PDA

View Full Version : AL 91 S13 Hatch LS6 423whp


cpl dozier
11-19-2009, 02:44 PM
Ok, so I need a daily driver that does not use so much gas. I have a job that requires a bunch of driving around town. I am willing to trade so just shoot me an offer. Also am not sure on price yet. Will start out the price at 12k obo.
Car is very strong and reliable...It's a chevy now.




Engine:
Motor has around 80,000 miles on it
Trans and clutch, flywheel around 200 miles
LS1 block
LS6 intake manifold
LS6 heads ported / polished
Titanium retainers
Crane springs
Crane valves 205/157
Hardened pushrods
Comp cam custom grind 232/236-542/545 Lobe seperation 113
Ported LS2 oil pump
LS2 front sump oil pan
Ported Throttle body
MAF no screen
34lb injectors
Custom 1-3/8th headers
Dynomax bullet mufflers
Custom mild steel coolant piping, no hoses
High torque starter
Steel braided high pressure power steering line
Billet steel cnc's solid motor mounts
Custom subframe crossmember for motor
Custom transmission mount
Pro 5.0 shifter and short stick with Hurst leather shifter knob
Built T-56 6-speed transmission from Tick Performance for 700hp
One piece steel drive shaft
Tomei Technical Traxx 2-way LSD
Koyo aluminum radiator
Electric fan wired to switch inside car
160 degree thermostat to keep it cool
Spec 3+ clutch and billet steel flywheel
Steel braided slave cylinder line and custom slave cylinder with mounting
CNC's custom factory sway bar spacers to clear oil pan
Walboro 255 fuel pump
Spliced wire harness to make it all work
Tuned by Henson Performance on a Dynocom 423whp and 423tq, which is roughly 450 on a dynojet.

Suspension:
KYB adjustable shocks
Tein springs
TC Sportline ruca's
TC Sportline traction rods
TC Sportline upper toe adjustors
TC Sportline lower toe adjustors
Polyurethane subframe bushing kit


Exterior:
Sleepy eye conversion
Origin body kit with clear front square markers
Painted over center garnish on rear
Rattle can flat black currently..However the car is getting painted Metallic Dark Purple next week.
Will be repainting shortly with spray gun either gloss black or flat again. if someone wants to paint something else, I can drop the price to cover painting yourself.

Lighting:
8000k HID kit installed
LED tag light
LED front amber markers

Brakes/wheels:
5 Zigen FNO1RC wheels gloss black with silver lip
Front 17x8.5 5x114.3
Rear 17x9.5 5x114.3
One of the front wheels has a little wobble to it. Can be repaired. Not bad.
Steel braided brake lines
Front brakes: 350z Track edition slotted rotors and Z32 calipers
Rear brakes: Z32 rotors and calipers

Interior:
Currently is partial brown interior in car. Complete interior swap will be completed next week for black interior almost flawless with one crack in dash. S14 seats up front and factory rear seat.
I started installing aftermarket gauges because I had them laying around. So far I have a tach with shift light that works, voltage, oil pressure, and coolant temp. Speedometer can be hooked up by purchasing a dakota digital converter box. I just don't feel the need to spend the 80 bucks on it right now.
No radio or speakers, but will install once the interior gets put back in.
Heater works
No A/C lines or compressor. Just blows air.
Keyless entry installed with alarm system. The alarm has been disabled to only allow the keyless entry to work. It was annoying. I will know if someone tries to steal it. It is loud. Ha ha.


Dyno time...Pull made in fourth gear. It is in 3rd when the film starts. He gets out of the car with it rolling.
http://www.youtube.com/watch?v=9y3jqRMCp08 (http://[URL]http://www.youtube.com/watch?v=9y3jqRMCp08)


First start up with exterior and interior shots. Shifter is a joke, just for fun. Now is leather with short shifter.
http://s19.photobucket.com/albums/b174/dozier1/?action=view&current=Picture-2.flv (http://[URL]http://s19.photobucket.com/albums/b174/dozier1/?action=view&current=Picture-2.flv)

In the pictures below, the bumper was not attached yet. It was just sitting on the frame.

http://i19.photobucket.com/albums/b174/dozier1/Picture001-3.jpg
http://i19.photobucket.com/albums/b174/dozier1/Picture002-3.jpg
http://i19.photobucket.com/albums/b174/dozier1/Picture003-1.jpg
http://i19.photobucket.com/albums/b174/dozier1/Picture004-1.jpg

Team DET
11-19-2009, 02:52 PM
sound sick :wackit: GLWS ...

blkmrkt
11-19-2009, 08:11 PM
trade for a e36 m3?

cpl dozier
11-19-2009, 11:11 PM
Too old for me...Don't like that body style...Thanks though.

cpl dozier
11-21-2009, 04:47 AM
Too the top...

