Misc s-13 silvia front parts

[racepar1]

2x used kioto h3c bulbs for silvia front

Used kioto bulbs, still work fine.

SOLD!



S-13 silvia front bumper brackets & foam and 240sx bumper to fender brackets

These are for the JDM s-13 silvia fromt bumper. I also have one set of USDM 240sx bumper to fender brackets.

SOLD!!!



Twist lock clips for s-13 silvia headlights

These are the OE twist-lock clips that hold the boots onto the back of the s-13 silvia headlights. I have 6 of these from a set of headlights that I cannabilized.

5 still available...

$5 each

http://i275.photobucket.com/albums/jj283/racepar1/finalblowout016.jpg



S-13 silvia headlight wiring harness

This headlight harness was cut of a JDM silvia front clip, unfortuanetly I lost the other one. This is only for ONE SIDE. The headlight connector, foglight connector, bumper light connector, and running light connector are all on the harness. The signal light connector for the corner light is NOT part of the harness. This harness is also NOT plug and play! You must separate what you need and wire it up.

SOLD!

[racepar1]

First bump......

[lou's40sx]

Everything in first picture: $10. =) I'll take it.

[thundertiger25]

You don't happen to have the silvia bumper support brackets do you? (The ones that bolt the bumper to car)

[heylookatthat240]

PM'd you a few hours ago...

I work right next to you!!!

[DreamN]

You don't happen to have the silvia bumper support brackets do you? (The ones that bolt the bumper to car)

Use an 89/90 bumper support. You may have to notch the holes where the bolts go, but it works perfectly.

[thundertiger25]

Use an 89/90 bumper support. You may have to notch the holes where the bolts go, but it works perfectly.

OMG REALLY? That's awesome! THANK YOU SO MUCH! Sorry for the thread jack racepar1.

[blatantforchange]

pm'd....................