tokarzni
11-23-2009, 09:31 AM
Hello,
I recently sold my S13 and so have no need for these parts anymore. I'd planned on using them on my SR but the new owner did not want to pay for them. All prices below include shipping from Columbus, Ohio. You can either PM me with questions or toss me an email at: [email protected] My paypal ID is also [email protected] Thanks -Nick
Greddy Intake for SR20DET that allows you to use the Z32 300ZX MAF: $100/shipped
(note: does not include filter or MAF)
http://farm3.static.flickr.com/2745/4127644851_f895bc67c9.jpg
http://farm3.static.flickr.com/2640/4128415982_1532806734.jpg
TEIN EDFC (Electronic Damper Force Controller): $200/shipped
(note: was purchased used with my coilovers and appears used but good shape. I powered up the unit and it looks to be in working order. The case has been opened as seen in the pictures. This voids the warranty.)
http://farm3.static.flickr.com/2786/4127644555_e44d659829.jpg
http://farm3.static.flickr.com/2751/4127644639_cbcfa80b68.jpg
http://farm3.static.flickr.com/2637/4128416306_5147903132.jpg
http://farm3.static.flickr.com/2721/4127644351_438023c60c.jpg
OEM Nissan CWT (Coolant Water Temp Sensor): $20/shipped
(note: was purchased for my SR20 but did not need. This sensor is brand new and still in the original packaging. Part#: 22630-51E02
http://farm3.static.flickr.com/2586/4127644431_9b3409ae64.jpg
Nismo FPR(Fuel Pressure Regulator): $100/shipped
(note: was purchased for my redtop SR20 but never installed. The manual comes with it as well. Brand new part, never used. Details: Fully adjustable Nismo Type A FPR with a range from 28.4 - 85.2 psi.
http://farm3.static.flickr.com/2546/4127644591_7553ccb888.jpg
S13/S14 --> Z32 Front Stainless Steel conversion Brake Lines: $20/shipped.
(note: One of the lines has a broken grommet. See pics below for details. This fitting could easily be repaired by a local shop. Not sure of the brand.)
http://farm3.static.flickr.com/2603/4127644479_23898df0fb.jpg
http://farm3.static.flickr.com/2714/4128416108_04ed334779.jpg
OEM Front and Rear Suspension Pieces for S13: $50/shipped
(note: I removed these from my S13 only to upgrade to SPC performance fully adjustable pieces. These OEM links have been repainted grey and all of them have Poly Bushings pressed in place.)
Rear Links:
http://farm3.static.flickr.com/2603/3916239050_0106ccdb18.jpg
Front Links:
http://farm3.static.flickr.com/2607/4035412514_c06417cebe.jpg
OEM S13 4-lug hubs: $50/shipped
(Note: removed when doing the 5-lug conversion. Have roughly 100k miles on them. The price is high just because of shipping but willing to negotiate. Get them out of my garage!!!)
http://farm3.static.flickr.com/2646/3915463551_28ef413850.jpg
Used S13 OEM Ebrake Lines: $20/shipped
(Note: I removed these when doing the Z32 swap. Good working condition)
http://farm3.static.flickr.com/2441/3915460615_103749f28b.jpg
I recently sold my S13 and so have no need for these parts anymore. I'd planned on using them on my SR but the new owner did not want to pay for them. All prices below include shipping from Columbus, Ohio. You can either PM me with questions or toss me an email at: [email protected] My paypal ID is also [email protected] Thanks -Nick
Greddy Intake for SR20DET that allows you to use the Z32 300ZX MAF: $100/shipped
(note: does not include filter or MAF)
http://farm3.static.flickr.com/2745/4127644851_f895bc67c9.jpg
http://farm3.static.flickr.com/2640/4128415982_1532806734.jpg
TEIN EDFC (Electronic Damper Force Controller): $200/shipped
(note: was purchased used with my coilovers and appears used but good shape. I powered up the unit and it looks to be in working order. The case has been opened as seen in the pictures. This voids the warranty.)
http://farm3.static.flickr.com/2786/4127644555_e44d659829.jpg
http://farm3.static.flickr.com/2751/4127644639_cbcfa80b68.jpg
http://farm3.static.flickr.com/2637/4128416306_5147903132.jpg
http://farm3.static.flickr.com/2721/4127644351_438023c60c.jpg
OEM Nissan CWT (Coolant Water Temp Sensor): $20/shipped
(note: was purchased for my SR20 but did not need. This sensor is brand new and still in the original packaging. Part#: 22630-51E02
http://farm3.static.flickr.com/2586/4127644431_9b3409ae64.jpg
Nismo FPR(Fuel Pressure Regulator): $100/shipped
(note: was purchased for my redtop SR20 but never installed. The manual comes with it as well. Brand new part, never used. Details: Fully adjustable Nismo Type A FPR with a range from 28.4 - 85.2 psi.
http://farm3.static.flickr.com/2546/4127644591_7553ccb888.jpg
S13/S14 --> Z32 Front Stainless Steel conversion Brake Lines: $20/shipped.
(note: One of the lines has a broken grommet. See pics below for details. This fitting could easily be repaired by a local shop. Not sure of the brand.)
http://farm3.static.flickr.com/2603/4127644479_23898df0fb.jpg
http://farm3.static.flickr.com/2714/4128416108_04ed334779.jpg
OEM Front and Rear Suspension Pieces for S13: $50/shipped
(note: I removed these from my S13 only to upgrade to SPC performance fully adjustable pieces. These OEM links have been repainted grey and all of them have Poly Bushings pressed in place.)
Rear Links:
http://farm3.static.flickr.com/2603/3916239050_0106ccdb18.jpg
Front Links:
http://farm3.static.flickr.com/2607/4035412514_c06417cebe.jpg
OEM S13 4-lug hubs: $50/shipped
(Note: removed when doing the 5-lug conversion. Have roughly 100k miles on them. The price is high just because of shipping but willing to negotiate. Get them out of my garage!!!)
http://farm3.static.flickr.com/2646/3915463551_28ef413850.jpg
Used S13 OEM Ebrake Lines: $20/shipped
(Note: I removed these when doing the Z32 swap. Good working condition)
http://farm3.static.flickr.com/2441/3915460615_103749f28b.jpg