwards?


you have to flip the actual plenum its facing the firewall on rwd cars, and the flange is different, i think you can just re-drill holes for it but i am not sure. its a decent amount of work and 100% worth it.

[blu808]

Badass setup for an sr with pretty much any turbo. I have modded a few of these to work on rwd sr. Takes a couple hours of cutting and welding.

[mptjimmy]

redrilling the lower intake manifold bolts 6 mm over to the right, tops line up, very simple with a intake manifold gasket, you use it as a template and done... then cut and reverse the intake to the front, and idealy reweld a 3" intake , its been done,

http://i91.photobucket.com/albums/k308/debonedquail/poolC_00097.jpg

http://i91.photobucket.com/albums/k308/debonedquail/lSC_01143.jpg

[Prez]

seems like alot of work espically since i rock a t25... not even worth it(though i wonder how it would respond)....it would be on a T28/similar... bigger i'd go Greddy.... GLWS i would if i didnt need new coils... free bump
btw that setup looks dirty...!!

[Campos]

that exhaust manifold is sick, any idea of the make of it?

[mptjimmy]

http://ep.yimg.com/ca/I/phase2motorsports_2079_282288195

[Prez]

I like that setup, yours? do you run a water to air? or did you clock turbo other way?

[ProjectPanda13]

Interested in the manifold....

[datboibrad]

whats the deal with that valve cover?

[mptjimmy]

i wish it were but my valvcovers PINK, thats a pix i came across its from phase2motors , that valve cover might be a fwd valve cover or ve valve cover for the better oil seperation chamber like the s14 valve covers,

http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs004.snc3/11135_172993562973_653477973_2819555_2893389_n.jpg

[Prez]

oooooh.... makes sense... either way your bay is clean too

[hkspwrsr]

I'm interested in the itb's was wondering if you could ship them to Orlando fl 32812 pm me the price for shipping and a way of contacting you

[smelly240]

i have a set of itbs already flipped and modded/ported for a rwd s13 sr if anyone wants to see how its done...

heres the dyno sheet from 93oct.
http://i132.photobucket.com/albums/q19/smelly240/DSCN0567.jpg

[mptjimmy]

bump still availiable, thanks will ship in the US for $250.00