PDA

View Full Version : CA S14 KOGNITION CF radio delete panels LEGIT!

DALAZ_68
11-07-2009, 08:35 PM
I have these three panels

the 2 smaller panels I believe need some final fitting but otherwise should work fine

the holes were cut by the man himself

the dragonfly sticker is on the larger panel only

pics bellow

these are quality pieces and im pretty sure they have become way harder to come by

http://i5.photobucket.com/albums/y162/whopper68/IMG_0411-1.jpg
http://i5.photobucket.com/albums/y162/whopper68/IMG_0414-1.jpg
http://i5.photobucket.com/albums/y162/whopper68/IMG_0415-1.jpg
http://i5.photobucket.com/albums/y162/whopper68/IMG_0413-1.jpg

anymore pics needed lemme know

smaller panels - 65 shipped
large panel - 95 shipped
garagelu
11-07-2009, 09:42 PM
you want to throw up some prices?
JEDIs13
11-07-2009, 09:48 PM
do they make these for s13's??
windjunky
11-07-2009, 09:52 PM
where do the smaller 2 fit? look really square to fit vents. selling by piece?
Chue240sx
11-07-2009, 10:25 PM
what size are those holes on the big piece and the two small pieces? 52mm?
DrtyRat
11-07-2009, 11:51 PM
do they make these for s13's??

Not anymore.
spooled240
11-08-2009, 12:09 AM
where do the smaller 2 fit? look really square to fit vents. selling by piece?

i'm also wondering about this, do they cover both the DIN slots?
Finchie
11-08-2009, 12:24 AM
Not anymore.

I am pretty sure you can custom order them from Kognition.
JDM Sil4ty
11-08-2009, 04:07 AM
can we see a one of these mounted into an s14 ?
DALAZ_68
11-08-2009, 04:07 AM
you want to throw up some prices?

honestly its obo right now..need money for school for semester

do they make these for s13's??

I didnt make these...mr. Kognition did

where do the smaller 2 fit? look really square to fit vents. selling by piece?

the smaller ones take up just the radio/lower din space

yes selling by piece

what size are those holes on the big piece and the two small pieces? 52mm?


52mm
Not anymore.

damn right..for now anyway

i'm also wondering about this, do they cover both the DIN slots?

yes
I am pretty sure you can custom order them from Kognition.


yeah but ur gonna have to wait wut...a year and them some.if not longer
kognition
11-08-2009, 06:52 AM
The DIN panels are no longer in production. And those pictured are water jet cut. The S14 radio delete is still in production. You will need to taper the corners of the small DIN panels with 100 grit. And taper the back a little to fit into the DIN slot.
DALAZ_68
11-08-2009, 11:20 AM
The DIN panels are no longer in production. And those pictured are water jet cut. The S14 radio delete is still in production. You will need to taper the corners with 100 grit. And taper the back a little to fit into the DIN slot.

thank you sir :wiggle:
gotta240
11-08-2009, 01:38 PM
How much...
DALAZ_68
11-08-2009, 02:17 PM
ask and you shall recieve. first post updated
DreamN
11-09-2009, 06:45 PM
Steve could you measure them when you get a chance. Trying to figure out if I could use one of the small panels in my lower DIN space.
DALAZ_68
11-10-2009, 08:19 AM
the dimension are different, the S14 panel is actually smaller in width than the s13 panel, ill compare it to my s13 panel when i get home...