View Full Version : MA s15 Helical diff in s13 Pumpkin
ichibans13.5
11-09-2009, 09:19 PM
S15 Helical Rear Diff with brand new Output shafts installed and Shimmed with backlash set by DSG (dent sport garage) then the rear cover was slighty polished, a new oem rear diff gasket was intalled and filled with motul fluid. I got around $850 into this.
For Sale picked up in Worcester MA $550 firm - will consider shipping secondly if you pay for shipping and the cost to make a wooden crate.
http://i15.photobucket.com/albums/a366/ThatsMR2u/DSC02064.jpg
http://i15.photobucket.com/albums/a366/ThatsMR2u/DSC00581.jpg
poziden
11-10-2009, 09:26 AM
what do i need to install this in an s14? how much for shipping/wooden crate?
jdmchuckiwill
11-10-2009, 01:19 PM
how is the lock up on this diff?
ive never seen this before
azndummie
11-10-2009, 02:14 PM
should fit on s14 fine, it locks up awesome for grip driving. i have one on my s14
ichibans13.5
11-13-2009, 09:02 AM
how is the lock up on this diff?
ive never seen this before
thanks azndummie - yes the lock is perfect fro grip driving- it is torque sensitive so it locks based on torque from the driveshaft- if your looking to specifically drift a clutch style would be better for you
what do i need to install this in an s14? how much for shipping/wooden crate?
it bolts in, I used some washers to space out the front though, because the s14 "ears" seemed to have more space in between.
how is the lock up on this diff?
ive never seen this before
it isn't a locking type differential, judging from your username it's outa your league :2f2f:
should fit on s14 fine, it locks up awesome for grip driving. i have one on my s14
again it doesn't lock
thanks azndummie - yes the lock is perfect fro grip driving- it is torque sensitive so it locks based on torque from the driveshaft- if your looking to specifically drift a clutch style would be better for you
doesn't lock, it is good for grip though.
not good for drift, better luck getting a welded or a 2-way clutch
nzmoman
11-14-2009, 07:32 AM
what do i need to install this in an s14? how much for shipping/wooden crate?
I put 6 1/2 inch washers on each side (3 on top three on bottom) you also need to put your S14 rear cover on it. I just did it. some of the best money I have ever spent on my car and it will last forever. $550 for a professionally installed unit isn't bad.
OP.
Mine was shipped in three boxes with foam and bubble wrap. It takes alot to damage them. Just make sure you protect the rear cover because its aluminum
ichibans13.5
11-15-2009, 12:08 PM
thanks for clarification JRas and shipping tips nzmoman!
Tenchuu
11-15-2009, 08:11 PM
I have one on my S13. all you need to put it on is a S14 or Z32 rear dif cover. you don't need any washers if you don't want to. it will bolt up just fine.
Syncade
11-16-2009, 10:04 AM
Im interested. Do you have reciepts from that shop?
ichibans13.5
11-16-2009, 06:57 PM
no but you can certainly call them up - DSG - DENT Sport Garage - Self Built. A sport garage in Norwood, MA. USA (http://www.dentsport.com/)
talk to bill or alex and tell them pierre's buddy derek
ichibans13.5
11-28-2009, 02:28 PM
bump it up
Charles33579
01-03-2010, 08:36 AM
This still available?
ichibans13.5
01-08-2010, 12:50 PM
charles yes it is!
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.