Driveshaft Carrier bolts size.

[rican_nick]

Q: Anyone have the thread/pitch and rough length for the 2 19mm carrier bearing bolts handy?

Mine decided to part ways with the car and in my buckets of bolts i cant find any..

pretty sure its m12x1.25.. but before I run to the fastener store i'd like to be a little more certain.

I searched couldnt find an exact answer on the length..


EDIT:
A: 10x1.25x35mm. I used 10x1.25x40mm.

[clark]

Anyone have the thread/pitch and rough length for the 2 19mm carrier bearing bolts handy?

Mine decided to part ways with the car and in my buckets of bolts i cant find any..

pretty sure its m12x1.25.. but before I run to the fastener store i'd like to be a little more certain.

I searched couldnt find an exact answer on the length..

well i can't answer your EXACT question, but I'm pretty sure the drive shaft carrier bolts are the same as your transmission cross member bolts.

if noone chimes in with definitive information, i'd say pop one off your tranny and see if you can thread it into the carrier bolt hole.

[rican_nick]

jacking it up to do just that.. hopefully get the length that way too.. appreciate it.

[Ben G]

orrr you could call your local nissan dealer and just ask....

[garagelu]

orrr you could call your local nissan dealer and just ask....

Do you really think the nissan dealer is willing to tell you the bolts specs for a certain bolt? Yea right. They won't waste their time with it. They will just look up the part and give you a price and then ask you if you want it or not.

[rican_nick]

thanks guys.

Anyways for anyone that may stumble across this thread the bolts for the carrier bearing are 10x1.25 x ~35mm. I used x40mm since it was all I had in 10x1.25.