racepar1
11-12-2009, 09:46 PM
Garage Defend lip spoiler for chuki front
This is un-questionably one of the best looking chuki lip spoilers available! Fitment is good, and it looks absolutely AWESOME! It is made of light weight fiberglass and is in good condition. It does have a couple small cracks right on the bottom edge of the lip, but is very easily fixable. It obviously needs paint as well.
1/2 amber chuki bumper lights
I bought these new less then a year ago. The passenger's side light does have a rock chip and a very small chip missing from the edge of it. These come with working bulbs, wiring, and are plug and play.
Custom ducted chuki front bumper assembly...
Included are:
-chuki bumper w/custom ducting and cut for tow hook
-chuki fender extensions w/brackets
-EXTREMELY lightened bumper support w/OMP tow hook
-OE bumper foam
-ALL necessary brackets for bumper
-and my custom fender support brackets
The ducting is single 3" outlet on the passenger's side and dual 3" outlet on the driver's side. I used them as brake ducts and an intake duct. The ducts are trimmed to fit the bumper vent holes quite well and are attached with screws. Unfortuanetly there was really no other mounting options because there just isn't any room. My fenders are pretty beat and I need them anyways so those cannot be included. I will include the chuki fender extensions w/brackets. I went kinda nuts with a plasma cutter on the front bumper support. It weighs maybe 1/4 of the original one (which weighs a metric shit ton). I also installed an OMP "FIA legal" tow hook and installed it on the support. I braced the mounting accordingly and it is very strong. The hole in the bumper for the tow hook came out quite nicely as well. I will also include some fender support brackets that I whipped up out of some aluminum flat stock. This is the brace that goes from the bottom edge of the front of the fender to the chasis, you know the ones that are always missing or damaged. It really helps the front end be a bit more rigid.
EVERYTHING IS SOLD!!!
This is un-questionably one of the best looking chuki lip spoilers available! Fitment is good, and it looks absolutely AWESOME! It is made of light weight fiberglass and is in good condition. It does have a couple small cracks right on the bottom edge of the lip, but is very easily fixable. It obviously needs paint as well.
1/2 amber chuki bumper lights
I bought these new less then a year ago. The passenger's side light does have a rock chip and a very small chip missing from the edge of it. These come with working bulbs, wiring, and are plug and play.
Custom ducted chuki front bumper assembly...
Included are:
-chuki bumper w/custom ducting and cut for tow hook
-chuki fender extensions w/brackets
-EXTREMELY lightened bumper support w/OMP tow hook
-OE bumper foam
-ALL necessary brackets for bumper
-and my custom fender support brackets
The ducting is single 3" outlet on the passenger's side and dual 3" outlet on the driver's side. I used them as brake ducts and an intake duct. The ducts are trimmed to fit the bumper vent holes quite well and are attached with screws. Unfortuanetly there was really no other mounting options because there just isn't any room. My fenders are pretty beat and I need them anyways so those cannot be included. I will include the chuki fender extensions w/brackets. I went kinda nuts with a plasma cutter on the front bumper support. It weighs maybe 1/4 of the original one (which weighs a metric shit ton). I also installed an OMP "FIA legal" tow hook and installed it on the support. I braced the mounting accordingly and it is very strong. The hole in the bumper for the tow hook came out quite nicely as well. I will also include some fender support brackets that I whipped up out of some aluminum flat stock. This is the brace that goes from the bottom edge of the front of the fender to the chasis, you know the ones that are always missing or damaged. It really helps the front end be a bit more rigid.
EVERYTHING IS SOLD!!!