Log in

View Full Version : reverse lamps don't work. S14


VNG704
11-25-2009, 10:52 AM
1997 with s13 sr. My reverse lamps don't work. I don't see a fuse for "reverse lamps" if there is any. The bulbs look perfectly fine. The bulb connectors look fine and connected securely. Not sure where to look next. T.I.A.

update: Yea, it was the wire to the reverse lamp switch, thanks.

mekaw
11-25-2009, 11:01 AM
when that happened to me, it was my reverse gear sensor or w/e, its located on your tranny with a plug. wire snapped off due to rubbing

VNG704
11-25-2009, 11:07 AM
when that happened to me, it was my reverse gear sensor or w/e, its located on your tranny with a plug. wire snapped off due to rubbing
Cool, thanks for the quick reply. Will check for a reverse sensor on the trans and update.

projectRDM
11-25-2009, 11:11 AM
2pin plug, wire colors are green/white and green on the chassis side. It's the same fuse as the gauge cluster, so as long as the cluster is good the switch is either bad or unplugged.

g6civcx
11-25-2009, 12:11 PM
S14 with S13 SR. Has the reverse lamps ever worked?