PDA

View Full Version : ??Rare?? S13 electronic a/c...


Lukey13
11-11-2009, 05:09 PM
Bit of a different one here but does anyone out there have the same aircon unit and loom as this?
Im hoping someone who has broken a few S13's may be able to help as my one is pretty much butchered and I'd like to replace it...

As you will see from the pictures this is not a cable operated system so please take the time to check out the pics to find out if you have something to match it...

Ok, so normal looking front:
http://i116.photobucket.com/albums/o39/Hardcoretwist/CIMG6151.jpg

Then what it looks like from the back:
http://i116.photobucket.com/albums/o39/Hardcoretwist/CIMG6154.jpg

And some close-ups of the connector sockets:
http://i116.photobucket.com/albums/o39/Hardcoretwist/CIMG6166.jpg
http://i116.photobucket.com/albums/o39/Hardcoretwist/CIMG6158.jpg

And the loom plugs that go into the rear of the unit:
(seems to me there is one plug missing from my loom tho due to the small socket at the top left...)
http://i116.photobucket.com/albums/o39/Hardcoretwist/CIMG6160.jpg

And finally what I unplugged from the cars end of the loom:
http://i116.photobucket.com/albums/o39/Hardcoretwist/CIMG6169.jpg

So if anyone out there can help, please drop me a reply or pm
Thanks very much for looking people :x::x:

mrmephistopheles
11-12-2009, 12:24 AM
It's just the analog version of the automatic HVAC panel. You can plug the digital face onto the harness and (assuming you have everything hooked up properly), it'll work.

Not really rare - just not popular to have because it looks almost exactly like the US version.

Lukey13
11-12-2009, 03:45 AM
Sweet! Thanks dude :rawk:
But also from them photos could you tell me if Im missing a plug?
Just it looks to me like the top left behind the unit should have something in it and as you can see from my loom I only have the 2 black plugs and the white one. . . :x::x:

Jdm_of_miami
11-12-2009, 08:04 AM
I got the same one you have.. Are you looking for a replacement?

Lukey13
11-12-2009, 06:10 PM
Yep, from what I have now worked out I think this set-up is a simple swap for a dcc unit...
IF you have all the sensors - but I dont know what they look like or where to find them either!
Which parts do you have available the unit or the loom dude? Thanks

Jdm_of_miami
11-15-2009, 02:40 PM
The unit with some of the harness