PDA

View Full Version : Question. SR20 S14 into Nissan Pick-UP

Mag001
11-25-2009, 02:54 PM
Hi! im not a nissan expert but i got this 1994 Nissan Pick-up turck with an original k24 motor and a manuel tranny.

My question:

Does the SR20 (S14) fit bolt on , on the original k24 tranny?

The reason why i am asking this is that i would like to keep my tranny for the 4 wheel drive ;).

thanks to whom can answer my question! :l101:
tylerbretts13
11-25-2009, 03:13 PM
nope, you need a sr tranny.
slider2828
11-25-2009, 03:45 PM
You just need to change the bell housing. Internally its the same. So yes/kinda... There are threads that talk about how to do this.
Mag001
11-25-2009, 05:30 PM
You just need to change the bell housing. Internally its the same. So yes/kinda... There are threads that talk about how to do this.


I was looking at some pictures of SR trannies and mine, theres like to bedhousing to the tranny, theres the front part that covers the clutch and that hooks on to the engine, and theres the part where the shifter is.. Im thinking that maybe i could just instal the front part, is that what you are saying??
projectRDM
11-25-2009, 07:21 PM
The 4WD model has a different manual gearbox, but the bellhousing should just swap over, yes.
Mag001
11-26-2009, 06:31 PM
The 4WD model has a different manual gearbox, but the bellhousing should just swap over, yes.


Allright! are you sure that it will fit? i don't feel like buying a complete swap and to my surprise,find out it does noy fitt! and my other question..

"why isnt there more nissan pickup trucks with an SR20 swap!"
HemiCharger
11-26-2009, 06:39 PM
Allright! are you sure that it will fit? i don't feel like buying a complete swap and to my surprise,find out it does noy fitt! and my other question..

"why isnt there more nissan pickup trucks with an SR20 swap!"


that would be insane --- I had a supercharged frontier

they are nice -- I could only imagine what an sr20 powered hardbody would be -- that is cool...
Mag001
11-26-2009, 07:02 PM
that would be insane --- I had a supercharged frontier

they are nice -- I could only imagine what an sr20 powered hardbody would be -- that is cool...

;) hell yea! 300 hp with a blow off sound when passing by a hardbody pickup truck :P hehe

But its all a dream for now.. i have to be sure that the bellhousing will fitt on my tranny!
projectRDM
11-26-2009, 08:41 PM
Allright! are you sure that it will fit? i don't feel like buying a complete swap and to my surprise,find out it does noy fitt! and my other question..

"why isnt there more nissan pickup trucks with an SR20 swap!"

*Should*

I've never torn one down. I've seen a few SRs in trucks, but they were always 2WD.

Compare a 4WD unit to the 2WD, if the bellhousing is the same between the two then I don't see why it wouldn't work.