mpjustchilln
11-04-2009, 12:37 PM
96 S14 Silvia 240sx
Ok so here is the deal..
I recently blew a head gasket.. pulled the head off to replace it and discovered pitting on the #1 piston and block on the exhaust side.. detonation due to bad injector...
i :eek2: then :madfawk:.....
heres a crappy blurry sell pic...
http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs019.snc3/12633_1267784819014_1361630900_767322_2122428_n.jp g
I cant afford to do anything with this right now so i am going to sell the car or part it out if i dont get a buyer soon..
Steve at SR had the head machined,cleaned, and pressure tested last week. everything is perfect and its very shiny :naughty:
Engine
S15 Spec R SR20DET
TODA 272 Cams and Cam Gears
TODA Valve Springs
Signal Auto Ported Head
GReddy Head Gasket
Race Engineering Forged Pistons
Pauter Connecting Rods
Splitfire coilpacks
greddy spark plugs
550cc injectors
Koyo radiator
S15 turbo
S15 3" sidemount
Greddy Intake manifold
Trust 3" downpipe
3" test pipe
Greddy pulleys
turbonetics boost controller
HKS turbo timer
Apexi Power FC w/commander
Drivetrain
ACT 6 puck unsprung clutch
ACT flywheel
one piece driveshaft
Nismo gt pro 2 way diff
new rebuilt sr tranny
B&M Short shifter
nismo motor mounts
nismo tranny mount
billet subframe bushings
Suspension
Camber,caster,toe suspension arms...
Kei office adjustable coilovers
Wheels & tires
Sport max wheels
Dunlop in front 245/35/18
Hankook SP2 rear 265/35/18 not installed
s15 calipers not installed...
ICE
memphis speakers all the way around.
memphis 10” sub and box.
Memphis 5 channel 650watt.
battery relocation to rear.
Custom grounding kit.
AEM wideband gauge
Exterior
JDM s14 front bumper.
JDM SE front lip.
peeling paint.
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157477861409_1361630900_408310_5985274_n.jpg
The front is lower now.. looks alot better!
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157477901410_1361630900_408311_7666929_n.jpg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157477941411_1361630900_408312_1037818_n.jpg
http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157477981412_1361630900_408313_5771960_n.jpg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157478061414_1361630900_408315_5508844_n.jpg
http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157479061439_1361630900_408318_593534_n.jpg
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157479181442_1361630900_408321_7625801_n.jpg
the door has a dent in it.. some one backed into me.. but i have a new green door not yet installed.
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157483901560_1361630900_408335_7750290_n.jpg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157479341446_1361630900_408325_7362900_n.jpg
This set up made 250whp on side mount ic!!
YouTube - Marc Flyby (http://www.youtube.com/watch?v=xkPEm5mP0Vs)
Heres a vid running a 700whp 300zx.. yes its was just for fun this is just so u can hear it... i have the dyno vid somewhere..
I would rather sell this to some one who can put a new short block and be done but if i cant get enough money for it then i will part it out..
What it needs to work.
new shortblock. (it will work the way it is just not for ever.. steve at sr said maybe 10k miles)
new injectors.
head gasket and studs..
Clean title! 170k on car..
all the parts have 3k miles on them... yes 3k!
Please make me offers on the car and or parts!!
Pm or
[email protected]
Im in orange county off the 5 fwy and crown valley.
willing to ship parts aswell..
i also have
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs267.snc1/9432_1223304187026_1361630900_630346_2339136_n.jpg
Used Turbonetics turbo
60-1
Polished and jet hot coated
ball bearing
oil cooled
.58 a/r
twin scroll
T4 flange
3" v band flange
4" inlet
2.5" discharge
$800 obo
and a Bride Brix 2 seat. $500 obo
Ok so here is the deal..
I recently blew a head gasket.. pulled the head off to replace it and discovered pitting on the #1 piston and block on the exhaust side.. detonation due to bad injector...
i :eek2: then :madfawk:.....
heres a crappy blurry sell pic...
http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs019.snc3/12633_1267784819014_1361630900_767322_2122428_n.jp g
I cant afford to do anything with this right now so i am going to sell the car or part it out if i dont get a buyer soon..
Steve at SR had the head machined,cleaned, and pressure tested last week. everything is perfect and its very shiny :naughty:
Engine
S15 Spec R SR20DET
TODA 272 Cams and Cam Gears
TODA Valve Springs
Signal Auto Ported Head
GReddy Head Gasket
Race Engineering Forged Pistons
Pauter Connecting Rods
Splitfire coilpacks
greddy spark plugs
550cc injectors
Koyo radiator
S15 turbo
S15 3" sidemount
Greddy Intake manifold
Trust 3" downpipe
3" test pipe
Greddy pulleys
turbonetics boost controller
HKS turbo timer
Apexi Power FC w/commander
Drivetrain
ACT 6 puck unsprung clutch
ACT flywheel
one piece driveshaft
Nismo gt pro 2 way diff
new rebuilt sr tranny
B&M Short shifter
nismo motor mounts
nismo tranny mount
billet subframe bushings
Suspension
Camber,caster,toe suspension arms...
Kei office adjustable coilovers
Wheels & tires
Sport max wheels
Dunlop in front 245/35/18
Hankook SP2 rear 265/35/18 not installed
s15 calipers not installed...
ICE
memphis speakers all the way around.
memphis 10” sub and box.
Memphis 5 channel 650watt.
battery relocation to rear.
Custom grounding kit.
AEM wideband gauge
Exterior
JDM s14 front bumper.
JDM SE front lip.
peeling paint.
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157477861409_1361630900_408310_5985274_n.jpg
The front is lower now.. looks alot better!
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157477901410_1361630900_408311_7666929_n.jpg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157477941411_1361630900_408312_1037818_n.jpg
http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157477981412_1361630900_408313_5771960_n.jpg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157478061414_1361630900_408315_5508844_n.jpg
http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157479061439_1361630900_408318_593534_n.jpg
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157479181442_1361630900_408321_7625801_n.jpg
the door has a dent in it.. some one backed into me.. but i have a new green door not yet installed.
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157483901560_1361630900_408335_7750290_n.jpg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs016.snc1/4221_1157479341446_1361630900_408325_7362900_n.jpg
This set up made 250whp on side mount ic!!
YouTube - Marc Flyby (http://www.youtube.com/watch?v=xkPEm5mP0Vs)
Heres a vid running a 700whp 300zx.. yes its was just for fun this is just so u can hear it... i have the dyno vid somewhere..
I would rather sell this to some one who can put a new short block and be done but if i cant get enough money for it then i will part it out..
What it needs to work.
new shortblock. (it will work the way it is just not for ever.. steve at sr said maybe 10k miles)
new injectors.
head gasket and studs..
Clean title! 170k on car..
all the parts have 3k miles on them... yes 3k!
Please make me offers on the car and or parts!!
Pm or
[email protected]
Im in orange county off the 5 fwy and crown valley.
willing to ship parts aswell..
i also have
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs267.snc1/9432_1223304187026_1361630900_630346_2339136_n.jpg
Used Turbonetics turbo
60-1
Polished and jet hot coated
ball bearing
oil cooled
.58 a/r
twin scroll
T4 flange
3" v band flange
4" inlet
2.5" discharge
$800 obo
and a Bride Brix 2 seat. $500 obo