Graeter
11-22-2009, 04:03 PM
You have a PM sir!

jiggysnitz
11-22-2009, 04:13 PM
trade for an sr S14?

cpl dozier
11-23-2009, 10:03 AM
Pm replied...Please send info on S14...Thanks.

crono72000
11-24-2009, 08:18 AM
Pm sent
get back to me.

Thanks !

rb20hatch
11-24-2009, 09:08 AM
Still want to trade for 2jzgte sc300

cpl dozier
11-24-2009, 08:18 PM
RB20hatch...You did send me a few pics. But not really in detail. Send me more pics and full mod list done to the car.

Crono, pm sent...Thanks for the interest.

cpl dozier
12-04-2009, 08:29 AM
Bump to the top.

RB24_S14
12-04-2009, 09:49 AM
I bet if you give it a good paint job you will be getting alot more attension. GLWS man.

rb20hatch
12-04-2009, 10:13 AM
hey man i pm you with the mod list of my sc300

cpl dozier
12-05-2009, 09:35 AM
I bet if you give it a good paint job you will be getting alot more attension. GLWS man.

Car is being body worked as we speak. New color in a week will be Dark Metallic Purple and the wheels are being powder coated Aztek Gold. Also fenders were rolled and pulled a week ago. Looks great. Full interior is going in and will be black, after paint, I want to paint door jams and trunk also.

hey man i pm you with the mod list of my sc300

You pm'd me and then I checked your thread and your car is sold.

Holloway
12-06-2009, 11:20 PM
Why go with purple if your looking to sell it? I know it might be your thing...but it'd easier to sell if you painted it a more common color...like Skyline White or something

cpl dozier
12-07-2009, 10:45 PM
Well because if I am doing the work...I want it the way I want it...

Besides, once I do all this work, I will end up keeping the car I am sure. We will just have to see how it all turns out.

duballstar37
12-07-2009, 11:04 PM
In the startup video you forgot to put the radiator cap on and when he revs it shoots coolant out. Haha

Awesome car. GLWS!

staygold24
12-08-2009, 02:07 AM
Trade for sr s14? Check out my thread.

cpl dozier
12-08-2009, 05:49 AM
In the startup video you forgot to put the radiator cap on and when he revs it shoots coolant out. Haha

Awesome car. GLWS!



Wrong sir...First start up...Burping the radiator..

Smart guy!


Staygold- Nice car bro...But I will need some cash on top. PM me if still interested.

duballstar37
12-08-2009, 09:41 AM
Wrong sir...First start up...Burping the radiator..

Smart guy!


Staygold- Nice car bro...But I will need some cash on top. PM me if still interested.


Your knowledge prevails. Just looking out for you... didn't want to throw that thing on a dyno with no radiator cap. :rant:

cpl dozier
12-13-2009, 10:49 AM
Well cracked the rear bumper...So now pulling the origin kit off and going shark nose front end with factory rear end. Painting that way, and going on coilovers. Taking off the KYB shocks and Tein springs and selling them. Low and flush is the new game for this car along with the interior to be swapped and paint soon. Rear wing lip is also being removed.

cpl dozier
12-18-2009, 05:56 PM
Got 4 tickets...Price drop to 10k...Need this car gone.

titangts
12-18-2009, 11:06 PM
hey..empty your pm box so i can show you some pics and info man lol

cpl dozier
12-19-2009, 12:01 AM
Done...Sorry bro.

Holloway
12-19-2009, 12:06 AM
I would almost take this off your hands if it was skyline white.

Are you still dead set on purple?

cpl dozier
12-19-2009, 09:55 AM
Car is not painted yet....Do whatever color you want...I don't want to put anything else into it. I am done with it....You buy the paint, and I can get it sprayed if you buy the car.

