s13 gauge cluster wiring problem

[SilviaAura]

hey guys i just did my sr redtop into a 1990 sngle cam shell...i wired everything up and it works perfect...but when i put in my sr gauge cluster in it still doesn't show my revs or speed or nothing...not even the clock works now...the lights do light up but they flash...i did rewire the harness to the ecu as show in frsports.com...i've tried many things but still can't get it to work...but it does all shoe up fine on my avcr boost controller...what have i done wrong? pls help with anything you can help me with... much apriciated guys thx

[SilviaAura]

need help guys...

[theslows13]

bad cluster?

why did you put an JDM cluster in, when your oem one would have worked fine, sans the tach without a little modding?

[SilviaAura]

it all worked fine b4 though...my oem single cam one would work??? what needs to be done to make it work?

[Rancimo322]

hey im having somewhat the same problem in my 90 s13 but i swaped the cluster for the jdm it lights up but my spd/od and temp dont work? how do i fix this ?

[maverickmotorsports]

did you guys wire in the "dash" plug by the ecu?

[Rancimo322]

yeah i took out the whole dash (witch was a bitch to do!) and repluged it all back in with the jdm cluster. but like i said it all lights up and work excepte for the od/spd and temp? found it weird that the temp didnt work either, since i took the radiator out.? oh side question when i repluged i left out the cruise . dose it need to be ? do i need it all together ? is it a must or can i just disconnect it al together ?

[maverickmotorsports]

check your fuses. there is a 10A fuse that is used for gauges, time, and a few other random things.

[jontron5000]

I hear that you need a tach driver/ tach adaptor to make your tach work after an SR swap if the original car was a single cam.

Also, you will need a dual cam speed sensor (doesn't matter from what engine I believe)

From what I've read after doing all that everything should work

Feel free to correct me if I'm wrong.