PDA

View Full Version : OH 1997 240sx w/ black top


zixxer636
11-04-2009, 06:26 PM
I have a 1997 240 for sale that has 194000 on the chassis and about 50k on engine and trans. Car (http://www.sr20forum.com/#) is originally from GA and my friend from TX bought it and took it there. That's where it got the swap that cost him he said 8k just in parts and labor. I bought it from him after he did the swap and drove it all the way to Ohio. Car is currently located in columbus Ohio. It runs and drives great.

Engine: 9 out of 10
Comes with:
*HKS 3" Turbo back exhaust with JGY test pipe
*Greddy FMIC
*Greddy RS BOV
*Greddy Profec B type 2 boost controller (Low boost set to 10 and high at 15 currently...stock clutch wont hold any more power (http://www.sr20forum.com/#) then that)
*HKS Turbo timer
*Koyo Radiator with 2 electric fans

Interior: is probably a 8-10 because the the shifter trim panel has crack and so does the vents above it. And as you can see the one in the middle was destroyed im guessing by the shop or my friend...dunno why. There is also a cigarette burn on the PS seat not too big but the car came like that from GA.

Exterior: is where you get your money. There are 2 tiny dings on the back DS quarter panel and a um...basketball scuff i'd call it on the back PS quarter panel. Its not a dent and its not scratched but it wont come off in a car wash so I dunno what to call it. I'll try to get a pic of it so you can see what im talking about. The DS mirror is also cracked. So a few very small things that you probably wont notice in the pics but worth knowing.

http://i94.photobucket.com/albums/l101/zixxer636/Nissan.jpg
Blue Vacuum hose is now black...some shops?
http://i94.photobucket.com/albums/l101/zixxer636/Engine2.jpg
http://i94.photobucket.com/albums/l101/zixxer636/Rear.jpg
http://i94.photobucket.com/albums/l101/zixxer636/DriverSide.jpg
http://i94.photobucket.com/albums/l101/zixxer636/0928090915.jpg
The shifter trim has been wrapped in black vinyl to fix the crack it had, looks good. And I have made a trim piece for the radio since the shop demolished the factory one. I will get pics of this asap but it has a spot for the turbo timer, i reinstalled cig plug, and left space above deck for 2 gauges to be installed. Boost controller is also mounted where hazards and rear defrost are and they have been relocated to the outsides of that panel. This piece looks terrible and is being replaced but I am going to put the boost controller back in that spot because its BA right there.
http://i94.photobucket.com/albums/l101/zixxer636/0928090914.jpg

Asking $9,000

BoostedCoupe
11-04-2009, 07:33 PM
any trades? i have a 92 vert with some mods

zixxer636
11-05-2009, 09:17 AM
PM sent, bump

zixxer636
11-05-2009, 06:05 PM
Bump with pics of good and ugly interior pieces. I am replacing the top one that looks like death with stock fyi.
http://i94.photobucket.com/albums/l101/zixxer636/Dash3.jpg
The thing im holding is about the size of a 60mm gauge. Fit would look very nice.
http://i94.photobucket.com/albums/l101/zixxer636/Dash2.jpg
This piece we discovered was too brittle and difficult to get vinyl to overlap and glue wouldn't hold as you see......yikes
http://i94.photobucket.com/albums/l101/zixxer636/Dash1.jpg

zixxer636
11-11-2009, 08:50 PM
Bump, $9k will consider delivery depending on state. Sorry CA

zixxer636
11-12-2009, 11:19 AM
bump......

zixxer636
11-13-2009, 07:51 PM
no offers? times must be hard...

racerx2k1
11-13-2009, 08:07 PM
PM sent, bump

Bump, $9k will consider delivery depending on state. Sorry CA

bump......

no offers? times must be hard...

2 bump limit. You can start new thread in 3 days.