Graeter
12-19-2009, 04:33 PM
Updated pictures?

cpl dozier
12-20-2009, 09:14 PM
Currently how the car sits...Losing the body kit. Going sharknose front with lip, no side skirts, factory rear to be put on. Also shaving the body lines. You can see the passenger side rear is already done. Thinking about shaving the third brake light. Weather has been crappy lately, so it has hindered the body work process. I will try to finish this week.


http://i19.photobucket.com/albums/b174/dozier1/1.jpg
http://i19.photobucket.com/albums/b174/dozier1/2.jpg
http://i19.photobucket.com/albums/b174/dozier1/3.jpg
http://i19.photobucket.com/albums/b174/dozier1/GetAttachment-1.jpg

TriniTT
12-20-2009, 10:57 PM
When did you take those pics? I was just in it yesterday and it looked a lot better than that.

cpl dozier
12-20-2009, 11:52 PM
Today...I took them just for this site.....

Pending trade in January.

cpl dozier
01-01-2010, 12:27 PM
Trade not going to happen...Still have car. Bump for new year.

aj906115
01-01-2010, 06:47 PM
trade for my 2004 srt4 < maybe we can work somthing out gets 23 city 30 hwy great epa and reliable lmk

cpl dozier
01-01-2010, 11:05 PM
Interested...Send me a pm.

mcwop23
01-05-2010, 12:33 PM
bump but doesn't the car get better mileage now after the LS swap? My LS2 RX7 gets ridiculous mileage (30+) when i stay off the throttle.

cpl dozier
01-05-2010, 03:32 PM
Exactly.....Stay off the throttle. And that is hwy mileage.

I drive in town. Stop and go for work. All day long. I can eat a tank in a days work. And it is not cheap. Now I can drive all day on the interstate and get good gas mileage. Just not stop and go. And not to mention even when I am on the interstate, I never get left alone. I have mustangs, camaros, vettes and rice boys trying to race all the time. So I usually put my foot down every now and then in fourth gear to let em see. Then they don't want to mess with the car after that.

s14gj
01-05-2010, 08:21 PM
what does the car look like now? how did u shave the body lines? what is your asking $$$ as is not paint?

cpl dozier
01-05-2010, 08:40 PM
Took this video today for someone interested in trading. If you pay attention to the video, it tells everything. But for people who don't listen....The front will be a sharknose, the rear will have a new hatch and rear bumper. It will be primered and ready for paint when I let it go. It is almost done. I need it to warm up just a little to continue the body work. Make me an offer...Cash talks.

YouTube - S13 LS6 like it sits currently. (http://www.youtube.com/watch?v=GhFB1U5YYOE)

s14gj
01-05-2010, 08:50 PM
so what did u use to shave the body lines??? did u just bondo them in??

cpl dozier
01-05-2010, 09:16 PM
Sanded down to the metal, then body filled in. The line is only maybe 1/8th of an inch deep. Not a big deal. I guess if I had access to a welder, I could have filled with weld and then ground down. I know what I am doing. It was done right.

nmssr08
01-05-2010, 10:22 PM
Sick engine bro. GLWS!!!

blueshark123
01-06-2010, 08:45 AM
Wish this car was an s14! GLWS man

bbturbo87
01-06-2010, 12:14 PM
hey i got a s13 with a/c KA-t. find my pics at silhou.tk (http://zilvia.net/f/silhou.tk), its the black one with RPF-1's. pm me how much would you need on top for the trade. its got 122k miles on the body, and its got a 100k mile kouki motor in it. q-tune(actual tune), a/c, ACT extreme clutch, powered by max rear arms, stance GR+ coils, mishimoto rad, AP hoses, ISIS front mount, tomei elbow, hks downpipe, cheap exhaust, 5 lug, front nismo studs, type-x tail lights and driver seat, aligned for drift/daily use.

cpl dozier
01-07-2010, 07:11 PM
Your link to the pics did not work. I also sent you a pm and have not received a response from you yet.

cpl dozier
01-11-2010, 08:27 PM
Still no response from you or pm.

