Auto to manual Swap question.

[nissanspeed002]

Does anyone have a link of sorts to a swap link? I read a few in the FAQ section and tech section but i'm looking for something detailing the swap with a sr20 front clip. I need to know what i can use from the clip and what i will need to obtain from the junkyard etc. I'm going to do the swap in a 91 240sx if that helps. Any info or links to something would be appreciated.

[Jeff240sx]

It's gonna be the same man. Use the lower wiring harness for the sr, and if you don't have one, I'm 99% sure that the KA lower harness works.
-Jeff

[nissanspeed002]

But can i use the sr shift linkages and shifter itself? Also when you say lower harness what do you mean by that? The subharness for the manual tranny..and will taht be plug in play or will i need to splice? Thanks for the help.

[drift freaq]

ok to answer a few questions . all the shift stuff off your sr will work fine . Nissan trannies use a lot of universal parts.
If you are using the SR harness the tranny part will be on it. only automatics have a seperate unplugable sub harness . All Cars with manual trans had one piece engine trans harnesses

[nissanspeed002]

Thanks a lot. So essentially the only thing i'll need is the manual drive shaft, correct?

[drift freaq]

manual driveshaft should come with your SR clip. all you really need is the USDM clutch lines as the JDM clutch lines are RHD vs USDM LHD

[BeatJunky]

Heres a different question in Essentially the same topic...

Is swapping the S14 from AT to MT exactly the same process as swapping the S13 from AT to MT???
(what about parts/tools needed)

[drift freaq]

it is pretty much the same . the parts needed are listed in the faq section.
tools are pretty much your standard tools for working on the car.