PDA

View Full Version : OR FS New Brembo Calipers

strawe510
11-20-2009, 10:08 PM
Up for sale is a set of two Sentra spec-v OEM front brake calipers loaded with pins, shims and pads. My loss your gain. I have sold the project and now no need for them.

Price 400 bucks shipped in the lower 48.

New price 380 shipped.
Paypal only please.

Located in Corvallis, Oregon

http://i194.photobucket.com/albums/z187/strawe510/Wheel%20Whore/brembo4.jpg
http://i194.photobucket.com/albums/z187/strawe510/Wheel%20Whore/brembo3.jpg
http://i194.photobucket.com/albums/z187/strawe510/Wheel%20Whore/brembo2.jpg
http://i194.photobucket.com/albums/z187/strawe510/Wheel%20Whore/brembo1.jpg
1RPS13toEnvY
11-21-2009, 03:16 PM
will this bolt up to my S13?
Slammed180
11-21-2009, 03:59 PM
yes.......
besTint
11-21-2009, 04:33 PM
so these fit with no modifications? what rotors do you have to use for 5lug s14?
DreamN
11-21-2009, 06:16 PM
They install with no modification. They bolt right on. Use 300ZX coversion lines. Use sentra spec-v rotors. I believe they're 296x22 and come in 4x114.3 bolt pattern so just have them drilled for 5x114.3 as well.
tahms350z
11-21-2009, 08:31 PM
I wonder how different those would be from oem 350z Brembos?
strawe510
11-21-2009, 10:54 PM
The main difference I know of is the Rotor thickness. The sentra rotor is a 23mm thick and the 350z is a 30 or a 32mm.

I have never held a 350z in my hands next to these.
robfis
11-22-2009, 05:46 PM
will these fit on a s14? i already have the z32 front rotors and quick bleed break lines. please let me know. thanks
strawe510
11-22-2009, 07:41 PM
I know they will bolt up to a s14 as they are the same bolt pattern as a z32. I have now idea what rotor to use. earlier in the thread guys talked about a stock sentra spec-v rotor working but I don't know. I was planning on using them instead of my z32 calipers for a 510 but have decided to sell the car and don't need them anymore. I bought them from Nissan about 6 months ago and this was the last set of loaded ones they had. They are going to be selling them as bare calipers from now on with no pin, pads or shims. As well as they are not cheap to begin with.
strawe510
11-24-2009, 03:36 PM
Bump you get both calipers for this price crazy cheap. Or you could say a very good price.
strawe510
11-26-2009, 05:07 PM
New Price 380 shipped.
D.Adams
11-26-2009, 05:28 PM
will they work on my s13 with drilled and sloted rotors .. if they are a direct bolt up i will by them
MrMcgarrett
11-26-2009, 06:49 PM
You need the Sentra rotors to bolt them on.
If you are 4 lug they will bolt right on.
If you are 5 lug you need to redrill the rotors.
They will not work with Z32 rotors or stock S13/S14 rotors.
They also will work with the stock brake lines(Banjo bolt).
strawe510
11-29-2009, 08:34 PM
someone must need these.
strawe510
12-02-2009, 09:21 PM
I have decided to put these up on ebay so please close thread and if someone would like these look for them on ebay.

Thanks