SupaDoopa
01-11-2010, 10:06 PM
Trade for an EVO, you add.
http://zilvia.net/f/cars-sale/299145-2003-evolution-must-see.html

cpl dozier
01-12-2010, 09:02 AM
That's a sharp evo, but I don't have that kind of money bro. GLWS!

cpl dozier
01-14-2010, 10:14 AM
Bump to the top.

cpl dozier
01-18-2010, 11:42 PM
Update on car....

New fenders, chuki front bumper, new rear hatch, new rear bumper. Pics to come in a day or two.

cpl dozier
01-20-2010, 07:47 PM
New pig nose, fenders, rear hatch, and rear bumper. Shaved all body lines on the passenger side. Front driver side is shaved too. Ran out of time on the rear of the driver side. I will shave the window wiper on the hatch and the antenna hole later also.
http://i19.photobucket.com/albums/b174/dozier1/Picture024-1.jpg
http://i19.photobucket.com/albums/b174/dozier1/Picture025-1.jpg
http://i19.photobucket.com/albums/b174/dozier1/Picture026-1.jpg
http://i19.photobucket.com/albums/b174/dozier1/Picture027-1.jpg

AWDJosh
01-20-2010, 09:11 PM
hey man ill have those pics tomorrow for you its been raining cats and dogs here in pcola lol. why is the car in that last pic look like its leaning to the right side? jw thanks

cpl dozier
01-20-2010, 10:01 PM
Seriously? Uneven gravel driveway...Driveway is on a slope. The front wheel is in a small dip in the ground on the passenger side. Look at the pics.

AWDJosh
01-21-2010, 10:08 AM
thats what i thought i didnt know if a strut was blown though -_-

Royal_T
01-21-2010, 11:31 AM
Want to just sale the motor/trans??

cpl dozier
01-21-2010, 03:06 PM
Sure.....9k

LS1 block - 1500
LS6 intake manifold - 300
LS6 heads ported / polished - 1500
Titanium retainers - included in head price
Crane springs - included in head price
Crane valves 205/157 - included in head price
Hardened pushrods included
Comp cam custom grind 232/236-542/545 Lobe seperation 113 - 250
Ported LS2 oil pump - 150
LS2 front sump oil pan 300
Ported Throttle body 175
MAF no screen 150
34lb injectors 400
Custom 1-3/8th headers 1500
Custom mild steel coolant piping, no hoses 300
High torque starter 160
Steel braided high pressure power steering line 120
Billet steel cnc'd solid motor mounts 800
Custom subframe crossmember for motor included
Custom transmission mount included
Pro 5.0 shifter and short stick with Hurst leather shifter knob 150
Built T-56 6-speed transmission from Tick Performance for 700hp 3000
160 degree thermostat to keep it cool 60
Spec 3+ clutch and billet steel flywheel 850
Steel braided slave cylinder line and custom slave cylinder with mounting 120
CNC'd custom factory sway bar spacers to clear oil pan 65
Spliced wire harness to make it all work 300
Tuned by Henson Performance on a Dynocom 423whp and 423tq 300

So total comes up to. : 12,450.00

That doesn't include other goodies if you just buy the whole car.

cpl dozier
01-25-2010, 06:20 AM
Want to just sale the motor/trans??


You want it or no?

fortezza
01-25-2010, 08:52 AM
I bet if you give it a good paint job you will be getting alot more attension. GLWS man.



see i feel that your opinion is WRONG here because right now his car is primer-ed, so the new owner can paint it what ever color he/she wants, sooo.

EricDET
01-25-2010, 08:57 AM
see i feel that your opinion is WRONG here because right now his car is primer-ed, so the new owner can paint it what ever color he/she wants, sooo.
I gotta agree with the paint angle.. Anyone buying this car is obviously not wanting to do the work themselves therefore a complete car would undoubtedly sell better...

cpl dozier
01-26-2010, 08:07 PM
No worries...Paint coming soon...Then everyone will just bitch about it being Purple.

racerx2k1
01-27-2010, 11:57 AM
Too the top...

Bump to the top.

Got 4 tickets...Price drop to 10k...Need this car gone.

Trade not going to happen...Still have car. Bump for new year.

Bump to the top.

Update on car....

New fenders, chuki front bumper, new rear hatch, new rear bumper. Pics to come in a day or two.

No worries...Paint coming soon...Then everyone will just bitch about it being Purple.

2 bump limit. You can start new thread in 3 days.