PDA

View Full Version : CA S14 KOGNITION CF radio delete panels LEGIT!

DALAZ_68
11-13-2009, 02:24 PM
I have these three panels

the 2 smaller panels I believe need some final fitting but otherwise should work fine

the holes were cut by the man himself (52mm)

the dragonfly sticker is on the larger panel only

pics bellow

these are quality pieces and im pretty sure they have become way harder to come by

http://i5.photobucket.com/albums/y162/whopper68/IMG_0411-1.jpg
http://i5.photobucket.com/albums/y162/whopper68/IMG_0414-1.jpg
http://i5.photobucket.com/albums/y162/whopper68/IMG_0415-1.jpg
http://i5.photobucket.com/albums/y162/whopper68/IMG_0413-1.jpg

anymore pics needed lemme know

smaller panels - 55 shipped + PP fees
large panel - SOLD SOLD


see below for kognition's response below:

The DIN panels are no longer in production. And those pictured are water jet cut. The S14 radio delete is still in production. You will need to taper the corners of the small DIN panels with 100 grit. And taper the back a little to fit into the DIN slot.
DALAZ_68
11-14-2009, 08:40 PM
bump to teh top...cmon peeps
DALAZ_68
11-17-2009, 11:01 AM
smaller panels still up for grabs
Max_PSi
11-17-2009, 03:00 PM
What size are the holes cut out to?
DALAZ_68
11-17-2009, 03:19 PM
52mm holes...cleanly done by Mike (kognition) himself...

first post updated for anyone wondering the size aswell
DALAZ_68
11-19-2009, 08:32 AM
final Bump...
bouncin_180
11-19-2009, 02:29 PM
any pixs of the smaller ones installed???
DALAZ_68
11-19-2009, 02:45 PM
any pixs of the smaller ones installed???


no...they replace the radio and lower section...its not that hard to imagine...

pertend the lower picture is an s14, the panel slides inthe same section
http://i49.photobucket.com/albums/f274/DrtyRat42/PIC-0209.jpg