lol_1337
11-23-2009, 10:11 PM
Up for sale is the following (pink slip in hand):
RB20DET inside of a 1989 240sx Hatch Back :
70k on motor
177k on chassis (has terrible dents on the sides and the passenger door handle doesn't work [that ones an easy fix, just the dents aren't because its in the rear panel unless you want to sand it down and primer that shit]).
Needs to be done(all very cheap [because I have the parts] yet somewhat annoying and time consuming [because I don't have the time]):
Reconnect fuel lines from fuel pump assembly
Reconnect FPR
Flush the Radiator
*Note* : These three things "don't" need to be done to get the car running. It just the pain-in-the-ass things I decided would be too much of a pain-in-the-ass to do so I just didn't do them at the time.
Take springs off of old kybs and put them in rear shocks [all you need is a spring compressor <-- i know rite]
Replace tension rod bushings (getting a little old) [I have replacement rods]
Replace 4 lug hubs (One of the lugs came off for each of the rear wheels so each of those are on 3 lugs) [I have replacement hubs - and I really REALLY don't want to raise my car on the jacks I have now. I get weekends off and I don't want to spend time on a car I'm going to have to get rid of anyway]
Attach Downpipe + exhaust ( Two choices : Downpipe to the stock 240 exhaust I have, or cut/weld downpipe to a 3 inch exhaust I have... [when I drove it, I just put the stock 240 exhaust on the downpipe..] I cannot explain to you the multitudes of how much of a pain-in-the-ass it will be to cut and weld this shit)
Some political shit that needs to be done :
Registration (It's on non-op)
Smog check (haha!!)
You tow it away and you get it for $2,000. Hell, I don't care if you do all that stuff at my garage to get it running, and drive it out there (though it'll take hours), just don't try to low ball me, I don't have time for it. It will be $2,000. It'll have to be between Thursday ~ Saturday.
Oh wait I should probably list this :
I need it gone ASAP. I need the room! The garage space. If it's not gone by this weekend I'll probably scrap it so just throwing this out there. I have three cars right now and one is being paid off. I hate taxes. And really have no time to work on this, so - grab it gents.
By the way, I'll probably never check this site because of the lack of time to remember the damn password or reset it or w/e so just email me responses and shiet.
[email protected]
Located near highland park, CA
RB20DET inside of a 1989 240sx Hatch Back :
70k on motor
177k on chassis (has terrible dents on the sides and the passenger door handle doesn't work [that ones an easy fix, just the dents aren't because its in the rear panel unless you want to sand it down and primer that shit]).
Needs to be done(all very cheap [because I have the parts] yet somewhat annoying and time consuming [because I don't have the time]):
Reconnect fuel lines from fuel pump assembly
Reconnect FPR
Flush the Radiator
*Note* : These three things "don't" need to be done to get the car running. It just the pain-in-the-ass things I decided would be too much of a pain-in-the-ass to do so I just didn't do them at the time.
Take springs off of old kybs and put them in rear shocks [all you need is a spring compressor <-- i know rite]
Replace tension rod bushings (getting a little old) [I have replacement rods]
Replace 4 lug hubs (One of the lugs came off for each of the rear wheels so each of those are on 3 lugs) [I have replacement hubs - and I really REALLY don't want to raise my car on the jacks I have now. I get weekends off and I don't want to spend time on a car I'm going to have to get rid of anyway]
Attach Downpipe + exhaust ( Two choices : Downpipe to the stock 240 exhaust I have, or cut/weld downpipe to a 3 inch exhaust I have... [when I drove it, I just put the stock 240 exhaust on the downpipe..] I cannot explain to you the multitudes of how much of a pain-in-the-ass it will be to cut and weld this shit)
Some political shit that needs to be done :
Registration (It's on non-op)
Smog check (haha!!)
You tow it away and you get it for $2,000. Hell, I don't care if you do all that stuff at my garage to get it running, and drive it out there (though it'll take hours), just don't try to low ball me, I don't have time for it. It will be $2,000. It'll have to be between Thursday ~ Saturday.
Oh wait I should probably list this :
I need it gone ASAP. I need the room! The garage space. If it's not gone by this weekend I'll probably scrap it so just throwing this out there. I have three cars right now and one is being paid off. I hate taxes. And really have no time to work on this, so - grab it gents.
By the way, I'll probably never check this site because of the lack of time to remember the damn password or reset it or w/e so just email me responses and shiet.
[email protected]
Located near highland park, CA